Journal of Korean Society of Steel Construction (한국강구조학회 논문집)

Korean Society of Steel Construction (한국강구조학회)
권호 표지
DOI QR코드

DOI QR Code

Deformation Capacity of Inverted V-Type Brace Strengthened by Built-up Non-welded Buckling Restraint Element

조립형 무용접 좌굴방지재로 보강된 역V형 가새의 변형성능

  • 김선희 (서울시립대학교, 건축공학부) ;
  • 문지영 ((주)다스구조엔지니어링) ;
  • 최성모 (서울시립대학교, 건축학부)
  • Received : 2014.11.13
  • Accepted : 2015.01.19
  • Published : 2015.06.27
Download PDF
⟨ Previous Next ⟩

Abstract

Steel concentrically braced frame is an efficient system that can acquire resistance against the lateral force of buildings with the least amount of quantity. In this study is intended to proceed on the research of schemes for reinforcement by supplementing previously installed H-formed brace with non-welded cold-formed plastic stiffening materials restricting the flexure and buckling and acquire a consistent strength on the tensile and compressive force. As for the measures of supplementing previously-installed inverted V-formed braced frame, stiffening materials in the previous studies were converted to weak-axial supplementing materials to suggest a specific scheme evaluating the structural function through an experiment of members, interpretation of members, and frame-focused experiment. Reinforced brace satisfied the requirement to be prevent AISC brace from being ruptured due to imbalanced strength in the beam.

철골 중심 가새 골조는 최소의 물량으로 건물의 횡력에 대한 저항력을 확보할 수 있는 매우 효과적인 시스템이다. 본 논문에서는 기 설치된 H형 가새를 무 용접 냉간 성형보강재로 보강하여 휨-좌굴을 억제하고 인장력과 압축력에 동일한 강도를 확보하는 보강안에 대한 연구를 진행하였다. 역 V형 가새 골조에 설치된 H형가 새의 보강방안으로 선행연구의 보강재를 약축 보강형으로 변경하여 보강방안을 제시하고 부재실험, 부재변수해석, 골조실험을 통해 구조성능을 평가하였다. 보강된 가새는 AISC기준을 만족하였다. 이를 통해 보강으로 골조내 가새의 불 균형력에 의한 보의 파괴가 방지될 것으로 기대된다.

Keywords

References

  1. 유정한(2013) 중앙부 거셋 플레이트의 다층 X-가새 골조거동에 미치는 영향, 한국강구조학회논문집, 한국강구조학회, Vol.25, No.2, pp.179-186. (Yoo, J.H. (2013) Effect of Mid-span Gusset Plates on the Behavior of Multi-Story X-Braced Frames. Journal of Korean Society of Steel Construction, KSSC, Vol.25, No.2, pp.179-186 (in Korean).)
  2. 이종혁, 주영규, 김영주, 김상대(2010) Diagrid BRB의 실험적 구조성능 평가, 한국강구조학회논문집, 한국강구조학회, Vol.22, No.3, pp.261-270. (Lee, J.H., Ju, Y.K., Kim, Y.J., and Kim, S.D. (2010) Experimental Evaluation for structural Performance of Diagrid BRB Structural System, Journal of Korean Society of Steel Construction, KSSC, Vol.22, No.1, pp.261-270 (in Korean).)
  3. 조준희, 김정재, 이철호(2010) 가새좌굴을 고려한 역 V형 가새골조의 기둥부재 내진설계법, 한국강구조학회논문집, 한국강구조학회, Vol.22, No.1, pp.1-12. (Cho, C.H., Kim, J.J., and Lee, C.H. (2010) Seismic Design of Columns in Inverted V-Braced Steel Frames Considering Brace Buckling, Journal of Korean Society of Steel Construction, KSSC, Vol.22, No.1, pp.1-12 (in Korean).
  4. ASCE 7-10 (2013) Minimum Design Loads for Buildings and Other Structures, American Society of Civil Engineers.
  5. New Zealand Standard (2009) NZS 4219;2009, Seismic Performance of Engineering Systems in Buildings (ISBN:1-86975-114-0).)
  6. 대한건축학회(2009) 건축구조설계기준 (KBC-2009). (AIK (2009) Korean Building Code and Commentary, KBC-2009, Architectural Institute of Korea (in Korean).
  7. 강구조의 설계(2009) 한국강구조학회, 구미서관 (Steel Design (2009) Korea Society of Steel Construction, Goomibook (in Korean).)
  8. Kazuo, I., Shinichi, S., and Yasuo, H. (2001) Stiffening Requirement for Unbonded Braces Encased in Concrete Panels, Journal of Structural Engineering, No.127, pp.712-719.
  9. 김선희, 김도범, 최성모(2015) 무용접 냉간성형 조립재로 보강한 H형강 가새의 압축거동, 한국강구조학회논문집, 한국강구조학회, Vol.27, No.2, pp.169-180. (Kim, S.K., Kim, D.B., and Choi, S.M. (2015) Compressive Behavior of H-section Brace strengthened by Non-welded Cold-Formed Element, Journal of Korean Society of Steel Construction, KSSC, Vol.27, No.2, pp.169-180 (in Korean).)
  10. 김선희, 문지영, 최성모(2015) 무용접 좌굴방지재로 보강한 철골 가새의 구조거동, 한국강구조학회논문집, 한국강구조학회, Vol.27, No.2, pp.207-217. (Kim, S.H., Moon, J.Y., and Choi, S.M. (2015) Structural Behavior of steel Brace strengthened with Non-welded Buckling Restraint Casing, Journal of Korean Society of Steel Construction, KSSC, Vol.27, No.2, pp.207-217 (in Korean).)
  11. Rafael, S., Charles, W.R., and Jerome, F.H. (2013) NEHRP Seismic Design Technical Brief No.8- "Seismic Design of steel special concentrically Braced frame systems", NIST GCR 13-917-24.
  12. Lin, M.L., Tsai, K.C., Hsiao, P.C., and Tsai, C.Y. (2005) Compressive behavior of buckling restrained braced gusset connections, Advances in Experimental Structural Engineering, Japan.
  13. KS B 0801 (2007) 금속재료 인장시험편, 산업자원부 기술표준원. (KS B 0801 (2007) Test Pieces for Tensile test for Metallic Materials, Korea Agency for Tech- nology and Standards (in Korean).)
  14. KS B 0802 (2003) 금속재료 인장시험벙법, 산업자원부 기술표준원. (KS B 0802 (2003) Method of Tensile test for metallic Materials, Korea Agency for Technology and Standards (in Korean).)
  15. AISC (2010) Seismic provisions for structural steel buildings, American Institute of Steel Construction Ins.
  16. FEMA-356 (2000) Pre-standard and Commentary for The Seismic Rehabilitation of Buildings, Federal Emergency Management Agency, Washington DC.