DOI QR코드

DOI QR Code

Monitoring corrosion of reinforced concrete beams in a chloride containing environment under different loading levels

  • Wei, Aifang (School of Engineering, Deakin University) ;
  • Wang, Ying (School of Engineering, Deakin University) ;
  • Tan, Mike Y.J. (School of Engineering, Deakin University)
  • 투고 : 2015.03.09
  • 심사 : 2015.08.23
  • 발행 : 2015.09.25

초록

Corrosion has significant adverse effects on the durability of reinforced concrete (RC) structures, especially those exposed to a marine environment and subjected to mechanical stress, such as bridges, jetties, piers and wharfs. Previous studies have been carried out to investigate the corrosion behaviour of steel rebar in various concrete structures, however, few studies have focused on the corrosion monitoring of RC structures that are subjected to both mechanical stress and environmental effects. This paper presents an exploratory study on the development of corrosion monitoring and detection techniques for RC structures under the combined effects of external loadings and corrosive media. Four RC beams were tested in 3% NaCl solutions under different levels of point loads. Corrosion processes occurring on steel bars under different loads and under alternative wetting - drying cycle conditions were monitored. Electrochemical and microscopic methods were utilised to measure corrosion potentials of steel bars; to monitor galvanic currents flowing between different steel bars in each beam; and to observe corrosion patterns, respectively. The results indicated that steel corrosion in RC beams was affected by local stress. The point load caused the increase of galvanic currents, corrosion rates and corrosion areas. Pitting corrosion was found to be the main form of corrosion on the surface of the steel bars for most of the beams, probably due to the local concentration of chloride ions. In addition, visual observation of the samples confirmed that the localities of corrosion were related to the locations of steel bars in beams. It was also demonstrated that electrochemical devices are useful for the detection of RC beam corrosion.

키워드

참고문헌

  1. Ahmad, S. (2003), "Reinforcement corrosion in concrete structures, its monitoring and service life prediction--a review", Cement Concrete Comp., 25(4), 459-471. https://doi.org/10.1016/S0958-9465(02)00086-0
  2. Alghamdi, S.A. and Ahmad, S. (2014), "Service life prediction of RC structures based on correlation between electrochemical and gravimetric reinforcement corrosion rates", Cement Concrete Comp., 47, 64-68. https://doi.org/10.1016/j.cemconcomp.2013.06.003
  3. Al Zubaidy, E.A.H. and Al Tamimi, A. (2012), "Reduction of corrosion process in steel bars using inhibitors", Int. J. Electrochem. Sci., 7, 6472-6488.
  4. Apostolopoulos, C.A. and Papadakis, V.G. (2008), "Consequences of steel corrosion on the ductility properties of reinforcement bar", Constr. Build. Mater., 22(12), 2316-2324. https://doi.org/10.1016/j.conbuildmat.2007.10.006
  5. Assouli, B., Ballivy, G. and Rivard, P. (2008), "Influence of environmental parameters on application of standard ASTM C876-91: half cell potential measurements", Corrosion Eng. Sci. Technol., 43(1), 93-96. https://doi.org/10.1179/174327807X214572
  6. Ballim, Y. and Reid, J.C. (2003), "Reinforcement corrosion and deflection of RC beams - an experimental critique of current test methods", Cement Concrete Comp., 25(6), 25-32.
  7. Berkeley, K.G.C. and Pathmanaban, S. (1990), Cathodic protection of reinforcement steel in concrete, Butterworths & Co. Ltd., London, UK.
  8. Cabrera, J.G. (1996), "Deterioration of concrete due to reinforcement steel corrosion", Cement Concrete Comp., 18(1), 47-59. https://doi.org/10.1016/0958-9465(95)00043-7
  9. Dehwah, H.A.F., Maslehuddin, M. and Austin, S.A. (2002), "Long-term effect of sulfate ions and associated cation type on chloride-induced reinforcement corrosion in Portland cement concretes", Cement Concrete Comp., 24(1), 17-25. https://doi.org/10.1016/S0958-9465(01)00023-3
  10. Diaz, B., Freire, L., Novoa, X.R. and Perez, M.C. (2009), "Electrochemical behaviour of high strength steel wires in the presence of chlorides", Electrochimica Acta, 54(22), 5190-5198. https://doi.org/10.1016/j.electacta.2009.01.017
  11. Fang, C, Lundgren, K., Plos, M. and Gylltoft, K. (2006), "Bond behaviour of corroded reinforcing steel bars in concrete", Cement Concrete Res., 36, 1931-1938. https://doi.org/10.1016/j.cemconres.2006.05.008
  12. Li, G., Yuan, Y.S. and Li, F.M. (2005), "Accelerating effect of wetting-drying cycles on steel bar corrosion in concrete", J. China Univ. Mining Technol., 15(3), 197-202.
  13. Lomborg, B. (2001), The skeptical environmentalist: measuring the real state of the world, Cambridge University Press, Cambridge.
  14. Nwaubani, S.O. and Katsanos, A. (2014), "Effect of alternative de-icers on the corrosion resistance of reinforced concrete bridges and highway structures", Intechopen, 24, 594-614
  15. Ormellese, M., Berra, M., Bolzoni, F. and Pastore, T. (2006), "Corrosion inhibitors for chlorides induced corrosion in reinforced concrete structures", Cement Concrete Res., 36(3), 536-547. https://doi.org/10.1016/j.cemconres.2005.11.007
  16. Pettersson, K. (1998), "Service life of concrete structure including the propagation time", Concrete under severe conditions 2: environment and loading: Proceedings of the 2nd international conference on concrete under severe conditions, Troms, Norway.
  17. Poerner, N.W. (2007), An investigation of variability among residual stress measurement techniques and prediction of machining induced distortion, Texas Tech University.
  18. Poupard, O., L'hostis, V., Catinaud, S. and Petre-Lazar, I. (2006), "Corrosion damage diagnosis of a reinforced concrete beam after 40 years natural exposure in marine environment", Cement Concrete Res., 36(3), 504-520. https://doi.org/10.1016/j.cemconres.2005.11.004
  19. Pradhan, B. and Bhattacharjee, B. (2009), "Half-cell potential as an indicator of chloride-induced rebar corrosion initiation in RC", J. Mater. Civil Eng., 21(10), 543-552. https://doi.org/10.1061/(ASCE)0899-1561(2009)21:10(543)
  20. Sakr, K. (2005), "Effect of cement type on the corrosion of reinforcing steel bars exposed to acidic media using electrochemical techniques", Cement Concrete Res., 35(9), 1820-1826. https://doi.org/10.1016/j.cemconres.2004.10.015
  21. Schmitt, G. (2009), "Global needs for knowledge dissemination, research, and development in materials deterioration and corrosion control", World Corrosion Organization, New York.
  22. Song, H.W., Ann, K.Y., Pack, S.W. and Lee, C.H. (2010), "Factors influencing chloride transport and chloride threshold level for the prediction of service life of concrete structures", Int. J. Struct. Eng., 1(1), 131-144. https://doi.org/10.1504/IJSTRUCTE.2010.031481
  23. Tan, Y.J. (2011), "Experimental methods designed for measuring corrosion in highly resistive and inhomogeneous media", Corrosion Sci., 53, 1145-1155 https://doi.org/10.1016/j.corsci.2011.01.018
  24. Torres-Acosta, A.A., Sergio, N.G. and Jorge, T.G. (2007), "Residual flexure capacity of corroded reinforced concrete beams", Eng. Struct., 29(6), 1145-1152. https://doi.org/10.1016/j.engstruct.2006.07.018
  25. Wang, H.L., Lu, C.H., Jin, W.L. and Bai, Y. (2011), "Effect of external loads on chloride transport in concrete", J. Mater. Civil Eng., 23(7), 1043-1049. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000265
  26. Wang, Y. and Hao, H. (2012), "Damage identification of steel beams using local and global methods", Adv. Struct. Eng., 15(5), 807-824. https://doi.org/10.1260/1369-4332.15.5.807
  27. Wang, Y., Zhu, X.Q., Hao, H. and Stewart, M.G. (2008), "Corrosion-induced cracking of reinforced concrete beam: experimental study", WCEAM-IMS 2008: Engineering asset management-a foundation for sustainable development: Proceedings of the Third World Congress on Engineering Asset Management and Intelligent Maintenance Systems. Springer-Verlag London.
  28. Yuan, Y., Ji, Y., and Shah, S.P. (2007), "Comparison of two accelerated corrosion techniques for concrete structures", ACI Struct. J., 104(3), 344-347.

피인용 문헌

  1. Experimental Study on the Structural Performance Degradation of Corrosion-Damaged Reinforced Concrete Beams vol.2019, pp.None, 2015, https://doi.org/10.1155/2019/9562574
  2. Condition assessment of bridge pier using constrained minimum variance unbiased estimator vol.7, pp.4, 2015, https://doi.org/10.12989/smm.2020.7.4.319