References
- European Commission, 2013, "Climate Action: Building a World We Like, with a Climate We Like," Luxembourg, Publications Office.
- United Nations, 2013, "United Nations Global Compact International Yearbook 2013," United Nations Pubns.
- Alkiad, A. C. and Eltary, S. H., 2003, "Contributors to the Fuel Economy Advantage of DISI Engines Over PFI Engines," SAE Technical paper, 2003-01-3101.
- Lee, J., Kang, J. and Kim, D., 2003, "Effect of Injection Timing and Intake Flow on In-cylinder Fuel Behavior in a GDI Engine," Trans. Korean Soc. Auto. Eng., Vol. 11, No. 6, pp. 7-13.
- Szekely, G. A. and Alkiads, A. C., 2005, "Combustion Characteristics of a Spray-Guided Direct Injection Stratified-Charge Engine with a High Squish Piston," SAE Technical paper, 2005-01-1937.
- Choi, B. C., 2001, "Technologies for Emission Aftertreatment," Baro Press Co., pp. 351-352.
- Borgan, M. S., Brisley, R. J., Walker, A. P., Webster, D. E., Boegner, W., Fekete, N. P., Kramer, M., Krutzsch, B. and Voigtlander, D., 1995, "Evaluation of NOx Storage Catalysts as an Effective System for NOx Removal from the Exhaust Gas of Leanburn Gasoline Engine," SAE Technical paper, 952490.
- Lee, C. H., Choi, B. C. and Juhng, W. N., 2004, "Comparison of NOx Reduction Characteristics of NOx Adsorption Catalyst with TWC for Lean-burn Natural Gas Vehicles," 2004 KSAE Spring Conference, pp. 579-584.
- Piock, W. F., Weyand, P., Wolf, E. and Heise, V., 2010, "Ignition Systems for Spray-Guided Stratified Combustion," SAE Technical paper, 2010-10-0598.
- Husted, H. L., Piock, W. and Ramsay, G., 2009, "Fuel Efficiency Improvements from Lean, Stratified Combustion with a Solenoid Injector," SAE Technical paper, 2009-10-1485.
- Baek, K. H., Yoo, S. Y., Bae, G. S., Woo, M. S. and Kim, W. G., 2010, "A Study on Regeneration Strategies of Cordierite-DPF Applied to a Diesel Vehicle," 2010 KSAE Annual Conference and Exhibitions, pp. 833-840.
-
Prigent, M. and Soete, G. De, 1989, "Nitrous Oxide
$N_2O$ in Engine Exhaust Gases-A Frist Appraisal of Catalyst Impact," SAE Technical paper, 890492. - Torres, J. Q., Royer, S., Bellat, J. P., Giraudon, J. M. and Lamonier, J. F., 2013, "Formaldehyde: Catalytic Oxidation as a Promising Soft Way of Elimination," Che. Sus. Chem. Vol. 6, pp. 578-592. https://doi.org/10.1002/cssc.201200809
-
Kwon, D. W., Seo, P. W., Kim, G. J. and Hong, S. C., 2015, "Characteristics of the HCHO Oxidation Reaction over Pt/
$TiO_2$ Catalysts at Room Temperature: The Effect of Relative Humidity on Catalytic Activity," Applied Catalysis B: Environmental, Vol. 163, pp.436-443. https://doi.org/10.1016/j.apcatb.2014.08.024 -
Choi, B. C., "Characteristics of Formaldehyde and
$N_2O$ Formation from Catalytic Reaction of Methane," Trans. Korean Soc. Auto. Eng., Vol. 3, No. 2, pp. 95-101. -
Burch, R., Daniells, S. T. and Hu, P., 2002, "
$N_2O$ and$NO_2$ Formation on Pt(111): A Density Functional Theory Study," The Journal of Chemical Physics, Vol. 117, pp. 2902-2908. https://doi.org/10.1063/1.1490338 - 'A-Centeno, I. M. and Fuentes, G. A., 2009, "Nitrous Oxide Formation During Light-Off Over a Commercial Pd-Containing Three-Way Catalytic Converter: The Effect of Low-Sulfur Gasoline," Chem. Eng. Comm., Vol. 196, pp. 1140-1151. https://doi.org/10.1080/00986440902831664
- Perez, V. R., 2013, "Optimizatio of N2O Decomposition RhOx/ceria Catalysts and Design of a High N2-selective deNOx System for Diesel Vehicles," Ph.D Thesis, Universidad de Alicante.
- Zhang, C. B. and He H., 2007, "A Comparative Study of TiO2 Supported Noble Metal Catalysts for the Oxidation of Formaldehyde at Room Temperature," Catalysis Today, Vol. 126, pp. 345-350. https://doi.org/10.1016/j.cattod.2007.06.010