Computers and Concrete

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Local bond stress-slip behavior of reinforcing bars embedded in lightweight aggregate concrete

  • Tang, Chao-Wei (Department of Civil Engineering & Geomatics, Cheng Shiu University)
  • Received : 2015.03.25
  • Accepted : 2015.08.18
  • Published : 2015.09.25
⟨ Previous Next ⟩

Abstract

This paper aims to study the local bond stress-slip behavior of reinforcing bars embedded in lightweight aggregate concrete (LWAC). The experimental variables of the local bond stress-slip tests include concrete strength (20, 40 and 60 MPa), deformed steel bar size (#4, #6 and #8) and coarse aggregate (normal weight aggregate, reservoir sludge lightweight aggregate and waterworks sludge lightweight aggregate). The test results show that the ultimate bond strength increased with the increase of concrete compressive strength. Moreover, the larger the rib height to the diameter ratio ($h/d_b$) of the deformed steel bars is, the greater the ultimate bond stress is. In addition, the suggestion value of the CEB-FIP Model Code to the LWAC specimen's ultimate bond stress is more conservative than that of the normal weight concrete.

Keywords

References

  1. ACI Committee 408 (2003), Bond and Development of Straight Reinforcing Bars in Tension (ACI 408R-03), American Concrete Intitute, Farmington Hills, Mich.
  2. ACI Committee 318 (2011), Building Code Requirements for Structural Concrete (ACI 318-11) and Commentary, American Concrete Intitute, Farmington Hills, Mich.
  3. Alexandre Bogas, J., Gomes, M.G. and Real, S. (2014), "Bonding of steel reinforcement in structural expanded clay lightweight aggregate concrete: The influence of failure mechanism and concrete composition", Constr. Build. Mater., 65, 350-359. https://doi.org/10.1016/j.conbuildmat.2014.04.122
  4. Aslani, F., Nejadi, S. and Samali, B. (2014), "Short term bond shear stress and cracking control of reinforced self-compacting concrete one way slabs under flexural loading", Comput. Concrete, 13(6), 709-737. https://doi.org/10.12989/cac.2014.13.6.709
  5. Basche, H.D., Rhee, I., Willam, K.J. and Shing, P.B. (2007), "Analysis of shear capacity of lightweight concrete beams", Eng. Fract. Mech., 74(1-2), 179-193. https://doi.org/10.1016/j.engfracmech.2006.01.012
  6. CEB (1992), CEB-FIP Model Code 90, Thomas Telford, London, UK.
  7. CEB (2010), CEB-FIP Model Code 2010, Lausanne, Switzerland.
  8. Chen, H.J., Tsai, W.P., Tang, C.W. and Liu, T.H. (2011), "Time-dependent properties of lightweight concrete using sedimentary lightweight aggregate and its application in prestressed concrete beams", Struct. Eng. Mech., 39(6),833-847. https://doi.org/10.12989/sem.2011.39.6.833
  9. Chen, H.J., Liu, T.H., Tang, C.W. and Tsai, W.P. (2011), "Influence of high-cycle fatigue on the tension stiffening behavior of flexural reinforced lightweight aggregate concrete beams", Struct. Eng. Mech., 40(6),847-866. https://doi.org/10.12989/sem.2011.40.6.847
  10. Dehestani, M. and Mousavi, S.S. (2015), "Modified steel bar model incorporating bond-slip effects for embedded element method", Constr. Build. Mater., 81, 284-290. https://doi.org/10.1016/j.conbuildmat.2015.02.027
  11. Deng, Z.C., Jumbe, R.D. and Yuan, C.X. (2014), "Bonding between high strength rebar and reactive powder concrete", Comput. Concrete, 13(3), 411-421. https://doi.org/10.12989/cac.2014.13.3.411
  12. Desnerck, P., De Schutter, G. and Taerwe, L. (2010), "Bond behaviour of reinforcing bars in self-compacting concrete: experimental determination by using beam tests", Mater. Struct., 43(1), 53-62. https://doi.org/10.1617/s11527-010-9596-6
  13. Golafshani, E.M., Alireza Rahai, A. and Kebria, S.S.H. (2014), "Prediction of the bond strength of ribbed steel bars in concrete based on genetic programming", Comput. Concrete, 14(3), 327-359. https://doi.org/10.12989/cac.2014.14.3.327
  14. Guneyisi, E., Gesoglu, M. and Ipek, S. (2013), "Effect of steel fiber addition and aspect ratio on bond strength of cold-bonded fly ash lightweight aggregate concretes", Constr. Build Mater., 47, 358-365. https://doi.org/10.1016/j.conbuildmat.2013.05.059
  15. Hassan, A.A.A., Hossain, K.M.A and Lachemi, M. (2010), "Bond strength of deformed bars in large reinforced concrete members cast with industrial self-consolidating concrete mixture", Constr. Build. Mater., 24(4), 520-530. https://doi.org/10.1016/j.conbuildmat.2009.10.007
  16. Hossain, K.M.A. and Lachemi, M. (2008), "Bond behavior of selfconsolidating concrete with mineral and chemical admixtures", J. Mater. Civil Eng., ASCE, 20(9), 608-616. https://doi.org/10.1061/(ASCE)0899-1561(2008)20:9(608)
  17. Husem, M. (2003), "The effects of bond strengths between lightweight and ordinary aggregate-mortar, aggregate-cement paste on the mechanical properties of concrete", Mater. Sci. Eng. A, 363, 152-158. https://doi.org/10.1016/S0921-5093(03)00595-1
  18. Mo, K.H., Alengaram, U.J., Visintin, P., Goh, S.H. and Jumaat, M.Z. (2015), "Influence of lightweight aggregate on the bond properties of concrete with various strength grades", Constr. Build Mater., 84, 377-386. https://doi.org/10.1016/j.conbuildmat.2015.03.040
  19. Morohashi, N. and Sakurada, T. (2002), "Effect of concrete strength on bond splitting strength of lap splice", JCI Ann. J., 24(2), 787-92.
  20. Ogura, N. and Ichinose, T. (2004), "Analytical study on splitting bond failure of deformed bars", AIJ J. Struct. Constr. Eng., 586, 147-153.
  21. Ogura, N., Bolander, J.E. and Ichinose, T. (2008), "Analysis of bond splitting failure of deformed bars within structural concrete", Eng. Struct., 30(2), 428-435. https://doi.org/10.1016/j.engstruct.2007.04.004
  22. Soroushian, P., Mirza, F. and Alhozaimy, A. (1994), "Bonding of confined steel fiber reinforced concrete to deformed bars", ACI Mater. J., 91(2), 144-149.
  23. Tang, C.W., Yen, T. and Chen, H.J. (2009), "Shear behavior of reinforced concrete beams made with sedimentary lightweight aggregate without shear reinforcement", J. Mater. Civil Eng., ASCE, 21(12), 730-739. https://doi.org/10.1061/(ASCE)0899-1561(2009)21:12(730)
  24. Valcuende, M. and Parra, C. (2009), "Bond behaviour of reinforcement in self-compacting concretes", Constr. Build. Mater., 23(1), 162-170. https://doi.org/10.1016/j.conbuildmat.2008.01.007
  25. Zhou, H., Lu, J., Xv, X., Dong, B. and Xing, F. (2015), "Effects of stirrup corrosion on bond-slip performance of reinforcing steel in concrete: An experimental study", Constr. Build Mater., 93, 257-266. https://doi.org/10.1016/j.conbuildmat.2015.05.122
  26. Zhu, W., Sonebi, M. and Bartos, P.J.M. (2004), "Bond and interfacial properties of reinforcement in self-compacting concrete", Mater. Struct., 37, 442-448. https://doi.org/10.1007/BF02481580

Cited by

  1. Bond properties of lightweight concrete – A review vol.112, 2016, https://doi.org/10.1016/j.conbuildmat.2016.02.125
  2. Post-cracking behavior of UHPC on the concrete members reinforced by steel rebar vol.18, pp.1, 2016, https://doi.org/10.12989/cac.2016.18.1.139
  3. Effect of presoaking degree of lightweight aggregate on the properties of lightweight aggregate concrete vol.19, pp.1, 2015, https://doi.org/10.12989/cac.2017.19.1.069
  4. Uniaxial bond stress-slip behavior of reinforcing bars embedded in lightweight aggregate concrete vol.62, pp.5, 2015, https://doi.org/10.12989/sem.2017.62.5.651
  5. Bond behavior between high volume fly ash concrete and steel rebars vol.19, pp.6, 2015, https://doi.org/10.12989/cac.2017.19.6.625
  6. Pull-out behaviour of recycled aggregate based self compacting concrete vol.21, pp.3, 2015, https://doi.org/10.12989/cac.2018.21.3.249
  7. Local bond-slip behavior of medium and high strength fiber reinforced concrete after exposure to high temperatures vol.66, pp.4, 2015, https://doi.org/10.12989/sem.2018.66.4.477
  8. Numerical simulations of progression of damage in concrete embedded chemical anchors vol.22, pp.4, 2015, https://doi.org/10.12989/cac.2018.22.4.395
  9. Structural lightweight concrete containing expanded poly-styrene beads; Engineering properties vol.34, pp.4, 2020, https://doi.org/10.12989/scs.2020.34.4.581
  10. Local bond-slip behavior of fiber reinforced LWAC after exposure to elevated temperatures vol.73, pp.4, 2020, https://doi.org/10.12989/sem.2020.73.4.437
  11. Development of non-destructive testing method to evaluate the bond quality of reinforced concrete beam vol.74, pp.3, 2015, https://doi.org/10.12989/sem.2020.74.3.313
  12. Bond properties of steel and sand-coated GFRP bars in Alkali activated cement concrete vol.75, pp.1, 2020, https://doi.org/10.12989/sem.2020.75.1.123
  13. Lap splices in confined self-compacting lightweight concrete vol.263, pp.None, 2020, https://doi.org/10.1016/j.conbuildmat.2020.120619
  14. Infra lightweight concrete: A decade of investigation (a review) vol.22, pp.suppl1, 2015, https://doi.org/10.1002/suco.202000206
  15. Bond Behavior of Deformed Bars in Self-Compacting Lightweight Aggregate Concrete at Early Ages vol.33, pp.2, 2015, https://doi.org/10.1061/(asce)mt.1943-5533.0003573
  16. Bond stress-slip model for rebar-concrete interface under monotonic and cyclic loading vol.34, pp.None, 2015, https://doi.org/10.1016/j.istruc.2021.07.093