The Transactions of the Korean Institute of Power Electronics (전력전자학회논문지)

The Korean Institute of Power Electronics (전력전자학회)
권호 표지
DOI QR코드

DOI QR Code

Universal Single-Phase Line Compatible High Power AC/DC Converter

단상 AC Line 호환형 대용량 전원 장치 구현 방안

  • Received : 2014.11.19
  • Accepted : 2015.05.06
  • Published : 2015.08.20
Download PDF
⟨ Previous Next ⟩

Abstract

A conventional single-phase high-power system typically generates a large AC line input current at universal 90 VAC condition. Sometimes, this phenomenon can block the Earth Leakage Circuit Breaker (ELCB), which causes problems. Replacing power facilities is essential to ensure smooth operations. Thus, this paper proposes a method that can drive higher power than the limit of conventional power facilities. The proposed method can reduce the large AC line input current by limiting the input power of Power Factor Correction (PFC). An additional battery circuit can supplement the power deficiency. Specifically, a bidirectional converter with charging and discharging functions was adopted for the battery circuit. Finally, the validity of the proposed system could be confirmed by modal analysis and simulation, and an experiment in 2 KW condition was implemented with a prototype sample as well.

Keywords

References

  1. M. Madigan, R. Erickson, and E. Ismail, "Integrated high quality rectifier-regulator," in Proc. IEEE Power Electronics Specialists Conf., pp. 1043-1051, 1992.
  2. R. Martinez and P. N. Enjeti, "A high-performance single-phase rectifier with input power factor correction," IEEE Trans. Power Electron, Vol. 11, No. 2, pp. 311-317, Mar. 1996. https://doi.org/10.1109/63.486181
  3. K. D. Gusseme, D. Van de Sype, A. Van den Bossche, and J. Melkebeek, "Input-current distortion of CCM boost PFC converters operated in DCM," IEEE Trans. Industrial Electron, Vol. 54, No. 2, pp. 858-865, Apr. 2007. https://doi.org/10.1109/TIE.2007.892252
  4. C. Todd, "UC3854 Controlled power factor correction circuit design", Application Note U-134, Texas Instruments.
  5. R. W. Erickson and D. Maksimovic, Fundamentals of Power Electronics, Second Edition, Kluwer Academic Publishers, pp. 484-516, 2000.
  6. L. Balogh, "UC3854A/B provide power limiting with sinusoidal input current for PFC front ends," Unitrode Degisn Note DN-66, Texas Instruments, Nov. 2001.
  7. Y. M. Lee, B. S. Kim, and C. W. Roh, "Boosting two-way about battery charge and discharge circuit," 2014 KIPE Power Electronics Annual Conference, pp. 423-424, July 2014.
  8. T. J. Liang and K. C. Tseng, "Analysis of integrated boost-flyback step-up converter," IEEE Proc. Electr. Power Applications, Vol. 152, No. 2, pp. 217-225, Mar. 2005. https://doi.org/10.1049/ip-epa:20045003
  9. L. S. Yang and T. J. Liang, "Analysis and implementation of a novel bidirectional dc-dc converter," IEEE Trans. Industrial Electron, Vol. 59, No. 1, pp. 422-434, Jan. 2012. https://doi.org/10.1109/TIE.2011.2134060
  10. R. K. Singh, "A magnetically coupled feedback-clamped optimal bidirectional battery charger," IEEE Trans. Industrial Electron, Vol. 60, No. 2, pp. 422-432, Feb. 2013. https://doi.org/10.1109/TIE.2012.2186776
  11. J. Cao and A. Emadi, "A new battery/ultracapacitor hybrid energy storage system for electric, hybrid, and plug-in hybrid electric vehicles," IEEE Trans. Power Electron, Vol. 27, No. 1, pp. 122-132, Jan. 2012. https://doi.org/10.1109/TPEL.2011.2151206