References
- Ando, K., Tsuji, K., Hirasawa, T., Kobayashi, Y., Chu, M. C. and Sato, S., 1999, "Crack Healing Behavior and High Temperature Strength of Mulltite/SiC Composite Ceramics," Journal of the Society of Materials Science (Japan), Vol. 48, No. 5, pp. 489-494. https://doi.org/10.2472/jsms.48.489
-
Ando, K., Houjyou, K., Chu, M. C., Takeshita, S., Takahashi, K., Sakamoto, S. and Sato, S., 2002, "Crack Healing Behavior of
$Si_3N_4/SiC$ Ceramics under Stress and Fatigue Strength at the Temperature of Healing," Journal of the European Ceramic Society, Vol. 22, pp. 1339-1346. https://doi.org/10.1016/S0955-2219(01)00435-6 - Kim, B. A., Ando, K., Chu, M. C. and Sato, S., 2003, "Crack Healing Behavior of Monolithic Alumina and Strength of Crack-Healed Member," Journal of the Society of Materials Science(Japan), Vol. 52, No. 6, pp. 667-673. https://doi.org/10.2472/jsms.52.667
-
Nam, K. W., Kim, M. K., Park, S. W., Ahn, S. H. and Kim, J. S., 2007, "Crack Healing Behavior and Bending Strength of
$Si_3N_4/SiC$ Composite Ceramics by$SiO_2$ Colloidal," Materials Science and Engineering( A), Vol. 471, Nos. 1-2, pp. 102-105. https://doi.org/10.1016/j.msea.2007.03.005 -
Kim, H. S., Kim, M. K., Kim, J. W., Ahn, S. H. and Nam, K. W., 2007, "Strength of Crack Healed-Specimen and Elastic Wave Characteristics of
$Al_2O_3/SiC$ Composite Ceramics," Trans. Korean Soc. Mech. Eng. A, Vol. 31, No. 4, pp. 425-431. https://doi.org/10.3795/KSME-A.2007.31.4.425 -
Nam, K. W., Kim, H. S., Son, C. S., Kim, S. K. and Ahn, S. H., 2007, "Crack Healing and Elevated Temperature Bending Strength of
$Al_2O_3$ Composite Ceramics by an amount of$Y_2O_3$ ," Trans. Korean Soc. Mech. Eng. A, Vol. 31, No. 11, pp. 1108-1114. https://doi.org/10.3795/KSME-A.2007.31.11.1108 -
Nam, K. W., Park, S. W., Do, J. Y. and Ahn, S. H., 2008, "Crack Healing and Bending Strength of
$Si_3N_4$ Ceramics," Trans. Korean Soc. Mech. Eng. A, Vol. 32, No. 11, pp. 957-962. https://doi.org/10.3795/KSME-A.2008.32.11.957 - Hori, S., 1990, Kyoujin Jirukonia, Uchidaroukakuho, Tokyo, pp. 106-112.
- Kim, S. J., Kong, Y. S. and Lee, S. Y., 2009, "Weibull Statistical Analysis of Micro-Vickers Hardness using Monte-Carlo Simulation," Trans. Korean Soc. Mech. Eng. A, Vol. 33, No. 4, pp. 346-352. https://doi.org/10.3795/KSME-A.2009.33.4.346
- Gong, J. H., Wu, J. J. and Guan, Z. D., 1999, "Examination of the Indentation Size Effect in Low-load Vickers Hardness Testing of Ceramics," Journal of the European Ceramic Society, Vol. 19, pp. 2625-2631. https://doi.org/10.1016/S0955-2219(99)00043-6
Cited by
- Composites Ceramics by Different Shot Size vol.40, pp.12, 2016, https://doi.org/10.3795/KSME-A.2016.40.12.987
- Weibull Statistical Analysis on the Mechanical Properties of SiC by Immersion in Acidic and Alkaline Solutions vol.40, pp.9, 2016, https://doi.org/10.3795/KSME-A.2016.40.9.767