International Journal of Naval Architecture and Ocean Engineering

  • 제7권4호
  • /
  • Pages.720-738
  • /
  • 2015
  • /
  • 2092-6782(pISSN)
  • /
  • 2092-6790(eISSN)
대한조선학회 (The Society of Naval Architects of Korea)
권호 표지
DOI QR코드

DOI QR Code

Lab-scale impact test to investigate the pipe-soil interaction and comparative study to evaluate structural responses

  • Ryu, Dong-Man (Department of Naval Architecture and Ocean Engineering, Pusan National University) ;
  • Lee, Chi-Seung (Department of Naval Architecture and Ocean Engineering, Pusan National University) ;
  • Choi, Kwang-Ho (Department of Naval Architecture and Ocean Engineering, Pusan National University) ;
  • Koo, Bon-Yong (Korea Energy Technology Center, American Bureau of Shipping) ;
  • Song, Joon-Kyu (Korea Energy Technology Center, American Bureau of Shipping) ;
  • Kim, Myung-Hyun (Department of Naval Architecture and Ocean Engineering, Pusan National University) ;
  • Lee, Jae-Myung (Department of Naval Architecture and Ocean Engineering, Pusan National University)
  • 투고 : 2014.11.11
  • 심사 : 2015.05.07
  • 발행 : 2015.07.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This study examined the dynamic response of a subsea pipeline under an impact load to determine the effect of the seabed soil. A laboratory-scale soil-based pipeline impact test was carried out to investigate the pipeline deformation/strain as well as the interaction with the soil-pipeline. In addition, an impact test was simulated using the finite element technique, and the calculated strain was compared with the experimental results. During the simulation, the pipeline was described based on an elasto-plastic analysis, and the soil was modeled using the Mohr-Coulomb failure criterion. The results obtained were compared with ASME D31.8, and the differences between the analysis results and the rules were specifically investigated. Modified ASME formulae were proposed to calculate the precise structural behavior of a subsea pipeline under an impact load when considering sand- and clay-based seabed soils.

키워드

참고문헌

  1. ABAQUS, 2013. ABAQUS user's manual (Version 6.10). Rhode Island: Dssault Systemes.
  2. American Bureau of Shipping (ABS), 2008. Subsea pipeline systems. Houston: ABS.
  3. American Petroleum Institute (API) Recommended Practice 1111, 1999. Design, construction, operation, and maintenance of offshore hydrocarbon pipelines (Limit state design). Washington: API.
  4. American Petroleum Institute (API) 5L, 2008. Specification for line pipe. Washington: API.
  5. American Society of Mechanical Engineers (ASME) B31.8, 2010. Gas transmission and distribution piping systems. New York: ASME.
  6. ASTM Standard D136-06, 2005. Standard test methods for sieve analysis of fine and coarse aggregates. West Conshohocken: ASTM International.
  7. ASTM Standard D3080, 2004. Standard test methods for direct shear test of soils under consolidated drained conditions. West Conshohocken: ASTM International.
  8. ASTM Standard D4253-00, 2006. Standard test methods for maximum index density and unit weight of soils using a vibratory table. West Conshohocken: ASTM International.
  9. ASTM Standard D4254-00, 2006. Standard test methods for minimum index density and unit weight of soils and calculation of relative density. West Conshohocken: ASTM International.
  10. ASTM Standard D2573-08, 2001. Standard test methods for field vane shear test in cohesive soil. West Conshohocken: ASTM International.
  11. ASTM Standard D4318, 2010. Standard test methods for liquid limit, plastic limit, and plasticity index of soils. West Conshohocken: ASTM International.
  12. ASTM Standard D854-14, 2006. Standard test methods for specific gravity of soil solids by water pycnometer. West Conshohocken: ASTM International.
  13. Bazan, F.A.V. and Beck, A.T., 2013. Stochastic process corrosion growth models for pipeline reliability. Corrosion Science, 74, pp.50-58. https://doi.org/10.1016/j.corsci.2013.04.011
  14. Canadian Standards Association (CSA) Z662-07, 2007. Oil and gas pipeline systems. Ontario: CSA.
  15. Chang, S.C., Cerato, A.B. and Lutenegger, A.J., 2010. Modelling the scale effect of granular media for strength and bearing capacity. International Journal of Pavement Engineering, 11(5), pp.343-353. https://doi.org/10.1080/10298436.2010.488736
  16. CRC, 1997. Handbook of physical quantities. Boca Raton: CRC Press.
  17. Das, B.M., 1998. Principles of Geotechnical Engineering. Toronto: Cengage Learning.
  18. Det Norske Veritas (DNV) Offshore Standard F101, 2010. Submarine pipeline systems. Hovik: DNV.
  19. Hight, D.W. and Leroueil, S., 2003. Characterisation of soils for engineering purposes. Characterisation and Engineering Properties Natural Soils, 1, pp.255-360.
  20. International Organization for Standardization (ISO) 13623, 2009. Petroleum and natural gas industries - pipeline transportation systems. Geneva: ISO.
  21. Jones, N., Birch, S.E., Birch, R.S. and Zbu, L., 1992. An experimental study on the lateral impact of fully clamped mild steel pipes. Journal of Process Mechanical Engineering, 206, pp.111-127. https://doi.org/10.1243/PIME_PROC_1992_206_207_02
  22. Masaaki, I. and Kozo, K. 2000. Carbon content effect on high-strain-rate tensile properties for carbon steels. International journal of Impact Engineering, 24, pp.117-131. https://doi.org/10.1016/S0734-743X(99)00050-0
  23. Maziar, R. and Thomas, N., 2013. Strain based evaluation of dents in pressurized pipes. World Academy of Science, Engineering and Technology, 7, pp.97-102.
  24. Mertz, G.E., Lam, P.S. and Awadalla, N.G., 1993. Acceptance criteria for corroded carbon steel piping containing weld defects. American Society of Mechanical Engineers (ASME) Pressure Vessel and Piping Conference, Denver, CO, 25-29 July 1993, pp.1-8.
  25. NAVFAC, 1982. Foundations and earth structures. Washington, D.C.: Department of the Navy, Naval Facilities Engineering Command.
  26. Noronha, D.B., Martins, R.R., Jacob, B.P. and de Souza, E., 2010. Procedures for the strain based assessment of pipeline dents. International Journal of Pressure Vessels and Piping, 87, pp.254-265. https://doi.org/10.1016/j.ijpvp.2010.03.001
  27. Pinheiro, B.C. and Pasqualino, I.P., 2009. Fatigue analysis of damaged steel pipelines under cyclic internal pressure. International Journal Fatigue, 31, pp.962-973. https://doi.org/10.1016/j.ijfatigue.2008.09.006
  28. Poulos, H.G., 2005. Piled raft and compensated piled raft foundation for soft soil sites. Advances in designing and testing deep foundation, American Society of Civil Engineers, 129, pp.214-235.
  29. Rafi, A.N.M., Richard, K., Wang, R., Das, S., Hossein, G. and Jorge, S., 2012. Revisiting ASME strain-based dent evaluation criterion. Journal of Pressure Vessel Technology, 134, pp.041101-1-041101-7. https://doi.org/10.1115/1.4005890
  30. Terzaghi, K., Ralph, B.P. and Mesri, G., 1996. Soil mechanics in engineering practice. New York: John Wiley & Sons.
  31. Vesic, A.S., 1971. Breakout resistance of objects embedded in ocean bottom. Journal of the Soil Mechanics and Foundation Division, 97(9), pp.1183-1205.
  32. Xue, J.A., 2006. Non-linear finite-element analysis of buckle propagation in subsea corroded pipelines. Finite Elements in Analysis and Design, 42, pp.1211-1219. https://doi.org/10.1016/j.finel.2006.05.003
  33. Yang, J.L., Lu, G.Y., Yu, T.X. and Reid, S.R., 2009. Experimental study and numerical simulation of pipe-on-pipe impact. International Journal of Impact Engineering, 36, pp.1259-1268. https://doi.org/10.1016/j.ijimpeng.2009.05.001
  34. Yu, S.Y., Choi, H.S., Lee, S.K., Do, C.H. and Kim, D.K., 2013. An optimum design of on-bottom stability of offshore pipelines on soft clay. International Journal of Naval Architecture and Ocean Engineering, 5, pp.598-613. https://doi.org/10.2478/IJNAOE-2013-0156
  35. Zeinoddini, M., Arabzadeh, H., Ezzati, M. and Parke, G.A.R., 2013. Response of submarine pipelines to impacts from dropped objects: Bed flexibility effects. International Journal of Impact Engineering, 62, pp.129-141. https://doi.org/10.1016/j.ijimpeng.2013.06.010

피인용 문헌

  1. Comparative study on deformation and mechanical behavior of corroded pipe: Part I-Numerical simulation and experimental investigation under impact load vol.9, pp.5, 2017, https://doi.org/10.1016/j.ijnaoe.2017.01.005
  2. Experimental investigations on seismic response of riser in touchdown zone vol.10, pp.3, 2018, https://doi.org/10.1016/j.ijnaoe.2017.08.005
  3. Experimental Study on the Distribution of Wave-Induced Excess Pore Pressure in a Sandy Seabed around a Mat Foundation vol.7, pp.9, 2015, https://doi.org/10.3390/jmse7090304