DOI QR코드

DOI QR Code

CPT-based p-y analysis for mono-piles in sands under static and cyclic loading conditions

  • Kim, Garam (Department of Civil and Environmental Engineering, Yonsei University) ;
  • Kyung, Doohyun (Department of Civil and Environmental Engineering, Yonsei University) ;
  • Park, Donggyu (Department of Civil and Environmental Engineering, Yonsei University) ;
  • Lee, Junhwan (Department of Civil and Environmental Engineering, Yonsei University)
  • 투고 : 2014.08.07
  • 심사 : 2015.04.25
  • 발행 : 2015.09.25

초록

In the present study, a CPT-based p-y analysis method was proposed for offshore mono-piles embedded in sands. Static and cyclic loading conditions were both taken into account for the proposed method. The continuous soil profiling capability of CPT was an important consideration for the proposed method, where detailed soil profile condition with depth can be readily incorporated into the analysis. The hyperbolic function was adopted to describe the non-linear p-y curves. For the proposed hyperbolic p-y relationship, the ultimate lateral soil resistance $p_u$ was given as a function of the cone resistance, which is directly introduced into the analysis as an input data. For cyclic loading condition, two different cyclic modification factors were considered and compared. Case examples were selected to check the validity of the proposed CPT-based method. Calculated lateral displacements and bending moments from the proposed method were in good agreement with measured results for lateral displacement and bending moment profiles. It was observed the accuracy of calculated results for the conventional approach was largely dependent on the selection of friction angle that is to be adopted into the analysis.

키워드

과제정보

연구 과제 주관 기관 : National Research Foundation of Korea (NRF)

참고문헌

  1. American Petroleum Institute, API. (2010), Recommended Practice for Planning, Designing and Constructing Fixed Offshore Platforms - Working Stress Design, API Recommended Practice 2A-WSD (RP2A-WSD), (21st Edition), API Publishing Services, Washington D. C.
  2. Bienen, B., Duhrkop, J., Grabe, J., Randolph, M.F. and White, D.J. (2012), "Response of piles with wings to monotonic and cyclic lateral loading in sand", J. Geotech. Geoenviron. Eng., ASCE, 138(3), 364-375. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000592
  3. Blaney, G.W. and O'Neill, M.W. (1986), "Measured lateral response of mass on single pile in clay", J. Geotech. Eng., ASCE, 112(4), 443-457. https://doi.org/10.1061/(ASCE)0733-9410(1986)112:4(443)
  4. Briaud, J.L., Tucker, L., Lytton, R.L. and Coyle, H.M. (1985), "Behavior of piles and pile groups in cohesionless soils", Final Report, Report No. FHWA/RD-83/038, NTIS PB86-152089/AS.
  5. Chang, B.J. and Hutchinson, T.C. (2013), "Experimental evaluation of p-y curves considering development of liquefaction", J. Geotech. Geoenviron. Eng., ASCE, 139(4), 577-586. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000802
  6. Det Norske Veritas, DNV. (2013), Design of Offshore Wind Turbine Structures, Offshore Standard DNV-OS-J101.
  7. Dyson, G.J. and Randolph, M.F. (2001), "Monotonic lateral loading of piles in calcareous sand", J. Geotech. Geoenviron. Eng., ASCE, 127(4), 346-352. https://doi.org/10.1061/(ASCE)1090-0241(2001)127:4(346)
  8. Franke, K. and Rollins, K. (2013), "Simplified hybrid p-y spring model for liquefied soils", J. Geotech. Geoenviron. Eng., ASCE, 139(4), 564-576. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000750
  9. Gabr, M., Lunne, T. and Powell, J. (1994), "P-y analysis of laterally loaded piles in clay using DMT", J. Geotech. Eng., ASCE, 120(5), 816-837. https://doi.org/10.1061/(ASCE)0733-9410(1994)120:5(816)
  10. Goh, A.T.C., Teh, C.I. and Wong, K.S. (1997), "Analysis of piles subjected to embankment induced lateral soil movements", J. Geotech. Geoenviron. Eng., ASCE, 123(9), 792-801. https://doi.org/10.1061/(ASCE)1090-0241(1997)123:9(792)
  11. Haldar, S. and Babu, G.S. (2009), "Design of laterally loaded piles in clays based on cone penetration test data: a reliability-based approach", Geotechnique, 59(7), 593-607. https://doi.org/10.1680/geot.8.066.3685
  12. Hettler, A. (1981), "Verschiebungen starrer und elastischer Grundungskorper in Sand bei monotoner und zyklischer Belastung." ph.D. Dissertation, University of Karlsruhe, Karlsruhe.
  13. Khalili-Tehrani, P., Ahlberg, E.R., Rha, C., Lemnitzer, A., Stewart, J.P., Taciroglu, E. and Wallace, J.W. (2014), "Nonlinear load-deflection behavior of reinforced concrete drilled piles in stiff clay", J. Geotech. Geoenviron. Eng., ASCE, 140(3), 04013022. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000957
  14. Kim, B.T., Kim, N.K., Lee, W.J. and Kim, Y.S. (2004), "Experimental load-transfer curves of laterally loaded piles in nak-dong river sand", J. Geotech. Geoenviron. Eng., ASCE, 130(4), 416-425. https://doi.org/10.1061/(ASCE)1090-0241(2004)130:4(416)
  15. Kondner, R.L. (1963), "Hyperbolic stress-strain response of cohesive soils", J. Soil Mech. Found. Div., ASCE, 89(1), 115-143.
  16. Kumar, S., Lalvani, L. and Omar, M. (2006), "Nonlinear response of single piles in sand subjected to lateral loads using khmax approach", Geotech. Geol. Eng., 24(1), 163-181. https://doi.org/10.1007/s10706-004-2760-4
  17. Lee, J. and Randolph, M. (2011), "Penetrometer-based assessment of spudcan penetration resistance", J. Geotech. Geoenviron. Eng., ASCE, 137(6), 587-596. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000469
  18. Lee, J.H. and Salgado, R. (1999), "Determination of pile base resistance in sands", J. Geotech. Geoenviron. Eng., 125(8), 673-683. https://doi.org/10.1061/(ASCE)1090-0241(1999)125:8(673)
  19. Lee, J., Eun, J., Lee, K., Park, Y. and Kim, M. (2008), "In-situ evaluation of strength and dilatancy of sands based on CPT results", Soil Found., 48(2), 255-266. https://doi.org/10.3208/sandf.48.255
  20. Lee, J., Kim, M. and Kyung, D. (2010), "Estimation of lateral load capacity of rigid short piles in sands using CPT results", J. Geotech. Geoenviron. Eng., ASCE, 136(1), 48-56. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000199
  21. Little, R.L. and Briaud, J.L. (1988), "Full scale cyclic lateral load tests on six single piles in sand", Miscellaneous Paper GL-88-27; Geotechnical Div., Texas A&M University, College Station, TX, USA.
  22. Matlock, H. (1970), "Correlation for design of laterally loaded piles in soft clay", Proceedings of the 2nd Annual Offshore Technology Conference, OTC, Houston, TX, USA, April, pp. 577-594.
  23. Matlock, H. and Reese, L.C. (1960), "Generalized solutions for laterally loaded piles", J. Soil Mech. Found., ASCE, 86(5), 63-91.
  24. McGann, C.R., Arduino, P. and Mackenzie-Helnwein, P. (2011), "Applicability of conventional p-y relations to the analysis of piles in laterally spreading soil", J. Geotech. Geoenviron. Eng., ASCE, 137(6), 557-567. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000468
  25. Novello, E.A. (1999), "From static to cyclic p-y data in calcareous sediments", Proceedings of Engineering for Calcareous Sediments, Balkema, Rotterdam, The Netherlands.
  26. Pando, M., Ealy, C., Filz, G., Lesko, J. and Hoppe, E. (2006), "A Laboratory and Field Study of Composite Piles for Bridge Substructures", Report FHWA-HRT-04-043; FHWA.
  27. Reese, L.C. (1997), "Analysis of laterally loaded piles in weak rock", J. Geotech. Geoenviron. Eng., ASCE, 123(11), 1010-1017. https://doi.org/10.1061/(ASCE)1090-0241(1997)123:11(1010)
  28. Reese, L.C., Cox, W.R. and Koop, F.D. (1974), "Analysis of laterally loaded piles in sand", Proceedings of the 6th Annual Offshore Technology Conference, OTC, Houston, TX, USA, May, pp, 473-485.
  29. Reese, L.C., Cox, W.R. and Koop, F.D. (1975), "Field testing and analysis of laterally loaded piles in stiff clay", Proceedings of the 7th Offshore Technology Conference, OTC, Houston, TX, USA, May, pp. 671-690.
  30. Rix, G.J. and Stokoe, K.H. (1991), "Correlation of initial tangent modulus and cone penetration resistance", Proceedings of the 1st International Symposium on Calibration Chamber Testing, Potsdam, NY, USA, June, pp. 351-362.
  31. Robertson, P.K. and Campanella, R.G. (1983), "Interpretation of cone penetration tests I: sand", Can. Geotech. J., 109(11), 1449-1459.
  32. Robertson, P.K., Davis, M.P. and Campanella, R.G. (1989), "Design of laterally loaded driven piles using the flat dilatometer", Geotech. Test. J., 12(1), 30-38. https://doi.org/10.1520/GTJ10671J
  33. Rollins, K.M., Lane, J.D. and Gerber, T.M. (2005), "Measured and computed lateral response of a pile group in sand", J. Geotech. Geoenviron. Eng., ASCE, 131(1), 103-114. https://doi.org/10.1061/(ASCE)1090-0241(2005)131:1(103)
  34. Rosquoet, F., Thorel, L., Garnier, J. and Canepa, Y. (2007), "Lateral cyclic loading of sand-installed piles", Soil. Found., 47(5), 821-832. https://doi.org/10.3208/sandf.47.821
  35. Schnaid, F. and Houlsby, G.T. (1991), "An assessment of chamber size effects in the calibration of in situ tests in sand", Geotechnique, 41(3), 437-445. https://doi.org/10.1680/geot.1991.41.3.437
  36. Suryasentana, S. and Lehane, B.M. (2014), "Numerical derivation of CPT-based p-y curves for piles in sand", Geotechnique, 64(3), 186-194. https://doi.org/10.1680/geot.13.P.026
  37. Titi, H.H., Mohammad, L.N. and Tumay, M.T. (2000), "Miniature cone penetration tests in soft and stiff clays", Geotech. Test. J., ASTM, 23(4), 432-443. https://doi.org/10.1520/GTJ11064J
  38. Tumay, M.T. and Kurup, P.U. (2001), "Development of a continuous intrusion miniature cone penetration test system for subsurface explorations", Soil. Found., 41(6), 129-138. https://doi.org/10.3208/sandf.41.6_129
  39. Winkler, E. (1867), Die Lehre von der Elastisitat und Festigkeit, Dominicus, Prague, Czech Republic.

피인용 문헌

  1. Hard particle force in a soft fracture vol.9, pp.1, 2019, https://doi.org/10.1038/s41598-019-40179-4
  2. Analysis of soil resistance on drilled shafts using proposed cyclic p-y curves in weathered soil vol.12, pp.3, 2017, https://doi.org/10.12989/gae.2017.12.3.505
  3. Study on the Dynamic Soil-Pile-Structure Interactive Behavior in Liquefiable Sand by 3D Numerical Simulation vol.10, pp.8, 2015, https://doi.org/10.3390/app10082723
  4. Three-dimensional modeling of monopiles in sand subjected to lateral loading under static and cyclic conditions vol.26, pp.2, 2015, https://doi.org/10.12989/gae.2021.26.2.175