Computers and Concrete

  • 제16권3호
  • /
  • Pages.467-485
  • /
  • 2015
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Determination of lateral strength and ductility characteristics of existing mid-rise RC buildings in Turkey

  • Ucar, Taner (Department of Architecture, Dokuz Eylul University) ;
  • Merter, Onur (Department of Civil Engineering, Dokuz Eylul University) ;
  • Duzgun, Mustafa (Department of Civil Engineering, Dokuz Eylul University)
  • 투고 : 2015.07.21
  • 심사 : 2015.08.18
  • 발행 : 2015.09.25
⟨ 이전 논문 다음 논문 ⟩

초록

This paper presents a comprehensive work on determination of yield base shear coefficient and displacement ductility factor of three to eight story actual reinforced concrete buildings, instead of using generic frames. The building data is provided by a walkdown survey in different locations of the pilot areas. Very detailed three dimensional models of the selected buildings are generated by using the data provided in architectural and reinforcement projects. Capacity curves of the buildings are obtained from nonlinear static pushover analyses and each capacity curve is approximated with a bilinear curve. Characteristic points of capacity curve, the yield base shear capacity, the yield displacement and the ultimate displacement capacity, are determined. The calculated values of the yield base shear coefficients and the displacement ductility factors for directions into consideration are compared by those expected values given in different versions of Turkish Seismic Design Code. Although having sufficient lateral strength capacities, the deformation capacities of these typical mid-rise reinforced concrete buildings are found to be considerably low.

키워드

참고문헌

  1. Akkar, S., Sucuoglu, H. and Yakut, A. (2005), "Displacement-based fragility functions for low- and mid-rise ordinary concrete buildings", Earthq. Spectra., 21(4), 901-927. https://doi.org/10.1193/1.2084232
  2. Arslan, M.H. (2012), "Estimation of curvature and displacement ductility in reinforced concrete buildings", KSCE. J. Civil. Eng., 16(5), 759-770. https://doi.org/10.1007/s12205-012-0958-1
  3. ATC-19 (1995), "Structural response modification factors", Applied Technology Council, Redwood City, California.
  4. ATC-40 (1996), "Seismic evaluation and retrofit of concrete building", Applied Technology Council, Redwood City, California.
  5. Aydinoglu, M.N. (2003), "An incremental response spectrum analysis procedure based on inelastic spectral displacements for multi-mode seismic performance evaluation", Bull. Earthq. Eng., 1(1), 3-36. https://doi.org/10.1023/A:1024853326383
  6. Borzi, B. and Elnashai, A.S. (2000), "Refined force reduction factors for seismic design", Eng. Struct., 22(10), 1244-1260. https://doi.org/10.1016/S0141-0296(99)00075-9
  7. Carrillo, J., Gonzalez, G. and Rubiano, A. (2014), "Displacement ductility for seismic design of RC walls for low-rise housing", Latin. Am. J. Solids. Struct., 11(4),725-737. https://doi.org/10.1590/S1679-78252014000400010
  8. Chopra, A.K. and Goel, R.K. (2002), "A modal pushover analysis procedure for estimating seismic demands for buildings", Earthq. Eng. Struct. Dyn., 31(3), 561-582. https://doi.org/10.1002/eqe.144
  9. Computers and Structures Inc. (2011), SAP2000: Integrated Structural Analysis and Design Software, CSI, Version 15.1.0, Berkeley, CA.
  10. Costa, A., Romao, X. and Oliveira, C.S. (2010), "A methodology for the probabilistic assessment of behaviour factors", Bull. Earthq. Eng., 8(1), 47-64. https://doi.org/10.1007/s10518-009-9126-5
  11. Earthquake Damage Scenario and Earthquake Master Plan for the City of Izmir (1998), Research Project, Bogazici University, Istanbul.
  12. Earthquake Risk Assessment for Istanbul Metropolitan Area (2002), Executive Summary, Department of Earthquake Engineering, Kandilli Observatory and Earthquake Research Institute of Bogazici University, Istanbul.
  13. Elnashai, A.S. and Mwafy, A.M. (2002), "Overstrength and force reduction factors of multistorey reinforced-concrete buildings", Struct. Des. Tall. Build., 11(5), 329-351. https://doi.org/10.1002/tal.204
  14. Ellingwood, B.R. (2001), "Earthquake risk assessment of building structures", Reliab. Eng. Syst. Safe., 74(3), 251-262. https://doi.org/10.1016/S0951-8320(01)00105-3
  15. Faella, G., Aldo Giordano, A. and Mezzi, M. (2004), "Definition of suitable bilinear pushover curves in nonlinear static analyses", Proceedings of the 13th World Conference on Earthquake Engineering, Vancouver, Canada.
  16. FEMA-356 (2000), Prestandard and commentary for the seismic rehabilitation of building, Federal Emergency Management Agency, Washington DC.
  17. Gupta, B. and Kunnath, S.K. (2000), "Adaptive spectra-based pushover procedure for seismic evaluation of structures", Earthq. Spectra., 16(2), 367-391. https://doi.org/10.1193/1.1586117
  18. Kappos, A.J. (1999), "Evaluation of behaviour factors on the basis of ductility and overstrength studies", Eng. Struct., 21(9), 823-835. https://doi.org/10.1016/S0141-0296(98)00050-9
  19. Korkmaz, K.A. (2005), "Reliability based performance analysis of structural systems", Ph.D. Dissertation, Dokuz Eylul University, Izmir, Turkey.
  20. Korkmaz, K.A., Kayhan, A.H. and Ucar, T. (2013), "Seismic assessment of R/C residential buildings with infill walls in Turkey", Comput. Concrete., 12(5), 681-695. https://doi.org/10.12989/cac.2013.12.5.681
  21. Krawinkler, H. and Nassar, A.A. (2005), "Seismic design based on ductility and cumulative damage demands and capacities", Nonlinear Seismic Analysis and Design of Reinforced Concrete Buildings, Ed. Fajfar, P., Krawinkler, H., Elsevier Science Publishers Ltd., England and USA.
  22. Lam, N., Wilson, J. and Hutchinson, G. (1998), "The ductility reduction factor in the seismic design of buildings", Earthq. Eng. Struct. Dyn., 27(7), 749-769. https://doi.org/10.1002/(SICI)1096-9845(199807)27:7<749::AID-EQE761>3.0.CO;2-L
  23. Lee, L.H., Han, S.W. and Oh, Y.H. (1999), "Determination of ductility factor considering different hysteretic models", Earthq. Eng. Struct. Dyn., 28(9), 957-977. https://doi.org/10.1002/(SICI)1096-9845(199909)28:9<957::AID-EQE849>3.0.CO;2-K
  24. Mander, J.B., Priestley, M.J.N. and Park, R. (1988), "Theoretical stress-strain model for confined concrete", J. Struct. Div., 114(8), 1804-1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804)
  25. Mwafy A.M. (2002), "Seismic performance of code-designed RC buildings", Ph.D. Dissertation, Imperial College, London.
  26. Park, R. (1988), "Ductility evaluation from laboratory and analytical testing", Proceedings of the Ninth World Conference on Earthquake Engineering, Tokyo-Kyoto, Japan.
  27. Park, R. (1989), "Evaluation of ductility of structures and structural assemblages from laboratory testing", Bull. New. Zeal. Nat. Soc. Earthq. Eng., 22(3), 155-166.
  28. Paulay, T. (2002), "An estimation of displacement limits for ductile systems", Earthq. Eng. Struct. Dyn., 31(3), 583-599. https://doi.org/10.1002/eqe.157
  29. Paulay, T. (2003), "Seismic displacement capacity of ductile reinforced concrete building systems", Bull. New. Zeal. Soc. Earthq. Eng., 36(1), 47-65.
  30. Paulay T. and Priestley M.J.N. (1992), "Seismic Design of Reinforced Concrete and Masonry Buildings", John Wiley & Sons, Inc., New York, NY, USA.
  31. Priestley, M.J.N., Calvi, G.M. and Kowalsky, M.J. (2007), "Direct displacement-based seismic design of structures", Proceedings of the New Zealand Society for Earthquake Engineering Conference, New Zealand.
  32. Priestley, M.J.N. and Park, R. (1987), "Strength and ductility of concrete bridge columns under seismic loading", ACI. Struct. J., 84(1), 61-76.
  33. Sullivan, T.J., Calvi, G.M. and Priestley, M.J.N. (2004), "Initial stiffness versus secant stiffness in displacement based design", Proceedings of the 13th World Conference on Earthquake Engineering, Vancouver, Canada.
  34. Tawfik, A.S., Badr, M.R. and Zanaty, A.E. (2014), "Behavior and ductility of high strength reinforced concrete frames", HBRC. J., 10(2), 215-221. https://doi.org/10.1016/j.hbrcj.2013.11.005
  35. Taieb, B. and Sofiane, B. (2014), "Accounting for ductility and overstrength in seismic design of reinforced concrete structures", Proceedings of the 9th International Conference on Structural Dynamics, EURODYN 2014, Porto, Portugal.
  36. Tiwari, A.K. and Gupta, V.K. (2000), "Scaling of ductility and damage-based strength reduction factors for horizontal motions", Earthq. Eng. Struct. Dyn., 29(7), 969-987. https://doi.org/10.1002/1096-9845(200007)29:7<969::AID-EQE948>3.0.CO;2-N
  37. Tjhin, T.N., Aschheim, M.A. and Wallace, J.W. (2004), "Yield displacement estimates for displacement-based seismic design of ductile reinforced concrete structural wall buildings", Proceedings of the 13th World Conference on Earthquake Engineering, Vancouver, Canada.
  38. TS-500 (2000), "Requirements for design and construction of reinforced concrete structures", Turkish Standards Institution, Ankara.
  39. TSDC (1975), Turkish seismic design code, Ministry of Public Works and Settlement, Ankara.
  40. TSDC (2007), Turkish seismic design code, Ministry of Public Works and Settlement, Ankara.
  41. Uang, C.M. (1991), "Establishing R (or $R_w$) and $C_d$ factors for building seismic provisions", J. Struct. Eng., 117(1), 19-28. https://doi.org/10.1061/(ASCE)0733-9445(1991)117:1(19)
  42. Uang, C.M. (1992), "Seismic force reduction and displacement amplification factors", Proceedings of the Tenth World Conference on Earthquake Engineering, Madrid, Spain.
  43. Uang, C.M. and Maarouf, A. (1994), "Deflection amplification factor for seismic design provisions", J. Struct. Eng., 120(8), 2423-2436. https://doi.org/10.1061/(ASCE)0733-9445(1994)120:8(2423)
  44. Varela, J.L., Tanner, J.E. and Richard, E.K. (2006), "Development of seismic force reduction and displacement amplification factors for autoclaved aerated concrete structures", Earthq. Spectra., 22(1), 267-286. https://doi.org/10.1193/1.2166034
  45. Verderame, G.M., Polese, M., Mariniello, C. and Manfredi, G. (2010), "A simulated design procedure for the assessment of seismic capacity of existing reinforced concrete buildings", Adv. Eng. Softw., 41(2), 323-335. https://doi.org/10.1016/j.advengsoft.2009.06.011
  46. Vielma, J.C., Alex, B. and Sergio, O. (2011), "Seismic safety of RC framed buildings designed according to modern codes", J. Civil. Eng. Architect., 5(7), 567-575.
  47. XTRACT V.3.0.7 (2006), Imbsen Software Systems, Sacramento.
  48. Yakut, A. (2008), "Capacity related properties of RC frame buildings in Turkey", J. Earthq. Eng., 12(S2), 265-272. https://doi.org/10.1080/13632460802014295
  49. Zahid, M.Z.A.M., Roberta, D. and Shahrina, F. (2013), "An evaluation of overstrength factor of seismic designed low rise RC buildings", Proc. Eng., 53, 48-51. https://doi.org/10.1016/j.proeng.2013.02.008
  50. Zhou, J., He, F., Liu, T. (2014), "Curvature ductility of columns and structural displacement ductility in RC frame structures subjected to ground motions", Soil. Dyn. Earthq. Eng., 63, 174-183. https://doi.org/10.1016/j.soildyn.2014.03.009

피인용 문헌

  1. Evaluation of Structural Properties of Existing Turkish RC Building Stock vol.43, pp.3, 2015, https://doi.org/10.1007/s40996-018-0207-z
  2. Experimental investigation on IN‐PLANE lateral stiffness and degree of ductility of composite PVC reinforced concrete walls vol.22, pp.4, 2015, https://doi.org/10.1002/suco.202000710