Earthquakes and Structures

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Hardening slip model for reinforcing steel bars

  • Braga, Franco (Department of Structural Engineering and Geotechnics, University of Rome "La Sapienza") ;
  • Caprili, Silvia (Department of Civil and Industrial Engineering, University of Pisa) ;
  • Gigliotti, Rosario (Department of Structural Engineering and Geotechnics, University of Rome "La Sapienza") ;
  • Salvatore, Walter (Department of Civil and Industrial Engineering, University of Pisa)
  • Received : 2014.07.04
  • Accepted : 2015.04.02
  • Published : 2015.09.25
⟨ Previous Next ⟩

Abstract

A new constitutive model for the representation of the seismic behaviour of steel bars including hardening phenomena is presented. The model takes into account relative slip between bars and concrete, necessary for the estimation of the structural behaviour of r.c. elements and of the level of strain induced by earthquakes on bars. The present work provides the analytical formulation of the post-yielding behaviour of reinforcements, resulting in a continuous axial stress-slip relationship to be implemented in engineering software. The efficacy of the model is proved through the application to a cantilever column, for whose bars the constitutive law is derived.

Keywords

References

  1. Barry, M., Parrish, M. and Eberhard, M. (2004), PEER Structural Performance Database - User's manual Pacific Earthquake Engineering Research Center University of California, Berkeley.
  2. Braconi, A., Braga, F., Caprili, S., Gigliotti, R. and Salvatore, W. (2012), "Ductility demand on steel reinforcing bars in concrete buildings", Proceedings of 11th International Conference on Computational Structures Technology, Dubrovnik, Croatia.
  3. Braconi, A., Braga, F., Caprili, S., Gigliotti, R. and Salvatore, W. (2013), "Influence of low-cycle fatigue and corrosion phenomena on the ductile behaviour of steel reinforcing bars", 4th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, Kos Island, Greece.
  4. Braconi, A., Braga, F., Caprili, S., Gigliotti, R. and Salvatore, W. (2014), "Seismic demand on steel reinforcing bars in reinforced concrete frame structures", Bull. Earthq. Eng., 12(6), 2633-2664. https://doi.org/10.1007/s10518-014-9596-y
  5. Braga, F., Gigliotti, R. and Laterza, M. (2006), "Analytical stress-strain relationship for concrete confined by steel stirrups and/or FRP jackets", J. Struct. Eng., 132(9), 1402-1416. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:9(1402)
  6. Braga, F., Gigliotti, R., Laterza, M., D'Amato, M. and Kunnath, S. (2012), "Modified steel bar model incorporating bond-slip for seismic assessment of concrete structures", J. Struct. Eng., 138(11), 1342-1350. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000587
  7. Braga, F., Gigliotti, R., Laterza, M. and D'Amato, M. (2009), "Modellazione non lineare di strutture esistenti in c.a.: confronti con risultati sperimentali", ANIDIS 2009-XIII Convegno ANIDIS "L' ingegneria Sismica in Italia", Bologna, Italia.
  8. Caprili, S. and Salvatore, W. (2015), "Cyclic behaviour of uncorroded and corroded steel reinforcing bars", Constr. Build. Mater., 76, 168-186. https://doi.org/10.1016/j.conbuildmat.2014.11.025
  9. CEB-FIP Model Code 1990 Design Code (1993), Comite Euro-International du Beton.
  10. Ciampi, V., Eligenhausen, R., Popov, E.P. and Bertero, V.V. (1983), "Analytical model tor deformed bar bond under generalized excitations", Report EERC 82-23, Earthquake Engineering Research Center, University of California, Berkley.
  11. D. M. Infrastrutture Trasporti 14 gennaio 2008 (2008), Norme Tecniche per le Costruzioni, Italy.
  12. D'Amato, M. (2009), "Analytical models for non linear analysis of RC structures: confined concrete and bond-slip of longitudinal bars", Ph.D. Dissertation, University of Basilicata, Italy.
  13. D'Amato, M., Braga, F., Gigliotti, R., Kunnath, S. and Laterza, M. (2012), "Validation of a modified steel bar model incorporating bond-slip for seismic assessment of concrete structures", J. Struct. Eng., 138(11), 1351-1360. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000588
  14. Dodd, L.L. and Restrepo-Posada, J.I. (1995), "Model for predicting cyclic behavior of reinforcing steel", J. Struct. Eng., 121(3), 433-445. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:3(433)
  15. EN 1998-1 (2005), Eurocode 8 - Design of structures for earthquake resistance - Part 1: General rules, seismic actions and rules for buildings.
  16. Fabbrocino, G., Verderame, G.M., Manfredi, G. and Cosenza, E. (2004), "Structural models of critical regions in old-type r.c. frames with smooth rebars", Eng. Struct., 26(14), 2137-2148. https://doi.org/10.1016/j.engstruct.2004.07.018
  17. Gigliotti, R. (2002), "RC structures designed for gravity loads: experimental tests on beam-column joints", Ph.D. Dissertation, University of Salerno and University of Basilicata, Italy.
  18. Gomes, A. and Appleton, J. (1997), "Nonlinear cyclic stress-strain relationship of reinforcing bars including buckling", Eng. Struct., 19(10), 822-826. https://doi.org/10.1016/S0141-0296(97)00166-1
  19. Hakuto, S., Park, R. and Tanaka, H. (1999), "Effect of deterioration of bond of beam bars passing through interior beam-column joints on flexural strength and ductility", ACI Struct. J., 96(S94), 858-864.
  20. Keuser, M. and Mehlhorn, G. (1987), "Finite element models for bond problems", J. Struct. Eng., 113(ST10), 2160-2173. https://doi.org/10.1061/(ASCE)0733-9445(1987)113:10(2160)
  21. Limkatanyu, S. and Spacone, E. (2008), "Non linear analysis of reinforced concrete frames including bondslip effects", 14th World Conference on Earthquake Engineering, October 12-17, 2008, Beijing, China.
  22. Lowes, L. and Altoontash, A. (2003), "Modeling reinforced-concrete beam-column joints subjected to cyclic loading", J. Struct. Eng., 129(12), 1686- 1697. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:12(1686)
  23. Mander, J.B., Priestley, M.J.N. and Park, R. (1984), "Seismic design of bridge piers", Research Report No. 84-2, Department of Civil Engineering, University of Canterbury, New Zealand.
  24. Mazzoni, S., McKenna, F., Scott, M.H. and Fenves, G.L. (2007), OpenSees Command Language Manual, University of California, Berkley, USA.
  25. Menegotto, M. and Pinto, P. (1973), "Method of analysis for cyclically loaded RC plane frames including changes in geometry and non-elastic behavior of elements under combined normal force and bending", Proceedings of Symposium Resistance and Ultimate Deformability of Structures Acted on by Well- Defined Repeated Loads, IABSE Reports, 13, 15-22.
  26. Monti, G. and Nuti, C. (1992), "Nonlinear cyclic behaviour of reinforcing bars including buckling", J. Struct. Eng., 118(12), 3268-3284. https://doi.org/10.1061/(ASCE)0733-9445(1992)118:12(3268)
  27. Monti, G., Filippou, F.C. and Spacone, E. (1997), "Finite element for anchored bars under cyclic load reversals", J. Struct. Eng., 123(5), 614-623. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:5(614)
  28. Monti, G., Spacone, E. and Filippou, F.C. (1993), "Model for anchored reinforcing bars under seismic action", Report to the National Science Foundation, University of California, Berkley.
  29. Ngo, D. and Scordelis, A.C. (1969), "Finite element analysis of reinforced concrete beams", J. ACI, 64(3), 153-165.
  30. Panagiotakos, T.B. and Fardis, M.N. (2001), "Deformations of reinforced concrete members at yielding and ultimate", ACI Struct. J., 98(2), 135-148.
  31. Paulay, T. and Priestley, M.N.J. (1992), Seismic Design of Reinforced Concrete and Masonry Buildings, John Wiley & Sons, Inc., New York.
  32. Bertero, V.V. and Popov, E.P. (1977), "Seismic behavior of ductile moment-resisting reinforced concrete frames. Reinforced concrete structures in seismic zones", SP-53, American Concrete Institute, Detroit.
  33. Rubiano-Benavides, N.R. (1998), "Predictions of the inelastic seismic response of concrete structures including shear deformations and anchorage slip", Ph.D. Dissertation, University of Texas, Austin, USA.
  34. Saatcioglu, M. and Ozcebe, G. (1989), "Response of reinforced concrete columns to simulated seismic loading", ACI Struct. J., 86(1), 3-12.
  35. Tanaka, H. and Park, R. (1990), "Effect of lateral confining reinforcement on the ductile behaviour of reinforced concrete columns", Report 90-2, Department of Civil Engineering, University of Canterbury.
  36. Teran-Gilmore, A. and Jirsa, O. (2007), "Energy demands for seismic design against low-cycle fatigue", Earthq. Eng. Struct., 36(3), 383-404. https://doi.org/10.1002/eqe.663
  37. Vecchio, F.J. and Collins, M.P. (1986), "The modified compression field theory for reinforced concrete elements subjected to shear", ACI Struct. J., 83(2), 219-231.
  38. Verderame, G.M., Fabbrocino, G., Manfredi, G. and Cosenza, E. (2001), "Analisi sperimentale dell'ancoraggio di barre lisce da cemento armato mediante beam-test", X Congresso Nazionale "L'ingegneria sismica in Italia", Potenza-Matera.

Cited by

  1. Influence of Tension Stiffening on the Flexural Stiffness of Reinforced Concrete Circular Sections vol.10, pp.6, 2017, https://doi.org/10.3390/ma10060669
  2. Mechanical Performance versus Corrosion Damage Indicators for Corroded Steel Reinforcing Bars vol.2015, 2015, https://doi.org/10.1155/2015/739625
  3. Modeling of gravity-designed RC sub-assemblages subjected to lateral loads vol.130, 2017, https://doi.org/10.1016/j.engstruct.2016.10.044
  4. A new generation of high-ductile Dual-Phase steel reinforcing bars vol.179, pp.None, 2015, https://doi.org/10.1016/j.conbuildmat.2018.05.181
  5. Structural Assessment and Upgrading for an Old Building Belonging to an Historical Multi-Sports Center in Naples vol.5, pp.None, 2015, https://doi.org/10.3389/fbuil.2019.00023
  6. Seismic performance of full-scale RC columns containing high proportion recycled aggregate vol.17, pp.11, 2015, https://doi.org/10.1007/s10518-019-00687-0
  7. Tests and Simulation of the Bond-Slip between Steel and Concrete with Recycled Aggregates from CDW vol.11, pp.2, 2015, https://doi.org/10.3390/buildings11020040