Steel and Composite Structures

  • 제19권3호
  • /
  • Pages.759-776
  • /
  • 2015
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Dynamic behavior of piezoelectric bimorph beams with a delamination zone

  • Zemirline, Adel (Laboratory of Research: "Structures" In the University of Saad Dahleb) ;
  • Ouali, Mohammed (Laboratory of Research: "Structures" In the University of Saad Dahleb) ;
  • Mahieddine, Ali (Energy and smart systems Laboratory, Khemis Miliana University)
  • 투고 : 2014.12.16
  • 심사 : 2015.04.02
  • 발행 : 2015.09.25
⟨ 이전 논문 다음 논문 ⟩

초록

The First Order Shear Deformation Theory (FOSDT) is considered to study the dynamic behavior of a bimorph beam. A delamination zone between the upper and the lower layer has been taken into consideration; the beam is discretised using the finite elements method (FEM). Several parameters are taken into consideration like structural damping, the geometry, the load nature and the configurations of the boundary conditions. Results show that the delamination between the upper and the lower layer affects considerably the actuation.

키워드

참고문헌

  1. Arafa, M., Aldraihem, O. and Baz, A. (2009), "Modeling and characterization of a linear piezomotor", J. Intell. Mater. Syst. Struct., 20(16), 1-9. DOI: 10.1177/1045389X09343022
  2. Donoso, A. and Sigmund, O. (2009), "Optimization of piezoelectric bimorph actuators with active damping for static and dynamic loads", Struct. Multidisc. Optim., 38(2), 171-183. https://doi.org/10.1007/s00158-008-0273-0
  3. Hai, A., Weiguang, A., Duohe, Y. and Binsheng, W. (2009), "Static force reliability analysis of truss structure with piezoelectric patches affixed to its surface", Chinese J. Aeronaut., 22(1), 22-31. https://doi.org/10.1016/S1000-9361(08)60065-5
  4. Li, Y.S., Feng, W.J. and Cai, Z.Y. (2014), "Bending and free vibration of functionally graded piezoelectric beam based on modified strain gradient theory", Compos. Struct., 115, 41-50. https://doi.org/10.1016/j.compstruct.2014.04.005
  5. Lui, X., Chen, R. and Zhu, L. (2012), "Energy conversion efficiency of rainbow shape piezoelectric transducer", Chinese J. Aeronaut., 25(5), 691-697. https://doi.org/10.1016/S1000-9361(11)60435-4
  6. Mahieddine, A. (2011), "Effets de la piezoelectricite et de l'amortissement structural dans le cas des poutres, des coques et des plaques. Controle actif", Ph.D. Dissertation; Saad Dahleb University of Blida, Algeria.
  7. Mahieddine, A., Pouget, J. and Ouali, M. (2010), "Modeling and analysis of delaminated beams with integrated piezoelectric actuators", Comptes Rendus Mecanique, 338(5), 283-289. https://doi.org/10.1016/j.crme.2010.03.003
  8. Nikkhoo, A. (2014), "Investigating the behavior of smart thin beams with piezoelectric actuators under dynamic loads", Mech. Syst. Signal Process., 45(2), 513-530. https://doi.org/10.1016/j.ymssp.2013.11.003
  9. Perel, V.Y. and Palazotto, A.N. (2002), "Finite element formulation for dynamics of delaminated composite beams with piezoelectric actuators", Int. J. Solid. Struct., 39(17), 4457-4483. https://doi.org/10.1016/S0020-7683(02)00348-7
  10. Poizat, C. and Benjeddou, A. (2006), "On analytical and finite element modelling of piezoelectric extension and shear bimorphs", Comput. Struct., 84(22-23), 1426-1437. https://doi.org/10.1016/j.compstruc.2005.01.005
  11. Smits, J.G., Dlake, I. and Cooney, T.K. (1991), "The constituent equations of piezoelectric bimorphs", Sens. Actuat. A, 28(1), 41-61. https://doi.org/10.1016/0924-4247(91)80007-C
  12. Zemirline, A., Ouali, M. and Mahieddine, A. (2013), "Actuation using piezoelectric bimorph beams under the effects of structural damping", Proceeding of the Contech Conference, Istanbul, Turkey, December.
  13. Zheng, X.J., Zhou, Y.C. and Nin, M.Z. (2002), "Thermopiezoelectric response of a piezoelectric thin film PZT-6B deposited on MgO(1 0 0) substrate due to a continuous laser", Int. J. Solid. Struct., 39(15), 3935-3957. https://doi.org/10.1016/S0020-7683(02)00268-8
  14. Zhou, Y-G., Chen, Y-M. and Ding, H-J. (2007), "Analytical modeling of sandwich beam for piezoelectric bender elements", Appl. Math. Mech., 28(2), 1581-1586. https://doi.org/10.1007/s10483-007-1204-z

피인용 문헌

  1. Analytical determination of shear correction factor for Timoshenko beam model vol.29, pp.4, 2015, https://doi.org/10.12989/scs.2018.29.4.483
  2. Effectiveness of piezoelectric fiber reinforced composite laminate in active damping for smart structures vol.31, pp.4, 2015, https://doi.org/10.12989/scs.2019.31.4.387
  3. Aeroelastic behavior of nano-composite beam-plates with double delaminations vol.33, pp.5, 2015, https://doi.org/10.12989/scs.2019.33.5.653
  4. Analysis of the machinability of GFRE composites in drilling processes vol.36, pp.4, 2015, https://doi.org/10.12989/scs.2020.36.4.417
  5. Design and Optimization of a Linear Piezoelectric Motor using Response Surface Method vol.56, pp.5, 2015, https://doi.org/10.3103/s0025654421050204