Steel and Composite Structures

  • 제19권2호
  • /
  • Pages.417-439
  • /
  • 2015
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Low velocity impact behavior of shear deficient RC beam strengthened with CFRP strips

  • Anil, Ozgur (Department of Civil Engineering, Faculty of Engineering, Gazi University) ;
  • Yilmaz, Tolga (Department of Civil Engineering, Faculty of Engineering, Eskisehir Osmangazi University)
  • 투고 : 2014.04.15
  • 심사 : 2015.01.31
  • 발행 : 2015.08.25
⟨ 이전 논문 다음 논문 ⟩

초록

Many methods are developed for strengthening of reinforced concrete structural members against the effects of shear. One of the commonly used methods in recent years is turned out to be bonding of fiber reinforced polymers (FRP). Impact loading is one of the important external effects on the reinforced concrete structural members during service period among the others. The determination of magnitude, the excitation time, deformations and stress due to impact loadings are complicated and rarely known. In recent year impact behavior of reinforced concrete members have been researched with experimental studies by using drop-weight method and numerical simulations are done by using finite element method. However the studies on the strengthening of structural members against impact loading are very seldom in the literature. For this reason, in this study impact behavior of shear deficient reinforced concrete beams that are strengthened with carbon fiber reinforced polymers (CFRP) strips are investigated experimentally. Compressive strength of concrete, CFRP strips spacing and impact velocities are taken as the variables in this experimental study. The acceleration due to impact loading is measured from the specimens, while velocities and displacements are calculated from these measured accelerations. RC beams are modeled with ANSYS software. Experimental result and simulations result are compared. Experimental result showed that impact behaviors of shear deficient RC beams are positively affected from the strengthening with CFRP strip. The decrease in the spacing of CFRP strips reduced the acceleration, velocity and displacement values measured from the test specimens.

키워드

참고문헌

  1. ACI Committee 440 (2004), State-of-the-art Report on Fiber Reinforced Plastic (FRP) Reinforcement for Concrete Structures, American Concrete Institute; Detroit, MI, USA, 68 p.
  2. Anil, O. and Belgin, C. (2008), "Review of bond-strength models and application on CFRP to-concrete bonded joints across crack", Sci. Eng. Compos. Mater., 15(2), 141-158. https://doi.org/10.1515/SECM.2008.15.2.141
  3. Anil, O. and Belgin, C. (2010), "Anchorages effects on CFRP-to-concrete bond-strength", J. Reinf. Plast. Comp., 29(4), 539-557. https://doi.org/10.1177/0731684408100259
  4. Anil, O., Belgin, C. and Kara, M.E. (2010), "Experimental investigation on CFRP to concrete bonded joints across crack", Struct. Eng. Mech., Int. J., 35(1), 1-18. https://doi.org/10.12989/sem.2010.35.1.001
  5. Arslan, A. (1995), "Mixed-mode fracture performance of fibre reinforced concrete under impact loading", Mater. Struct., 28(8), 473-478. https://doi.org/10.1007/BF02473167
  6. Baran, A. and Anil, O. (2010), "Nonlinear finite element analysis of effective CFRP bonding length and strain distribution along concrete-CFRP interface", Comput. Concrete, Int. J., 7(5), 427-453.
  7. Badr, A., Ashour, A.F. and Platten, A.K. (2006), "Statistical variations in impact resistance of polypropylene fiber-reinforced concrete", Int. J. Impact Eng., 32(11), 1907-1920. https://doi.org/10.1016/j.ijimpeng.2005.05.003
  8. Banthia, N.P. (1987), "Impact resistance of concrete", Ph.D. Thesis; The University of British Columbia, Vancouver, BC, Canada.
  9. Barr, B. and Baghli, A. (1988), "A repeated drop-weight impact testing apparatus for concrete", Magazine Concrete Res., 40(144), 167-176. https://doi.org/10.1680/macr.1988.40.144.167
  10. Bhatti, A.Q., Kishi, N., Mikami, H. and Ando, T. (2009), "Elasto-plastic impact response analysis of shear-failure-type RC beams with shear rebars", Mater. Des., 30(3), 502-510. https://doi.org/10.1016/j.matdes.2008.05.068
  11. Bull, P.H. and Edgren, F. (2004), "Compressive strength after impact of CFRP-foam core sandwich panels in marine applications", Composites: Part B, 35(6-8), 535-541. https://doi.org/10.1016/j.compositesb.2003.11.007
  12. Erki, M.A. and Meier, U. (1999), "Impact loading of concrete beams externally strengthened with CFRP laminates", J. Compos. Construct., 3(3), 117-124. https://doi.org/10.1061/(ASCE)1090-0268(1999)3:3(117)
  13. Goldsmith, W. (1960), Impact: The Theory and Physical Behavior of Colliding Solids, Edward Arnold Limited, pp. 145-240.
  14. Kantar, E. (2009), "Experimental investigation of impact behavior of reinforced concrete beam strengthened with CFRP", Ph. D. Thesis; Gazi University, Civil Engineering Department, 241 p. [In Turkish]
  15. Kantar, E., Arslan, A. and Anil, O. (2011a), "Effect of concrete compression strength variation on impact behavior of concrete", J. Faculty Eng. Architect. Gazi Univ., 26(1), 115-123.
  16. Kantar, E., Erdem, T. and Anil, O. (2011b), "Nonlinear finite element analysis of impact behavior of concrete beam", Math. Comput. Appl., 16(1), 183-193.
  17. Kishi, N. and Bhatti, A.Q. (2010), "An equivalent fracture energy concept for nonlinear dynamic response analysis of prototype RC girdres subjected to falling-weight impact loading", Int. J. Impact Eng., 37(1), 103-113. https://doi.org/10.1016/j.ijimpeng.2009.07.007
  18. Kishi, N., Konno, H., Ikeda, K. and Matsuoka, K.G. (2002a), "Prototype impact tests on ultimate impact resistance of PC rock sheds", Int. J. Impact Eng., 27(9), 969-985. https://doi.org/10.1016/S0734-743X(02)00019-2
  19. Kishi, N., Mikami, H., Matsuoka, K.G. and Ando, T. (2002b), "Impact behavior of shear failure type RC beams without shear rebar", Int. J. Impact Eng., 27(9), 955-968. https://doi.org/10.1016/S0734-743X(01)00149-X
  20. Krauthammer, T. (1998), "Blast mitigation technologies: Developments and numerical considerations for behavior assessment and design", In: Structures under shock and impact V, Computational Mechanics Publications, pp. 1-12.
  21. Marar, K., Celik, T. and Eren, O. (2001), "Relationship between impact energy and compression toughness energy of high-strength fiber reinforced concrete", Mater. Lett., 47, 297-304. https://doi.org/10.1016/S0167-577X(00)00253-6
  22. Mindess, S. and Cheng, Y. (1993), "Perforation of plain and fiber reinforced concretes subjected to low-velocity impact loading", Cement Concrete Res., 23(1), 83-92. https://doi.org/10.1016/0008-8846(93)90138-Y
  23. Murtiadi, S. (1999), "Behavior of high-strength concrete plates under impact loading", Master Thesis; Faculty of Engineering and Applied Science, Mernorial University of Newfoundland, St. John's, NL, USA.
  24. Muszynski, L.C. (1998), "Explosive field test to evaluate composite reinforcement of concrete and masonry walls", Proceedings of the 2nd International Conference on Composites in Infrastructure ICCI'98, (Edited by H. Saadatmanesh and M.R. Ehsani), Tucson, AZ, USA, January, pp. 276-284.
  25. Nataraja, M.C., Nagaraj, T.S. and Basavaraja, S.B. (2005), "Reproportioning of steel fiber reinforced concrete mixes and their impact resistance", Cement and Concrete Res., 35, 2350-2359. https://doi.org/10.1016/j.cemconres.2005.06.011
  26. Nagaraj, T.S., Shashiprakash, S.G. and Raghuprasad, B.K. (1993), "Reproportioning concrete mixes", ACI Mater. J., 90(1), 50-58.
  27. Ong, K.C.G., Basheerkhan, M. and Paramasivam, P. (1999), "Resistance of fiber concrete slabs to low velocity projectile impact", Cement Concrete Compos., 21(5-6), 391-401. https://doi.org/10.1016/S0958-9465(99)00024-4
  28. Selvi, M. (2008), "Effect of concrete strength variation on the impact behavior", Master of Science Thesis; Gazi University, Civil Engineering Department, 103 p. [In Turkish]
  29. Siewert, T.A., Manahan, M.P., McCowan, M.P., Holt, J.M., Marsh, F.J. and Ruth, E.A. (1999), "The history and importance of impact testing", American Society for Testing and Materials (ASTM), 3-16.
  30. Tang, T. (2002), "Behavior of concrete beams retrofitted with composite laminates under impact loading", Ph.D. Thesis; University of Arizona, Tucson, AZ, USA.
  31. Valipour, H.R., Huynh, L. and Foster, S.J. (2009), "Analysis of RC beams subjected to shock loading using a modified fibre element formulation", Comput. Concrete, Int. J., 6(5), 377-390. https://doi.org/10.12989/cac.2009.6.5.377

피인용 문헌

  1. An investigation of anchorage to the edge of steel plates bonded to RC structures vol.22, pp.1, 2016, https://doi.org/10.12989/scs.2016.22.1.025
  2. Experimental and numerical investigation of reinforced concrete beams with variable material properties under impact loading vol.125, 2016, https://doi.org/10.1016/j.conbuildmat.2016.08.028
  3. Impact resistance of deflection-hardening fiber reinforced concretes with different mixture parameters pp.14644177, 2019, https://doi.org/10.1002/suco.201800233
  4. Experimental investigation of axially loaded reinforced concrete square column subjected to lateral low‐velocity impact loading vol.20, pp.4, 2015, https://doi.org/10.1002/suco.201800276
  5. Experimental Investigation of Impact Behaviour of RC Slab with Different Reinforcement Ratios vol.24, pp.1, 2015, https://doi.org/10.1007/s12205-020-1168-x
  6. Low-Velocity Impact Load Testing of RC Beams Strengthened in Flexure with Bonded FRP Sheets vol.24, pp.5, 2015, https://doi.org/10.1061/(asce)cc.1943-5614.0001048
  7. Investigation of impact behavior of reinforced concrete beam to column connection strengthened with carbon fiber‐reinforced polymer strips vol.22, pp.4, 2021, https://doi.org/10.1002/suco.202000571
  8. Numerical evaluation of effects of shear span, stirrup spacing and angle of stirrup on reinforced concrete beam behaviour vol.79, pp.3, 2021, https://doi.org/10.12989/sem.2021.79.3.309
  9. Experimental investigation on low-velocity impact behavior of CFRP wraps in presence of concrete substrate vol.301, pp.None, 2015, https://doi.org/10.1016/j.conbuildmat.2021.124103