참고문헌
- J. B. Heywood, "Internal Combuston Engine Fundamentals", McGraw-Hill, 1988.
- H. Hiroyasu and M. Arai, "Structures of Fuel Sprays in Diesel Engines", SAE Technical Paper 900475, 1990.
- J. Dec, "Advanced Compression-Ignition Engines-Understanding the In-cylinder Processes", Proc. of Combustion Inst., Vol. 32, No. 2, 2009, pp. 2727-2742. https://doi.org/10.1016/j.proci.2008.08.008
- T. Kamimoto and M. Bae, "High Combustion Temperature for the Reduction of Particulate in Diesel Engines", SAE Technical Paper 880423, 1988.
- D. Flowers, S. Aceves and A. Babajimopoulos, "Effect of Charge Non-uniformity on Heat Release and Emissions in PCCI Engine Combustion", SAE Technical Paper 2006-01-1363, 2006.
- N. Shimazaki, T. Tsurushima and T. Nishimura, "Dual Mode Combustion Concept With Premixed Diesel Combustion by Direct Injection Near Top Dead Center," SAE Technical Paper 2003-01-0742, 2003.
- P. Risberg, G. Kalghatgi and H. Angstrom, "Auto-ignition Quality of Gasoline-Like Fuels in HCCI Engines", SAE Technical Paper 2003-01-3215, 2003.
- G. Kalghatgi, "Auto-Ignition Quality of Practical Fuels and Implications for Fuel Requirements of Future SI and HCCI Engines", SAE Technical Paper 2005-01-0239, 2005.
- G. Kalghatgi, P. Risberg and H. Angstrom, "Advantages of Fuels with High Resistance to Auto-ignition in Late-injection, Low-temperature, Compression Ignition Combustion", SAE Technical Paper 2006-01-3385, 2006.
- K. Kim, D. Kim and C. Bae, "Spray and Combustion Characteristics of Gasoline and Diesel in a Direct Injection Compression Ignition Engine", Fuel, Vol. 109, 2013, pp. 616-626. https://doi.org/10.1016/j.fuel.2013.02.060
- G. Settles, "Schlieren and Shadowgraph Techniques: Visualizing Phenomena in Transparent Media," Springer, 2006.
- D. Siebers, "Scaling Liquid-Phase Fuel Penetration in Diesel Sprays Based on Mixing-Limited Vaporization," SAE Technical Paper 1999-01-0528, 1999.
- S. Kook and L. Pickett, "Liquid Length and Vapor Penetration of Conventional, Fischer-Tropsch, Coal-derived, and Surrogated Fuel Sprays at High-Temperature and High-Pressure Ambient Conditions," Fuel, Vol. 93, 2012, pp. 539-548. https://doi.org/10.1016/j.fuel.2011.10.004
- R. Canaan, J. Dec, R. Green and D. Daly, "The Influence of Fuel Volatility on the Liquid-Phase Fuel Penetration in a Heavy-Duty D.I. Diesel Engine," SAE Technical Paper 980510, 1998.
- A. Montanaro, M. Migliaccio, L. Allocca, V. Fraioli, S. Lee, A. Zhang and J. Naber, "Schlieren and Mie Scattering Visualization for Single-Hole Diesel Injector under Vaporizing Conditions with Numerical Validation," SAE Technical Paper 2014-01-1406, 2014.
- C. Espey and J. Dec, "The Effect of TDC Temperature and Density on the Liquid-Phase Fuel Penetration in a D.I. Diesel Engine*", SAE Technical Paper 952456, 1995.
- B. Fisher and C. Mueller, "Effects of Injection Pressure, Injection-Rate Shape, and Heat Release on Liquid Length", SAE Int. J. Engines, Vol. 5, No. 2, 2012, pp. 415-429. https://doi.org/10.4271/2012-01-0463
- K. Nishida, J. Gao, T. Manabe and Y. Zhang, "Spray and mixture properties of evaporating fuel spray injected by hole-type direct injection diesel injector", Int. J. Engine Res., Vol. 9, 2008, pp. 347-360. https://doi.org/10.1243/14680874JER00508