Journal of Drive and Control (드라이브 ㆍ 컨트롤)

The Korean Society for Fluid Power and Construction Equipment (유공압건설기계학회)
권호 표지
DOI QR코드

DOI QR Code

Robust Control System Design for Robot Motion Regeneration under Disturbance Input

로봇 모션 재현을 위한 강인한 제어시스템 설계: 외란을 고려한 경우

  • Dang, Dac-Chi. (Department of Control & Mechanical Engineering, the Graduate School, Pukyong National University) ;
  • Kang, C.N. (Department of Mechanical Engineering, Jeju National University) ;
  • Kim, Y.B. (Department of Control & Mechanical Engineering, the Graduate School, Pukyong National University)
  • Received : 2015.04.27
  • Accepted : 2015.07.13
  • Published : 2015.09.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper, the authors propose a method to easily recognize and reproduce the robot motion made by an operator. This method is targets for applications similar to painting and welding, and it is based on a process of that identifies a family of plants, by control design and by conducting an experimental evaluation. In this study, the models and controllers for all joints of 3DOF robot system are obtained individually. And a robust control system for motion control of the individual joints is designed based on $H_{\infty}$ control framework. An experimental comparison is made between the proposed control method and existing PID control method. And the results indicate that the proposed designing method is more efficient and useful than conventional method.

Keywords

References

  1. C. P. Hung and W. G. Liu, 2012, "Intuitive Embedded Teaching System Design for Multi-Jointed Robots", Int. Journal of Advanced Robotic Systems, Vol. 9, 34:2012. https://doi.org/10.5772/50604
  2. M. Ishii, 1992, "A Robot Teaching Method Using Hyper Card System", Proc. of Robot and Human Communication, pp. 410-412.
  3. R. Ikeura, and H. Inooka, 1994, "Manual Control Approach to the Teaching of a Robot Task", IEEE Trans. on Systems, Man and Cybernetics, Vol. 24, No. 9, pp.1339-1346. https://doi.org/10.1109/21.310510
  4. M. T. Soylemez, M. Gokasan and S. Bogosyan, 2003, "Position Control of a Single-Link Robot- Arm Using a Multi-Loop PI Controller", Proc. of IEEE Conf. Vol. 2, pp. 1001-1006.
  5. M. Jin, J. Lee, P. H. Chang, and C. Choi, 2009, "Practical Non-singular Terminal Sliding-Mode Control of Robot Manipulators for High-Accuracy Tracking Control", IEEE trans on Industrial Electronics, Vol. 56, No. 9, pp. 3593-3601. https://doi.org/10.1109/TIE.2009.2024097
  6. C. Chiena and A. Tayebib, 2008, "Further Results on Adaptive Iterative Learning Control of Robot Manipulators", Automatica, Vol. 44, pp. 830-837. https://doi.org/10.1016/j.automatica.2007.06.023
  7. P. Tomei, 1991, "Adaptive PD Controller for Robot Manipulators", IEEE Transactions on Robotics and Automation, Vol. 7, pp. 565-570. https://doi.org/10.1109/70.86088
  8. T. Sun, H. Pei, Y. Pan, H. Zhou, and C. Zhang, 2011, "Neural Network-based Sliding Mode Adaptive Control for Robot Manipulators", Neuron Computing, Vol. 74, pp. 2377-2384.
  9. R. J. Wai and P. C. Chen, 2006, "Robust Neural-Fuzzy-Network Control for Robot Manipulator Including Actuator" IEEE Trans. on Industrial Electronic, Vol. 53, pp. 1328-1349. https://doi.org/10.1109/TIE.2006.878297
  10. J. Swevers, W. Verdonck and J. De Schutter, 2007 "Dynamic Model Identification for Industrial Robots", IEEE Trans on Control System, Vol. 27, Issue 5, pp. 58-71.
  11. N. A Bompos, P. K Artemiadis, A. S Oikonomopoulos and K. J Kyriakopoulos, 2007, "Modeling, Full Identification and Control of the Mitsubishi PA-10 Robot Arm", Int. Conference on Advanced Intelligent Mechatronics, pp. 1-6.
  12. E. J. Adam and E. D. Guestrin, 2002, "Identification and Robust Control of an Experimental Servo Motor", ISA Trans., Vol. 41, Issue 2, pp. 225-234. https://doi.org/10.1016/S0019-0578(07)60082-2
  13. V. A. Oliveira, E. S. Tognetti and Daniel Siqueira, 2006, "Robust Controllers Enhanced with Design and Implementation Processes", IEEE Trans. Educ., Vol. 49, No. 3, pp. 370-382. https://doi.org/10.1109/TE.2006.879263
  14. R. Y. Chiang and M. G. Safonov, 1996, "Robust Control Toolbox User's Guide", Natick, MA: The MathWorks Inc.
  15. Gu D. W., Petrov P. H. and Konstantinov M. M, 2005, "Robust Control Design with Matlab", Springer.

Cited by

  1. Dynamics Identification and Robust Control Performance Evaluation of Towing Rope under Rope Length Variation vol.20, pp.2, 2016, https://doi.org/10.9726/kspse.2016.20.2.058
  2. Robot Motion Regeneration based on Independent Arm Control System Design Method vol.21, pp.1, 2017, https://doi.org/10.9726/kspse.2017.21.1.030