Steel and Composite Structures

  • 제19권3호
  • /
  • Pages.679-695
  • /
  • 2015
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Numerical analysis of FGM plates with variable thickness subjected to thermal buckling

  • Bouguenina, Otbi (Department of Civil Engineering and Hydraulics, University of Saida) ;
  • Belakhdar, Khalil (Department of Science and Technology, University Centre of Tamanrasset) ;
  • Tounsi, Abdelouahed (Laboratory of Materials and Hydrology, University of Sidi Bel Abbes) ;
  • Adda Bedia, El Abbes (Laboratory of Materials and Hydrology, University of Sidi Bel Abbes)
  • 투고 : 2014.12.12
  • 심사 : 2015.02.09
  • 발행 : 2015.09.25
⟨ 이전 논문 다음 논문 ⟩

초록

A numerical solution using finite difference method to evaluate the thermal buckling of simply supported FGM plate with variable thickness is presented in this research. First, the governing differential equation of thermal stability under uniform temperature through the plate thickness is derived. Then, the governing equation has been solved using finite difference method. After validating the presented numerical method with the analytical solution, the finite difference formulation has been extended in order to include variable thickness. The accuracy of the finite difference method for variable thickness plate has been also compared with the literature where a good agreement has been found. Furthermore, a parametric study has been conducted to analyze the effect of material and geometric parameters on the thermal buckling resistance of the FGM plates. It was found that the thickness variation affects isotropic plates a bit more than FGM plates.

키워드

참고문헌

  1. Ait Atmane, H., Tounsi, A., Ziane, N. and Mechab, I. (2011), "Mathematical solution for free vibration of sigmoid functionally graded beams with varying cross-section", Steel Compos. Struct., Int. J., 11(6), 489-504. https://doi.org/10.12989/scs.2011.11.6.489
  2. Bouazza, M., Tounsi, A., Bedia Adda, E.A. and Megueni, A. (2009), "Buckling analysis of functionally graded plates with simply supported edges", Leonardo J. Sci., 8(15), 21-32.
  3. Fekrar, A., Zidi, M., Boumia, L., Ait Atmane, H., Tounsi, A. and Bedia Adda, E.A. (2013), "Thermal buckling of AL/AL2O3 functionally graded plates based on first order theory", Nature Technol. J. AFundamental & Eng. Sci., A(08), 12-16.
  4. Ghomshei, M.M. and Abbasi, V. (2013), "Thermal buckling analysis of annular FGM plate having variable thickness under thermal load of arbitrary distribution by finite element method", J. Mech. Sci. Tech., 27(4), 1031-1039. https://doi.org/10.1007/s12206-013-0211-y
  5. Hiroyuki, M. (2009), "Stress analysis of functionally graded plates subjected to thermal and mechanical loadings", Compos. Struct., 87(4), 344-357. https://doi.org/10.1016/j.compstruct.2008.02.002
  6. Javaheri, R. and Eslami, M.R. (2002a), "Buckling of functionally graded plates under in-plane compressive loading", ZAMM Z Angew. Mater. Mech., 82(4), 277-283. https://doi.org/10.1002/1521-4001(200204)82:4<277::AID-ZAMM277>3.0.CO;2-Y
  7. Javaheri, R. and Eslami, M.R. (2002b), "Thermal buckling of functionally graded plates", AIAA. J., 40(1), 162-169 https://doi.org/10.2514/2.1626
  8. Javaheri, R. and Eslami, M.R. (2002c), "Thermal buckling of functionally graded plates based on higher order theory", J. Therm. Stress., 25(1), 603-625. https://doi.org/10.1080/01495730290074333
  9. Koohkan, H., Kimiaeifar, A., Mansourabadi, A. and Vaghefi, R. (2010), "An analytical approach on the buckling analysis of circular, solid and annular functionally graded thin plates", J. Mech. Eng., 41(1), 7-14.
  10. Lanhe, W. (2004), "Thermal buckling of a simply supported moderately thick rectangular FGM plate", Compos. Struct., 64(2), 211-218. https://doi.org/10.1016/j.compstruct.2003.08.004
  11. Mohammadi, M., Saidi, A.R. and Jomehzadeh, E. (2010), "Levy solution for buckling analysis of functionally graded rectangular plates", Appl. Compos. Mater., 17(1), 81-93. https://doi.org/10.1007/s10443-009-9100-z
  12. Mozafari, H. and Ayob, A. (2012), "Effect of thickness variation on the mechanical buckling load in plates made of functionally graded materials", Procedia Technology, 1(2012), 496-504. https://doi.org/10.1016/j.protcy.2012.02.108
  13. Mozafari, H., Ayob, A. and Alias, A. (2010a), "Influence of thickness variation on the buckling load in plates made of functionally graded materials", Eur. J. Sci. Res., 47(3), 422-435.
  14. Mozafari, H., Ayob, A. and Alias, A. (2010b), "Verification of the thermal buckling load in plates made of functionally graded materials", Int. J. Eng., 4(5), 338-356.
  15. Mozafari, H., Abdi, B. and Ayob, A. (2012a-b), "Optimization of temperature-dependent functionally graded material based on colonial competitive algorithm", Appl. Mech. Mater., 121-126, 4575-4580.
  16. Mozafari, H., Abdi, B., Ayob, A. and Alias, A. (2012b-c), "Optimum critical buckling of functionally graded plates under non-linear temperature by using imperialist competitive algorithm", Appl. Mech. Mater., 110-116, 3429-3433.
  17. Noseir, A. and Reddy, J.N. (1992), "On vibration and buckling of symmetric laminated plates according to shear deformation theories", Acta. Mech., 94(3-4), 145-169. https://doi.org/10.1007/BF01176648
  18. Pouladvand, M. (2009), "Thermal stability of thin rectangular plates with variable thickness made of functionally graded material", J Solid Mech., 1(3), 171-189.
  19. Praveen, G.N. and Reddy, J.N. (1998), "Nonlinear transient thermoelastic analysis of functionally graded ceramic-metal plates", Int. J. Solid. Struct., 35(33), 4457-4476. https://doi.org/10.1016/S0020-7683(97)00253-9
  20. Rajasekaran, S. and Wilson, J.A. (2013), "Buckling and vibration of rectangular plates of variable thickness with different end conditions by finite difference technique", Struct. Eng. Mech., Int. J., 46(2), 269-294. https://doi.org/10.12989/sem.2013.46.2.269
  21. Raki, M., Alipour, R. and Kamanbedast, A. (2012), "Thermal buckling of thin rectangular FGM plate", World Appl. Sci. J., 16(1), 52-62.
  22. Rohit, S. and Maiti, P.R. (2012), "Buckling of simply supported FGM plates under uniaxial load", Int. J. Civil Struct. Eng., 2(4), 1035-1050.
  23. Zenkour, A.M. and Mashat, D.S. (2010), "Thermal buckling analysis of ceramic-metal functionally graded plates", Natural Sci., 2(9), 968-978. https://doi.org/10.4236/ns.2010.29118

피인용 문헌

  1. A simple hyperbolic shear deformation theory for vibration analysis of thick functionally graded rectangular plates resting on elastic foundations vol.11, pp.2, 2016, https://doi.org/10.12989/gae.2016.11.2.289
  2. A novel four variable refined plate theory for bending, buckling, and vibration of functionally graded plates vol.22, pp.3, 2016, https://doi.org/10.12989/scs.2016.22.3.473
  3. Thermal post-buckling behavior of imperfect temperature-dependent sandwich FGM plates resting on Pasternak elastic foundation vol.22, pp.1, 2016, https://doi.org/10.12989/scs.2016.22.1.091
  4. An efficient shear deformation theory for wave propagation of functionally graded material plates vol.57, pp.5, 2016, https://doi.org/10.12989/sem.2016.57.5.837
  5. Buckling behaviours of functionally graded polymeric thin-walled hemispherical shells vol.21, pp.4, 2016, https://doi.org/10.12989/scs.2016.21.4.849
  6. Hygro-thermo-mechanical bending of S-FGM plates resting on variable elastic foundations using a four-variable trigonometric plate theory vol.18, pp.4, 2016, https://doi.org/10.12989/sss.2016.18.4.755
  7. Buckling analysis of isotropic and orthotropic plates using a novel four variable refined plate theory vol.21, pp.6, 2016, https://doi.org/10.12989/scs.2016.21.6.1287
  8. Effect of porosity on vibrational characteristics of non-homogeneous plates using hyperbolic shear deformation theory vol.22, pp.4, 2016, https://doi.org/10.12989/was.2016.22.4.429
  9. Thermal stability of functionally graded sandwich plates using a simple shear deformation theory vol.58, pp.3, 2016, https://doi.org/10.12989/sem.2016.58.3.397
  10. Thermo-mechanical postbuckling of symmetric S-FGM plates resting on Pasternak elastic foundations using hyperbolic shear deformation theory vol.57, pp.4, 2016, https://doi.org/10.12989/sem.2016.57.4.617
  11. A new five unknown quasi-3D type HSDT for thermomechanical bending analysis of FGM sandwich plates vol.22, pp.5, 2015, https://doi.org/10.12989/scs.2016.22.5.975
  12. Hygrothermal effects on buckling of composite shell-experimental and FEM results vol.22, pp.6, 2016, https://doi.org/10.12989/scs.2016.22.6.1445
  13. A novel quasi-3D hyperbolic shear deformation theory for functionally graded thick rectangular plates on elastic foundation vol.12, pp.1, 2015, https://doi.org/10.12989/gae.2017.12.1.009
  14. A four variable refined nth-order shear deformation theory for mechanical and thermal buckling analysis of functionally graded plates vol.13, pp.3, 2015, https://doi.org/10.12989/gae.2017.13.3.385
  15. A new and simple HSDT for thermal stability analysis of FG sandwich plates vol.25, pp.2, 2015, https://doi.org/10.12989/scs.2017.25.2.157
  16. Free vibration of functionally graded plates resting on elastic foundations based on quasi-3D hybrid-type higher order shear deformation theory vol.20, pp.4, 2017, https://doi.org/10.12989/sss.2017.20.4.509
  17. An efficient and simple four variable refined plate theory for buckling analysis of functionally graded plates vol.25, pp.3, 2015, https://doi.org/10.12989/scs.2017.25.3.257
  18. Vibration and mode shape analysis of sandwich panel with MWCNTs FG-reinforcement core vol.25, pp.3, 2017, https://doi.org/10.12989/scs.2017.25.3.347
  19. A novel and simple higher order shear deformation theory for stability and vibration of functionally graded sandwich plate vol.25, pp.4, 2017, https://doi.org/10.12989/scs.2017.25.4.389
  20. A new quasi-3D HSDT for buckling and vibration of FG plate vol.64, pp.6, 2015, https://doi.org/10.12989/sem.2017.64.6.737
  21. Effects of CNTs waviness and aspect ratio on vibrational response of FG-sector plate vol.25, pp.6, 2015, https://doi.org/10.12989/scs.2017.25.6.649
  22. Thermal buckling of FGM beams having parabolic thickness variation and temperature dependent materials vol.27, pp.6, 2015, https://doi.org/10.12989/scs.2018.27.6.777
  23. Vibration analysis of sandwich sectorial plates considering FG wavy CNT-reinforced face sheets vol.28, pp.5, 2015, https://doi.org/10.12989/scs.2018.28.5.541
  24. Analysis of wave propagation and free vibration of functionally graded porous material beam with a novel four variable refined theory vol.15, pp.4, 2018, https://doi.org/10.12989/eas.2018.15.4.369
  25. Deflection of axially functionally graded rectangular plates by Green's function method vol.30, pp.1, 2019, https://doi.org/10.12989/scs.2019.30.1.057
  26. Vibration analysis of different material distributions of functionally graded microbeam vol.69, pp.6, 2015, https://doi.org/10.12989/sem.2019.69.6.637
  27. Multiscale modeling approach for thermal buckling analysis of nanocomposite curved structure vol.7, pp.3, 2019, https://doi.org/10.12989/anr.2019.7.3.181
  28. A study on the structural behaviour of functionally graded porous plates on elastic foundation using a new quasi-3D model: Bending and free vibration analysis vol.25, pp.1, 2020, https://doi.org/10.12989/cac.2020.25.1.037
  29. Vibration analysis of FG porous rectangular plates reinforced by graphene platelets vol.34, pp.2, 2020, https://doi.org/10.12989/scs.2020.34.2.215
  30. Geometrically nonlinear dynamic analysis of FG graphene platelets-reinforced nanocomposite cylinder: MLPG method based on a modified nonlinear micromechanical model vol.35, pp.1, 2020, https://doi.org/10.12989/scs.2020.35.1.077
  31. Influence of porosity distribution on vibration analysis of GPLs-reinforcement sectorial plate vol.35, pp.1, 2015, https://doi.org/10.12989/scs.2020.35.1.111
  32. Vibrational characteristic of FG porous conical shells using Donnell's shell theory vol.35, pp.2, 2015, https://doi.org/10.12989/scs.2020.35.2.249
  33. Influence of internal pores and graphene platelets on vibration of non-uniform functionally graded columns vol.35, pp.2, 2015, https://doi.org/10.12989/scs.2020.35.2.295
  34. Vibration behavior of functionally graded sandwich beam with porous core and nanocomposite layers vol.36, pp.1, 2020, https://doi.org/10.12989/scs.2020.36.1.001
  35. Vibration behavior of trapezoidal sandwich plate with functionally graded-porous core and graphene platelet-reinforced layers vol.36, pp.1, 2015, https://doi.org/10.12989/scs.2020.36.1.047
  36. Vibration analysis of sandwich sector plate with porous core and functionally graded wavy carbon nanotube-reinforced layers vol.37, pp.6, 2015, https://doi.org/10.12989/scs.2020.37.6.711
  37. Vibration analysis of damaged core laminated curved panels with functionally graded sheets and finite length vol.38, pp.5, 2015, https://doi.org/10.12989/scs.2021.38.5.477