DOI QR코드

DOI QR Code

Sulfide-rich mine tailings usage for short-term support purposes: An experimental study on paste backfill barricades

  • Komurlu, Eren (Karadeniz Technical University Mining Engineering Department) ;
  • Kesimal, Ayhan (Karadeniz Technical University Mining Engineering Department)
  • 투고 : 2014.06.20
  • 심사 : 2015.11.19
  • 발행 : 2015.08.25

초록

Barricade failures generally occur at the early times of paste backfill when it is fresh in the stopes. The backfill strength increases and need for barricading pressure decreases as a result of the hydration reactions. In this study, paste backfill barricades of Cayeli copper mine were investigated to design cemented mineral processing plant tailings as barricade body concrete. Paste backfill in sub-level caving stopes of the mine needs to be barricaded for only four or five days. Therefore, short term strength and workability tests were applied on several cemented tailings material designs. Barricade failure mechanisms, important points of barricade designing and details of the new concrete material are explained in this work. According to the results obtained with this experimental study, the tailings were assessed to be used in concrete applied as temporary supports such as cemented paste backfill barricades.

키워드

참고문헌

  1. Arioglu, E., Yuksel, A. and Yilmaz, A.O. (2008), Puskurtme bilgi foyleri ve cozumlu problemler, Chamber of mining engineers of Turkey, Istanbul. [In Turkish]
  2. Aubertin, M., Li, L., Arnoldi, S., Belem, T., Bussiere, B., Benzaazoua, M. and Simon, R. (2003), "Interaction between backfill and rock mass in narrow stopes", Soil and Rock America 2003: Proceedings of the 12th Panamerican Conference on Soil Mechanics and Geotechnical Engineering and 39th U.S. Rock Mechanics Symposium, Boston, MA, USA, June, pp. 1157-1164.
  3. Belem, T. and Benzaazoua, M. (2004), "An overview on the use of paste backfill technology as a ground support method in cut-and-fill mines", (Villaescusa & Potvin Eds.), Proceedings of the 5th International Symposium on Ground support in Mining and Underground Construction, Perth, Australia, September, pp. 637-650.
  4. Cakir, F. (2014), "Backfill and subsoil interaction effects on seismic behavior of a cantilever wall", Geomech. Eng., Int. J., 6(2), 117-138. https://doi.org/10.12989/gae.2014.6.2.117
  5. Cihangir, F. (2011), "Aktiflestirilmis Yuksek Firin Curufunun Macun Dolguda Baglayici Olarak Kullanilabilirliginin Arastirilmasi", Ph.D. Thesis; Karadeniz Teknik Universitesi, Trabzon, Turkey.
  6. Ercikdi, B. (2009), "Effect of pozzolanic mineral and chemical admixtures on paste backfill performance", Ph.D. Thesis; Karadeniz Technical University, Trabzon, Turkey. [In Turkish)
  7. Ercikdi, B., Baki, H. and Izki, M. (2013), "Effect of desliming of sulphide-rich mill tailings on the long-term strength of cemented paste backfill", J. Environ. Manag., 115, 5-13. https://doi.org/10.1016/j.jenvman.2012.11.014
  8. Galambos, T.V. (1998), Guide to Stability Design Criteria for Metal Structures, John Wiley & Sons, USA.
  9. Gercek, H. (2007), "Poisson's ratio values for rocks", Int. J. Rock Mech. Min. Sci., 44(1), 1-13. https://doi.org/10.1016/j.ijrmms.2006.04.011
  10. Ghazi, S. (2011), "Modeling of an undergound mine backfill barricade", M.Sc. Thesis; University of Toronto Civil Engineering Department, Toronto, ON, Canada.
  11. Ghirian, A. and Fall, M. (2013), "Coupled thermo-hydro-mechanical-chemical behaviour of cemented paste backfill in column experiments. Part I: Physical, hydraulic and thermal processes and characteristics", Eng. Geol., 164, 195-207. https://doi.org/10.1016/j.enggeo.2013.01.015
  12. Hoek, E. (2006), Kaya Muhendisligi (Turkish translation of "Rock Engineering"), Publication of The Chambers of Mining Engineers of Turkey, Ankara, Turkey.
  13. Hudson, J.A. and Harrison, J.P. (1997), Engineering Rock Mechanics: An Introduction to the Principles, Pergamon, Elsevier Science, Oxford.
  14. Hughes, P.B. (2008), "Performance of paste fill fences at red lake mine", M.Sc. Thesis; University of British Columbia, Vancouver, BC, Canada.
  15. ISRM (1978), "International society for rock mechanics. Suggested methods for determining tensile strength of rock materials", Int. J. Rock Mech. Min. Sci. Geomech. Abstract, 15, 99-103. https://doi.org/10.1016/0148-9062(78)90003-7
  16. Karaoglu, K., Kucukates, K. and Thompson, B.D. (2011), "Pastefill pressure monitoring at inmet's cayeli underground copper and zinc mine", (Eskikaya S. Editor), Proceedings of the 22th World Mining Congress & Expo., Istanbul, Turkey, September, pp. 325-334.
  17. Kesimal, A., Yilmaz, E. and Ercikdi, B. (2004), "Evaluation of paste backfill mixtures consisting of sulphide-rich mill tailings and varying cement contents", Cement Concrete Res., 34(10), 1817-1822. https://doi.org/10.1016/j.cemconres.2004.01.018
  18. Kolymbas, D. (2005), Tunnelling and Tunnel Mechanics: A Rational Approach for Tunnelling, Springer, Berlin, Germany.
  19. Komurlu, E. (2012), "Effects of rock and granular material horizontal stresses on support design" (in Turkish), M.Sc. Thesis; Karadeniz Technical University, Trabzon, Turkey.
  20. Komurlu, E. and Kesimal, A. (2011), "Polymer fibre addition's effects for shotcrete tunnel support", Proceedings of the 10th Regional Rock Mechanics Symposium, Turkish National Society for Rock Mechanics, Ankara, Turkey, December, pp. 53-62.
  21. Komurlu, E. and Kesimal, A. (2014), "Improved performance of rock bolts using sprayed polyurea coating", Rock Mech. Rock Eng., DOI: 10.1007/s00603-014-0696-4
  22. Komurlu, E. and Toptas, S. (2012), "Investigation about durability of steep excavated foundation in urban places", Min. Turkey Sci. J. Undergr. Resour., 1, 13-57.
  23. Komurlu, E., Kesimal, A. and Ercikdi, B. (2013), "An investigation on uncemented paste backfill applicability and consolidation effects on inaccuracy of paste backfill in situ strength estimation by laboratory tests", Proceedings of the 23rd International Mining Congress & Exhibition of Turkey, Antalya, Turkey, May, pp. 597-609.
  24. Komurlu, E., Kesimal, A. and Colak, U. (2014), "Polyurea type thin spray-on liner coating to prevent rock bolt corrosion", Proceedings of the 8th Asian Rock Mechanics Symposium, Sapporo, Japan, October, pp. 1389-1397.
  25. Li, L. and Aubertin, M. (2009a), "Horizontal pressure on barricades for backfilled stopes. Part I: Fully drained conditions", Can. Geotech. J., 46(1), 37-46. https://doi.org/10.1139/T08-104
  26. Li, L. and Aubertin, M. (2009b), "A three-dimensional analysis of the total and effective stresses in submerged backfilled stopes", Geotech. Geol. Eng., 27(4), 559-569. https://doi.org/10.1007/s10706-009-9257-0
  27. Mei, G., Lok, T.M.H., Xia, J. and Wu, S.S. (2014), "One-dimensional consolidation with asymmetrical exponential drainage boundary", Geomech. Eng., Int. J., 6(1), 47-63. https://doi.org/10.12989/gae.2014.6.1.047
  28. Orejarena, L. and Fall, M. (2011), "Strength development and sorptivity of tailings shotcrete under various thermal and chemical loads", Can. J. Civil Eng., 38(1), 100-109. https://doi.org/10.1139/L10-109
  29. Sinopoli, A. (1998), Arch Bridges: History Analysis Assesment Maintenance and Repair, AA Balkema, Rotterdam, Netherlands.
  30. Uzuner, B.A. (2007), Fundamentals of Soil Mechanics, Derya, Trabzon, Turkey. [In Turkish]
  31. Yilmaz, E., Kesimal, A. and Ercikdi, B. (2003), "Macun dolgu dayanimi ve durayliligini etkileyen faktorler", Yerbilimler Bulletin of Earth Sciences, 28, 155-169.
  32. Yumlu, M. (2001), "Backfill practices at Cayeli Mine", Proceedings of the 17th International Mining Congress and Exhibition of Turkey, Ankara, Turkey, June, pp. 333-339.
  33. Yumlu, M. (2008), "Barricade pressure monitoring in paste backfill", Min. Resour. Manag., 24, 233-244.

피인용 문헌

  1. Experimental evaluation of the active tension bolt vol.11, pp.2, 2016, https://doi.org/10.12989/gae.2016.11.2.177
  2. Experimental and numerical analyses on determination of indirect (splitting) tensile strength of cemented paste backfill materials under different loading apparatus vol.10, pp.6, 2016, https://doi.org/10.12989/gae.2016.10.6.775
  3. Total and Effective Stresses in Backfilled Stopes during the Fill Placement on a Pervious Base for Barricade Design vol.9, pp.1, 2019, https://doi.org/10.3390/min9010038
  4. Optimization study on roof break direction of gob-side entry retaining by roof break and filling in thick-layer soft rock layer vol.13, pp.2, 2017, https://doi.org/10.12989/gae.2017.13.2.195
  5. An analytical solution for estimating the stresses in vertical backfilled stopes based on a circular arc distribution vol.15, pp.3, 2015, https://doi.org/10.12989/gae.2018.15.3.889
  6. An alternative upstream method for the Zhelamuqing tailings impoundment construction of a Copper Mine in China vol.19, pp.5, 2019, https://doi.org/10.12989/gae.2019.19.5.383
  7. High-density polyurethane rigid foam usability as liner support material in rock engineering vol.13, pp.11, 2015, https://doi.org/10.1007/s12517-020-05396-6
  8. Experimental study of the evolution of pore water pressure and total stresses during and after the deposition of slurried backfill vol.26, pp.5, 2015, https://doi.org/10.12989/gae.2021.26.5.499