References
- Krennmair G, Krainhofner M, Piehslinger E. The influence of bar design (round versus milled bar) on prosthodontic maintenance of mandibular overdentures supported by 4 implants: a 5-year prospective study. Int J Prosthodont 2008;21: 514-20.
- Krennmair G, Piehslinger E. Removable implant-supported maxillary prostheses anchored on milled bars: a retrospective evaluation of two concepts. Int J Prosthodont 2009;22:576-8.
- Andreiotelli M, Att W, Strub JR. Prosthodontic complications with implant overdentures: a systematic literature review. Int J Prosthodont 2010;23:195-203.
- Brosky ME, Korioth TW, Hodges J. The anterior cantilever in the implant-supported screw-retained mandibular prosthesis. J Prosthet Dent 2003;89:244-9. https://doi.org/10.1067/mpr.2003.43
- Krennmair G, Krainhofner M, Piehslinger E. Implantsupported mandibular overdentures retained with a milled bar: a retrospective study. Int J Oral Maxillofac Implants 2007;22:987-94.
- Krennmair G, Suto D, Seemann R, Piehslinger E. Removable four implant-supported mandibular overdentures rigidly retained with telescopic crowns or milled bars: a 3-year prospective study. Clin Oral Implants Res 2012;23:481-8. https://doi.org/10.1111/j.1600-0501.2011.02169.x
- Meijer HJ, Raghoebar GM, Batenburg RH, Visser A, Vissink A. Mandibular overdentures supported by two or four endosseous implants: a 10-year clinical trial. Clin Oral Implants Res 2009;20:722-8. https://doi.org/10.1111/j.1600-0501.2009.01710.x
- Ueda T, Kremer U, Katsoulis J, Mericske-Stern R. Long-term results of mandibular implants supporting an overdenture: implant survival, failures, and crestal bone level changes. Int J Oral Maxillofac Implants 2011;26:365-72.
- Rinke S, Roediger M, Eickholz P, Lange K, Ziebolz D. Technical and biological complications of single-molar implant restorations. Clin Oral Implants Res 2015;26:1024-30. https://doi.org/10.1111/clr.12382
- Frisch E, Ziebolz D, Ratka-Kruger P, Rinke S. Double crown-retained maxillary overdentures: 5-year follow-up. Clin Implant Dent Relat Res 2015;17:22-31. https://doi.org/10.1111/cid.12087
- Abd El-Dayem MA, Assad AS, Eldin Sanad ME, Mahmoud Mogahed SA. Comparison of prefabricated and custommade bars used for implant-retained mandibular complete overdentures. Implant Dent 2009;18:501-11. https://doi.org/10.1097/ID.0b013e3181b4f857
- Cehreli MC, Karasoy D, Kokat AM, Akca K, Eckert S. A systematic review of marginal bone loss around implants retaining or supporting overdentures. Int J Oral Maxillofac Implants 2010;25:266-77.
- Rinke S, Ohl S, Ziebolz D, Lange K, Eickholz P. Prevalence of periimplant disease in partially edentulous patients: a practice-based cross-sectional study. Clin Oral Implants Res 2011; 22:826-33. https://doi.org/10.1111/j.1600-0501.2010.02061.x
- Bressan E, Tomasi C, Stellini E, Sivolella S, Favero G, Berglundh T. Implant-supported mandibular overdentures: a cross-sectional study. Clin Oral Implants Res 2012;23:814-9. https://doi.org/10.1111/j.1600-0501.2011.02225.x
- Heschl A, Payer M, Clar V, Stopper M, Wegscheider W, Lorenzoni M. Overdentures in the edentulous mandible supported by implants and retained by a Dolder bar: a 5-year prospective study. Clin Implant Dent Relat Res 2013;15:589-99. https://doi.org/10.1111/j.1708-8208.2011.00380.x
Cited by
- The novel use of inter-maxillary fixation screws as denture abutments in a Parkinson's patient vol.10, pp.3, 2016, https://doi.org/10.1111/ors.12237
- Peri-implant health, peri-implant mucositis, and peri-implantitis: Case definitions and diagnostic considerations vol.89, pp.00223492, 2018, https://doi.org/10.1002/JPER.17-0588
- Peri-implant health, peri-implant mucositis, and peri-implantitis: Case definitions and diagnostic considerations vol.45, pp.03036979, 2018, https://doi.org/10.1111/jcpe.12956
- Precision of the milled full-arch framework fabricated using pre-sintered soft alloy: A pilot study vol.10, pp.2, 2018, https://doi.org/10.4047/jap.2018.10.2.128
- Locator® versus ceramic/electroplated double-crown attachments: a prospective study on the intraindividual comparison of implant-supported mandibular prostheses pp.1436-3771, 2018, https://doi.org/10.1007/s00784-018-2491-1
- Rehabilitation of an Extremely Edentulous Atrophic Maxilla with a Pseudoskeletal Class III Relationship vol.2019, pp.None, 2015, https://doi.org/10.1155/2019/5696837
- Implant-supported overdentures with different clinical configurations: Mechanical resistance using a numerical approach vol.121, pp.3, 2015, https://doi.org/10.1016/j.prosdent.2018.09.023
- Surface Roughness and Necessity of Manual Refinishing Requirements of CAD/CAM-Manufactured Titanium and Cobalt-Chrome Bars - A Pilot Study vol.13, pp.1, 2015, https://doi.org/10.2174/1874210601913010316
- Patient compliance as a risk factor for the outcome of implant treatment vol.81, pp.1, 2019, https://doi.org/10.1111/prd.12293
- Oberflächengüte von CAD/CAM-gefrästen Implantatstegen aus Titan und Kobalt-Chrom vol.129, pp.11, 2015, https://doi.org/10.1055/a-1277-2646
- Realization of a Dental Framework by 3D Printing in Material Cobalt-Chromium with Superior Precision and Fitting Accuracy vol.13, pp.23, 2015, https://doi.org/10.3390/ma13235390