DOI QR코드

DOI QR Code

An experimental study for decentralized damage detection of beam structures using wireless sensor networks

  • Jayawardhana, Madhuka (School of Computing, Engineering & Mathematics, University of Western Sydney) ;
  • Zhu, Xinqun (School of Computing, Engineering & Mathematics, University of Western Sydney) ;
  • Liyanapathirana, Ranjith (School of Computing, Engineering & Mathematics, University of Western Sydney) ;
  • Gunawardana, Upul (School of Computing, Engineering & Mathematics, University of Western Sydney)
  • 투고 : 2015.03.08
  • 심사 : 2015.08.29
  • 발행 : 2015.09.25

초록

This paper addresses the issue of reliability and performance in wireless sensor networks (WSN) based structural health monitoring (SHM), particularly with decentralized damage identification techniques. Two decentralized damage identification algorithms, namely, the autoregressive (AR) model based damage index and the Wiener filter method are developed for structural damage detection. The ambient and impact testing have been carried out on the steel beam structure in the laboratory. Seven wireless sensors are installed evenly along the steel beam and seven wired sensor are also installed on the beam to monitor the dynamic responses as comparison. The results showed that wireless measurements performed very much similar to wired measurements in detecting and localizing damages in the steel beam. Therefore, apart from the usual advantages of cost effectiveness, manageability, modularity etc., wireless sensors can be considered a possible substitute for wired sensors in SHM systems.

키워드

과제정보

연구 과제 주관 기관 : University of Western Sydney

참고문헌

  1. Anastasi, G., Conti, M., Di Francesco, M. and Passarella A. (2009), "Energy conservation in wireless sensor networks: A survey", Ad Hoc Networks, 7(3), 537-568. https://doi.org/10.1016/j.adhoc.2008.06.003
  2. Aygun, B. and Gungor, V.C. (2011), "Wireless sensor networks for structural health monitoring: recent advances and future research directions", Sensor Rev., 31(3), 261-276. https://doi.org/10.1108/02602281111140038
  3. Box, G.E., Jenkins, G.M. and Reinsel, G.C. (2013), Time Series Analysis: Forecasting and Control, Wiley. com.
  4. Gao, Y., Spencer, B.F. and Ruiz-Sandoval, M. (2006), "Distributed computing strategy for structural health monitoring", Struct. Control Health Monit., 13(1), 488-507. https://doi.org/10.1002/stc.117
  5. Hackmann, G., Guo, W., Yan, G., Sun, Z., Lu, C. and Dyke, S. (2014), "Cyber-physical co-design of distributed structural health monitoring with wireless sensor networks", IEEE T. Parall. Distr., 25(1), 63-72. https://doi.org/10.1109/TPDS.2013.30
  6. Hackmann, G., Sun, F., Castaneda, N., Lu, C. and Dyke, S. (2012), "A holistic approach to decentralized structural damage localization using wireless sensor networks", Comput. Commun., 36(1), 29-41. https://doi.org/10.1016/j.comcom.2012.01.010
  7. Jayawardhana, M., Zhu, X.Q. and Liyanapathirana, R. (2011), "Structural damage detection of RC structures using AR model coefficients", Proceedings of the 14th Asia Pacific Vibration Conference, December 2011, Hong Kong.
  8. Jayawardhana, M., Zhu, X.Q. and Liyanapathirana, R. (2013), "Decentralized damage detection of RC structures using the Wiener filter", Australian J. Struct. Eng., 14(1), 57-69.
  9. Jindal, A. and Liu, M. (2012), "Networked computing in wireless sensor networks for structural health monitoring", IEEE/ACM T. Networking, 20(4), 1203-1216. https://doi.org/10.1109/TNET.2011.2175450
  10. Kim, J. and Lynch, J. (2012), "Autonomous decentralized system identification by Markov parameter estimation using distributed smart wireless sensor networks", J. Eng. Mech. - ASCE, 138(5), 478-490. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000359
  11. Ling, Q., Tian, Z., Yin, Y. and Li, Y. (2009), "Localized structural health monitoring using energy-efficient wireless sensor networks", IEEE Sens. J., 9(11), 1596-1604. https://doi.org/10.1109/JSEN.2009.2019318
  12. Liu, X., Cao, J., Xu, Y., Wu, H. and Liu Y. (2009), "A multi-scale strategy in wireless sensor networks for structural health monitoring", Proceedings of the 5th International Conference on Intelligent Sensors, Sensor Networks and Information Processing (ISSNIP).
  13. Lynch, J.P. and Loh, K.J. (2006), "A summary review of wireless sensors and sensor networks for structural health monitoring", Shock Vib. Digest, 38(2), 91-130. https://doi.org/10.1177/0583102406061499
  14. Lynch, J.P. (2007), "An overview of wireless structural health monitoring for civil structures", Philos. T. R. Soc. A, 365(1851), 345-372. https://doi.org/10.1098/rsta.2006.1932
  15. Meo, M. and Zumpano, G. (2005), "On the optimal sensor placement techniques for a bridge structure", Eng. Struct., 27(10), 1488-1497. https://doi.org/10.1016/j.engstruct.2005.03.015
  16. Pakzad, S., Fenves, G., Kim, S. and Culler, D. (2008), "Design and implementation of scalable wireless sensor network for structural monitoring", J. Infrastruct. Syst. - ASCE, 14(1), 89-101. https://doi.org/10.1061/(ASCE)1076-0342(2008)14:1(89)
  17. Pottie, G.J. and Kaiser, W.J. (2000), "Wireless integrated network sensors", Communications of the ACM, 43(5), 51-58. https://doi.org/10.1145/332833.332838
  18. Spencer, B.F., Jo, H., Mechitov, K.A., Li, J., Sim, S.H., Kim, R.E., Cho, S., Linderman, L.E., Moinzadeh, P., Giles, R.K. and Agha, G. (2015), "Recent advances in wireless smart sensors for multi-scale monitoring and control of civil infrastructure", J. Civil Struct. Health Monit., DOI 10.1007/s13349-015-0111-1.
  19. Zhou, G.D. and Yi, T.H. (2013), "Recent developments on wireless sensor networks technology for bridge health monitoring", Mathematical Problems in Engineering, Article ID 947867, http://dx.doi.org/10.1155/2013/947867.
  20. Zhou, G.D., Yi, T.H., Zhang, H. and Li, H.N. (2014), "Energy-aware wireless sensor placement in structural health monitoring using hybrid discrete firefly algorithm", Struct. Control Health Monit., DOI: 10.1002/stc.1707.
  21. Zimmerman, A.T., Shiraishi, M., Swartz, R.A. and Lynch, J.P. (2008), "Automated modal parameter estimation by parallel processing within wireless monitoring systems", J. Infrastruct. Syst. - ASCE, 14(1), 102-113. https://doi.org/10.1061/(ASCE)1076-0342(2008)14:1(102)

피인용 문헌

  1. Measurement System With Accelerometer Integrated RFID Tag for Infrastructure Health Monitoring vol.65, pp.5, 2016, https://doi.org/10.1109/TIM.2015.2507406