참고문헌
- Choi, D. H., Kang, D. H., Yeo, M. S., & Kim, K. W. (2010). The impact of a non-adhesive floating installation method on emissions and indoor concentrations of VOCs, Indoor and Built Environment, 19(4), 435-443. https://doi.org/10.1177/1420326X10372730
- Choi, D. H. (2010). Evaluation of the impact of adhesive -bonded materials on indoor air quality based on VOC emission modeling, Ph.D. Thesis, Seoul National University.
- Dunn, J. E. (1987). Models and statistical methods for gaseous emission testing of finite sources in well-mixed chambers, Atmospheric Environment, 21(2), 425-430. https://doi.org/10.1016/0004-6981(87)90022-9
- Jarnstom, H., Saarela, K.. & Pasanen, A. L. (2008). Comparison of VOC and ammonia emissions from individual PVC materials, adhesives and from complete structures, Environment International, 34, 420-427. https://doi.org/10.1016/j.envint.2007.09.011
- James, J. P. & Yang, X. (2005). Emissions of Volatile Organic Compounds from several green and non-green building materials: A comparison, Indoor Built and Environment, 14, 69-74. https://doi.org/10.1177/1420326X05050504
- Kang, D. H., Choi, D. H., Seong, Y. B., Yeo, M. S., & Kim, K. W. (2013). A numerical simulation of VOC emission and sorption behaviors of adhesive-bonded materials under floor heating condition, Building and Environment, 68, 193-201. https://doi.org/10.1016/j.buildenv.2013.06.013
- Kim, C. N., Lee, Y. G., Leigh, S. B., & Kim, T. Y. (2007). A prediction of indoor pollutant concentration using method mass transfer coefficient in double-layered building materials, Journal of the Korean Institute of Architectural Sustainable Environment and Building Systems, 1(2), 22-27.
- Kim, S. S., Kang, D. H., Choi, D. H., Yeo, M. S., & Kim, K. W. (2008). Comparison of strategies to improve indoor air quality at the pre-occupancy stage in new apartment buildings, Building and Environment, 43, 320-328. https://doi.org/10.1016/j.buildenv.2006.03.026
- Korea Ministry of Environment. (2005). Indoor air quality management act: revision.
- Kwon, K. W., Yoon C. H., & Park, J. S. (2007). Prediction of VOCs emission rate from multi-layers finishing by using effective diffusion coefficients of single materials, Journal of the Architectural Institute of Korea, Planning and Design Section, 23(7), 269-276.
- Little, J. C., Hodgson, A. T., & Gadgil, A. (1994). Modeling emissions of volatile organic compounds from new carpets, Atmospheric Environment, 28(2), 227-234. https://doi.org/10.1016/1352-2310(94)90097-3
- Low, J. M., Zhang, J. S., Plett, E. G., & Shaw, C. Y. (1998). Effects of airflow on emissions of volatile organic compounds from carpet adhesive assemblies, ASHRAE Transactions Part 2, 144, 1281-1283.
- WHO. (2000). Guidelines for Air Quality, Geneva.
- Yang, X., Chen, Q., Zhang, J. S., Magee, R., Zeng, J., & Shaw, C. Y. (2001). Numerical simulation of VOC emissions from dry materials, Building and Environment, 36, 1099-1107. https://doi.org/10.1016/S0360-1323(00)00078-0