DOI QR코드

DOI QR Code

Layout evaluation of building outrigger truss by using material topology optimization

  • Lee, Dongkyu (Department of Architectural Engineering, Sejong University) ;
  • Shin, Soomi (Research Institute of Industrial Technology, Pusan National University) ;
  • Lee, Jaehong (Department of Architectural Engineering, Sejong University) ;
  • Lee, Kihak (Department of Architectural Engineering, Sejong University)
  • 투고 : 2014.10.31
  • 심사 : 2015.03.23
  • 발행 : 2015.08.25

초록

This study presents conceptual information of newly optimized shapes and connectivity of the so-called outrigger truss system for modern tall buildings that resists lateral loads induced by wind and earthquake forces. In practice, the outrigger truss consists of triangular or Vierendeel types to stiffen tall buildings, and the decision of outrigger design has been qualitatively achieved by only engineers' experience and intuition, including information of structural behaviors, although outrigger shapes and the member's connectivity absolutely affect building stiffness, the input of material, construction ability and so on. Therefore the design of outrigger trusses needs to be measured and determined according to scientific proofs like reliable optimal design tools. In this study, at first the shape and connectivity of an outrigger truss system are visually evaluated by using a conceptual design tool of the classical topology optimization method, and then are quantitatively investigated with respect to a structural safety as stiffness, an economical aspect as material quantity, and construction characteristics as the number of member connection. Numerical applications are studied to verify the effectiveness of the proposed design process to generate a new shape and connectivity of the outrigger for both static and dynamic responses.

키워드

참고문헌

  1. Ali, M. and Armstrong, P. (1995), Architecture of Tall Buildings, Council on Tall Buildings and Urban Habitat Committee, McGraw-Hill, New York, NY, USA.
  2. Ali, M. and Moon, K.S. (2007), "Structural Developments of Tall Buildings: Current Trends and Future Prospects", Architect. Sci. Rev., 50(3), 205-223. https://doi.org/10.3763/asre.2007.5027
  3. Ambrose, J.E. (1993), Building Structures, John Wiley and Sons.
  4. Bendsoe, M.P. (1995), Optimization of Structural Topology, Shape, Material, Berlin, Heidelberg, New York, Springer.
  5. Bendsoe, M.P. and Kikuchi, N. (1988), "Generating optimal topologies in optimal design using a Homogenization Method", Comput. Methods Appl. Mech. Eng., 71(2), 197-224. https://doi.org/10.1016/0045-7825(88)90086-2
  6. Bogomolny, M. (2010), "Topology optimization for free vibrations using combined approximations", Int. J. Numer. Method. Eng., 82(5), 617-636. https://doi.org/10.1002/nme.2778
  7. Bunnell, T. (1999), "View from above and below: The petronas twin towers and/in contesting visions of development in contemporary Malaysia", Singapore J. Trop. Geo., 20(1), 1-23. https://doi.org/10.1111/1467-9493.00040
  8. Chung, K.R. (2002), "Application of new structural system in domestic highrise residential buildings", J. Architect. Inst. Korea, 46(6), 64-66.
  9. Chung, K.R., Scott, D., Kim, D.H., Ha, I.H. and Park, K.D. (2008), "Structural system of North-East Asia Trade Tower in Korea", Proceedings of Council on Tall Buildings and Urban Habitat 8th World Congress, Dubai, UAE, March, pp. 1-8.
  10. Du, J. and Olhoff, N. (2007), "Topological design of freely vibrating continuum structures for maximum values of simple and multiple eigenfrequencies and frequency gaps", Struct. Multidiscipl. Optim., 34(2), 91-110. https://doi.org/10.1007/s00158-007-0101-y
  11. Eschenauer, H.A. and Olhoff, N. (2001), "Topology optimization of continuum structures - A review", Appl. Mech. Rev., 54(4), 331-390. https://doi.org/10.1115/1.1388075
  12. Fatima, T., Fawzia, S. and Nasir, A. (2011), "Study of the effectiveness of outrigger system for high-rise composite buildings for cyclonic region", Proceedings of ICECECE 2011: International Conference on Electrical, Computer, Electronics and Communication Engineering, Venice, Italy, November, pp.937-945.
  13. Gunel, H.M. and Ilgin, E.H. (2007), "A proposal for the classification of structural system of tall buildings", Build. Environ., 42(7), 2667-2675. https://doi.org/10.1016/j.buildenv.2006.07.007
  14. Huang, X., Zuo, Z.H. and Xie, Y.M. (2010), "Evolutionary topological optimization of vibrating continuum structures for natural frequencies", Comput. Struct., 88(5-6), 357-364. https://doi.org/10.1016/j.compstruc.2009.11.011
  15. Jahanshahi, M.R. and Rahgozar, R. (2013), "Optimum location of outrigger-belt truss in tall buildings based on maximization of the belt truss strain energy", Int. J. Eng., 26(7), 693-700.
  16. Lee, D.K. and Shin, S.M. (2014c), "Advanced high strength steel tube diagrid using TRIZ and nonlinear pushover analysis", J. Construct. Steel Res., 96, 151-158. https://doi.org/10.1016/j.jcsr.2014.01.005
  17. Lee, D.K., Starossek, U. and Shin, S.M. (2010), "Optimized topology extraction of steel-framed diagrid structure for tall buildings", Int. J. Steel Struct., 10(2), 157-164. https://doi.org/10.1007/BF03215827
  18. Lee, D.K., Ha, T.H., Jung, M.Y. and Kim, J.H. (2014a-d), "Evaluating high performance steel tube-framed diagrid for high-rise buildings", Steel Compos. Struct., Int. J., 16(3), 289-303. https://doi.org/10.12989/scs.2014.16.3.289
  19. Lee, D.K., Lee, J.H. and Ahn, N.S. (2014b), "Generation of structural layout in use for '0-1' material considering n-order eignefrequency dependence", Mater. Res. Innov., 18(S2), 833-839.
  20. Lee, D.K. Lee, J.H., Lee, K.H. and Ahn, N.S. (2014c-a), "Evaluating Topological Optimized Layout of Building Structures by using Nodal Material Density Based Bilinear Interpolation", J. Asian Architect. Build. Eng., 13(2), 421-428. https://doi.org/10.3130/jaabe.13.421
  21. Pedersen, N.L. (2000), "Maximization of eigenvalues using topology optimization", Struct. Multidisc. Optim. 20(1), 2-11. https://doi.org/10.1007/s001580050130
  22. Sigmund, O. (1997), "On the design of compliant mechanisms using topology optimization", Mech. Struct. Mach., 25(4), 493-524. https://doi.org/10.1080/08905459708945415
  23. Sigmund, O. (2001), "A 99 topology optimization code written in Matlab", Struct. Multidisc. Optim., 21(2), 120-127. https://doi.org/10.1007/s001580050176
  24. Stafford Smith, B., Curvellier, M., Nollet, M-J. and Mahyari, A.T. (1996), "Offset outrigger concept for tall buildings", Tall Building Structures - A World View, Council on Tall Buildings and Urban Habitat, pp. 73-80.
  25. Stromberg, L.L., Beghini, A., Baker, W.F. and Paulino, G.H. (2012), "Topology optimization for braced frames: Combining continuum and beam/column elements", Eng. Struct., 37, 106-124. https://doi.org/10.1016/j.engstruct.2011.12.034
  26. Taranath, B. (1998), Steel, Concrete & Composite Design of Tall Buildings, McGraw Hill, New York, NY, USA.
  27. Underwood, J.R. and Chiuini, M. (1998), Structural Design: A Practical Guide for Architects, John Wiley and Sons.

피인용 문헌

  1. Seismic analysis of steel structure with brace configuration using topology optimization vol.21, pp.3, 2016, https://doi.org/10.12989/scs.2016.21.3.501
  2. Additive 2D and 3D performance ratio analysis for steel outrigger alternative design vol.20, pp.5, 2016, https://doi.org/10.12989/scs.2016.20.5.1133
  3. Optimizing structural topology patterns using regularization of Heaviside function vol.55, pp.6, 2015, https://doi.org/10.12989/sem.2015.55.6.1157
  4. Optimum topology design of multi-material structures with non-spurious buckling constraints vol.114, 2017, https://doi.org/10.1016/j.advengsoft.2017.06.002
  5. Design and construction innovations on a skyscraper cluster in China vol.171, pp.2, 2018, https://doi.org/10.1680/jcien.17.00027
  6. Conceptual configuration and seismic performance of high-rise steel braced frame vol.23, pp.2, 2015, https://doi.org/10.12989/scs.2017.23.2.173
  7. Experimental studies into a new type of hybrid outrigger system with metal dampers vol.64, pp.2, 2017, https://doi.org/10.12989/sem.2017.64.2.183
  8. Topology optimization for thin plate on elastic foundations by using multi-material vol.27, pp.2, 2018, https://doi.org/10.12989/scs.2018.27.2.177
  9. Topology optimization of steel plate shear walls in the moment frames vol.29, pp.6, 2015, https://doi.org/10.12989/scs.2018.29.6.771
  10. Design of buckling constrained multiphase material structures using continuum topology optimization vol.54, pp.8, 2015, https://doi.org/10.1007/s11012-019-01009-z
  11. Studies on damped hybrid outrigger systems of composite walls and steel bracings vol.172, pp.7, 2015, https://doi.org/10.1680/jstbu.17.00047
  12. A robust multi-objective localized outrigger layout assessment model under variable connecting control node and space deposition vol.33, pp.6, 2015, https://doi.org/10.12989/scs.2019.33.6.767
  13. Outrigger and Belt-Truss System Design for High-Rise Buildings: A Comprehensive Review Part II-Guideline for Optimum Topology and Size Design vol.2020, pp.None, 2020, https://doi.org/10.1155/2020/2589735