References
- Glodez, S., Ren, Z., and Flasker, J., "Surface Fatigue of Gear Teeth Flanks," Computers & Structures, Vol. 73, No. 1, 1999, pp. 475-483. https://doi.org/10.1016/S0045-7949(98)00251-X
- Kim, C.H., Ahn, H.S., and Chong, T.H., "On a Method for the Durability Enhancement of Plastic Spur Gear Using Finite Element Analysis," Trans. of KSME (A), Vol. 27, No. 2, 2003, pp. 223-230.
- Chen, Y.C. and Tsay, C.B., "Stress Analysis of a Helical Gear Set with Localized Bearing Contact," Finite Element in Analysis and Design, Vol. 38, No. 8, 2002, pp. 707-723. https://doi.org/10.1016/S0168-874X(01)00100-7
- Guagliano, M., Riva, E., and Guidetti, M., "Contact Fatigue Failure Analysis of Shot-peened Gears," Engineering Failure Analysis, Vol. 9, No. 2, 2002, pp. 147-158. https://doi.org/10.1016/S1350-6307(01)00002-4
- Hwang, S.C., Lee, D.H., Park Y.C., and Lee, K.H., "Contact Stress Analysis of Helical Gear for Turbo Blower," J. of KSMPE, Vol. 10, No. 2, 2011, pp. 90-95.
- Asi, O., "Fatigue Failure of a Helical Gear in a Gearbox," Engineering Failure Analysis, Vol. 13, No. 7, 2006, pp. 1116-1125. https://doi.org/10.1016/j.engfailanal.2005.07.020
- Wang, J., Wang, Y., and Huo, Z., "Finite Element Residual Stress Analysis of Planetary Gear Tooth," Advances in Mech. Eng., Vol. 2013, 2013.
- Lee, D.S., Lee, K.J., Kim, T.H., Hwang, J.H., Lee, J.H., and Cheong, S.K., "Investigation of Optimal Peening Intensity of Gear with Stress Concentration for Improvement of Fatigue Life," Proc. of the KSME 2005 Annual Conf., Pyeongchang, Korea, Nov. 2005, pp. 1341-1346.
- Li, S. and Kahraman, A., "A Micro-pitting Model for Spur Gear Contacts," International Journal of Fatigue, Vol. 59 2014, pp. 224-233. https://doi.org/10.1016/j.ijfatigue.2013.08.015
- Townsend, D.P. and Akin, L.S., "Analytical and Experimental Spur Gear Tooth Temperature as Affected by Operating Variables," J. Mech. Design., Vol. 103, No. 1, 1981, pp. 219-226. https://doi.org/10.1115/1.3254868
- Wang, K.L. and Cheng, H.S., "A Numerical Solution to the Dynamic Load, Film Thickness and Surface Temperatures in Spur Gears," Part I: Analysis, J. Mech. Design., Vol. 103, No. 1, 1981, pp. 177-187.
- Wang, K.L. and Cheng, H.S., "A Numerical Solution to the Dynamic Load, Film Thickness and Surface Temperatures in Spur Gears," Part II: Results, J. Mech. Design., Vol. 103, No. 1, 1981, pp. 188-194.
- Long, H., Lord, A.A., Gethin, D.T., and Roylance, B.J., "Operating Temperatures of Oil-lubricated Medium-speed Gears: Numerical Models and Experimental Results," Proc. Instn. Mech. Engrs. Part G: J. Aerospace Engr., Vol. 217, No. 2, 2003, pp. 87-106.
- http://www.matweb.com/
- Shigley, J.E., Mischke, C.R., and Budynas, R.G.., Mechanical Engineering Design, pp. 797-804 McGraw Hill, Singapore, 2004.