DOI QR코드

DOI QR Code

Comparative study on the behavior of soil fills on rigid acrylic and flexible geotextile containers

  • Kim, Hyeong-Joo (Department of Civil Engineering, Kunsan National University) ;
  • Won, Myoung-Soo (Department of Civil Engineering, Kunsan National University) ;
  • Lee, Jang-Baek (School of Civil and Environmental Engineering, Kunsan National University) ;
  • Joo, Jong-Hoon (School of Civil and Environmental Engineering, Kunsan National University) ;
  • Jamin, Jay C. (School of Civil and Environmental Engineering, Kunsan National University)
  • 투고 : 2015.04.28
  • 심사 : 2015.06.24
  • 발행 : 2015.08.25

초록

Comparative study has been performed to investigate the behavior of dredged fills on rigid (Model 1) and flexible (Model 2) containers. The study was focused on the sedimentation of soil fills and the development of total stresses. Model 1 is made of an acrylic cylinder and Model two is a scale-size geotextile tube. Results indicate that for rigid containers, significant decrease of the sediment height is apparent during the dewatering process. On the other hand, because the geotextile is permeable, the water is gradually dissipated during the filling process on flexible containers. Hence, significant loss in the tube height is not apparent during the duration of the test. Pressure spikes are apparent on rigid containers during the filling process which can be attributed to the confining effect due to hydrostatic pressure. For the flexible containers, the pressure readings gradually increases with time during the filling process and normalize at the end on the filling stage. No pressure spikes were apparent due to the gradual dissipation of pore water pressure.

키워드

참고문헌

  1. Alvarez, I.E., Rubio, R. and Ricalde, H. (2007), "Beach restoration with geotextile tubes as submerged breakwaters in Yucatan, Mexico", Geotext. Geomembr., 25(4-5), 233-241. https://doi.org/10.1016/j.geotexmem.2007.02.005
  2. Brink, N.R., Kim, H.J. and Znidarcic, D. (2015), "Numerical modeling procedures for consolidation of fine-grained materials in geotextile tubes", Proceedings of 2015 Geosynthetics Conference, Portland, OR, USA, February.
  3. Brink, N.R., Kim, H.J. and Znidarcic, D. (2013), "Consolidation modelling for geotextile tubes filled with fine-grained material", Proceedings of GhIGS GeoAfrica 2013 Conference, Accra, Ghana, November.
  4. Cantre, S. (2002), "Geotextile tubes-analytical design aspects", Geotext. Geomembr., 20(5), 305-319. https://doi.org/10.1016/S0266-1144(02)00029-8
  5. Cantre, S. and Saathoff, F. (2011), "Design method for geotextile hubes considering strain - Formulation and verification by laboratory tests using photogrammetry", Geotext. Geomembr., 29(3), 201-210. https://doi.org/10.1016/j.geotexmem.2010.10.009
  6. Fowler, J., Ortiz, C., Ruiz, N. and Martinez, E. (2002a), "Use of geotubes in Columbia, South America", Proceedings of the 7th International Conference on Geosynthetics, Nice, France, September, Volume 3, pp. 1129- 1132.
  7. Fowler, J., Stephens, T., Santiago, M. and De Bruin, P. (2002b), "Amwaj Islands constructed with geotubes, Bahrain", Proceedings of CEDA Conference, Denver, CO, USA, pp. 1-14.
  8. Gibeaut, J.C., Hepner, T.L., Waldinger, R., Andrews, J.R., Smyth, R.C., Gutierrez, R., Jackson J.A. and Jackson, K.G. (2003), "Geotubes for temporary erosion control and storm surge protection along the Gulf of Mexico shoreline of Texas", Proceedings of the 13th Biennial Coastal Zone Conference, Baltimore, MD, USA, July. [CD-ROM]
  9. Kim, H.J., Lee, K.W., Jo, S.K., Park, T.W. and Jamin, J.C. (2014a), "The influence of filling port system to the accretion and pressure distribution of dredged soil fill in acrylic tubes", Proceedings of the World Congress on Advances in Civil, Environmental and Materials Research (ACEM'14), Busan, Korea, August. [CD-ROM]
  10. Kim, H., Won, M. and Jamin, J. (2014b), "Finite-element analysis on the stability of geotextile tube-reinforced embankments under scouring", Int. J. Geomech. DOI: 10.1061/(ASCE)GM.1943-5622.0000420 , 06014019.
  11. Kim, H.J., Won, M.S., Kim, Y.B., Choi, M.J. and Jamin, J.C. (2014c), "Experimental analysis on composite geotextile tubes hydraulically filled underwater condition", Proceedings of the World Congress on Advances in Civil, Environmental and Materials Research (ACEM'14), Busan, Korea, August. [CD-ROM]
  12. Kim, H.J., Jamin, J.C. and Mission, J.L. (2013a), "Finite element analysis of ground modification techniques for improved stability of geotubes reinforced reclamation embankments subjected to scouring", Proceedings of the World Congress on Advances in Structural Engineering and Mechanics (ASEM'13), Jeju, Korea, September, pp. 2970-2979.
  13. Kim, H.J., Jamin, J.C., Won, M.S., Sung, H.J. and Lee, J.B. (2013b), "A study on the behavior of dredged soil stratified in a transparent geobag", Proceedings of the World Congress on Advances in Structural Engineering and Mechanics (ASEM'13), Jeju, Korea, September, pp. 2980-2987.
  14. Koerner, G.R. and Koerner, R.M. (2006), "Geotextile tube assessment using a hanging bag test", Geotext. Geomembr., 24(2), 129-137. https://doi.org/10.1016/j.geotexmem.2005.02.006
  15. Kriel, H.J. (2012), "Hydraulic stability of multi-layered sand-filled geotextile tube breakwaters under wave attack", M.Sc. Thesis; Stellenbosch University, South Africa.
  16. Lawson, C.R. (2008), "Geotextile containment for hydraulic and environmental engineering", Geosynth. Int., 15(6), 384-427. https://doi.org/10.1680/gein.2008.15.6.384
  17. Leshchinsky, D., Leshchinsky, O., Ling, H.I. and Gilbert, P.A. (1996), "Geosynthetic tubes for confining pressurized slurry: Some design aspects", J. Geotech. Eng., 122(8), 682-690. https://doi.org/10.1061/(ASCE)0733-9410(1996)122:8(682)
  18. Liu, G.S. and Silvester, R. (1977), "Sand sausages for beach defence work", Proceedings of the 6th Australasian Hydraulics and Fluid Mechanics Conference, Adelaide, Australia, December, pp. 340-343.
  19. Moo-Young, H.K., Gaffney, D.A. and Mo, X. (2002), "Testing procedures to assess the viability of dewatering with geotextile tubes", Geotext. Geomembr., 20(5), 289-303. https://doi.org/10.1016/S0266-1144(02)00028-6
  20. Parab, S.R., Chodankar, D.S., Shirgaunkar, R.M., Fernandes, M., Parab, A.B., Aldonkar, S.S. and Savoikar, P.P. (2011), "Geotubes for beach erosion control in Goa", Int. J. Earth Sci. Eng., 4, 1013-1016.
  21. Pilarczyk, K.W. (2008), "Alternatives for coastal protection", J. Water Resour. Environ. Eng., 23, 181-188.
  22. Plaut, R.H. and Klusman, C.R. (1999), "Two-dimensional analysis of stacked geosynthetic tubes on deformable foundations", Thin-Wall. Struct., 34(3), 179-194. https://doi.org/10.1016/S0263-8231(99)00011-7
  23. Plaut, R.H. and Suherman, S. (1998), "Two-dimensional analysis of geosynthetic tubes", Acta Mech., 129(3-4), 207-218. https://doi.org/10.1007/BF01176746
  24. Recio, J. and Oumeraci, H. (2009), "Processes affecting the hydraulic stability of coastal revetments made of geotextile sand containers", Coast. Eng., 56(3), 260-284. https://doi.org/10.1016/j.coastaleng.2008.09.006
  25. Restall, S.J., Jackson, L.A., Heerten, G. and Hornsey, W.P. (2002), "Case studies showing the growth and development of geotextile sand containers: An australian perspective", Geotext. Geomembr., 20(5), 321-342. https://doi.org/10.1016/S0266-1144(02)00030-4
  26. Weggel, J.R., Dortch, J. and Gaffney, D. (2011), "Analysis of fluid discharge from a hanging bag", Geotext. Geomembr., 29(1), 65-73. https://doi.org/10.1016/j.geotexmem.2010.06.011
  27. Vashi, J.M., Desai, A.K. and Solanki, C.H. (2013), "Behavior of geotextile reinforced flyash + clay-mix by laboratory evaluation", Geomech. Eng., 5(4), 331-342. https://doi.org/10.12989/gae.2013.5.4.331

피인용 문헌

  1. Design and consolidation analysis of geotextile tubes for the Saemangeum project in Korea vol.25, pp.5, 2018, https://doi.org/10.1680/jgein.18.00015
  2. Full-scale investigations into installation damage of nonwoven geotextiles vol.17, pp.1, 2015, https://doi.org/10.12989/gae.2019.17.1.081
  3. Compression behavior of cement-treated marine dredged clay in Dalian Bay vol.26, pp.4, 2021, https://doi.org/10.12989/gae.2021.26.4.345