한국지반환경공학회 논문집 (Journal of the Korean GEO-environmental Society)

  • 제16권9호
  • /
  • Pages.23-32
  • /
  • 2015
  • /
  • 1598-0820(pISSN)
  • /
  • 2714-1233(eISSN)
한국지반환경공학회 (Korean Geo-Environmental Society)
권호 표지
DOI QR코드

DOI QR Code

시험발파 계측자료 분석을 통한 암석 발파진동 특성 분석

Analysis on the Characteristics of Rock Blasting-induced Vibration Based on the Analysis of Test Blasting Measurement Data

  • Son, Moorak (Department of Civil Engineering, Daegu University) ;
  • Ryu, Jaeha (Expressway Design Evaluation Division, Korea Expressway Corporation) ;
  • Ahn, Sungsoo (Expressway Design Evaluation Division, Korea Expressway Corporation) ;
  • Hwang, Youngcheol (Department of Civil Engineering, Sanji University) ;
  • Park, Duhee (Department of Civil and Environmental Engineering, Hanyang University) ;
  • Moon, Duhyeong (Yongma Engineering)
  • 투고 : 2015.06.15
  • 심사 : 2015.08.03
  • 발행 : 2015.09.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 논문에서는 암석발파 유발 진동에 대한 포괄적인 추세특성을 파악하기 위하여 국내 97개의 현장에서 계측된 시험발파진동에 관한 자료를 이용하여 굴착종류(터널, 벤치굴착) 및 암석종류별로 발파진동의 특성을 조사 및 검토하였다. 계측된 자료는 주로 강원도 및 경상도 지역의 시험발파 현장으로부터 획득하였으며, 계측현장 자료의 암석종류는 화강암이 제일 많았으며 그다음으로 편마암, 석회암, 사암, 셰일 순으로 나타났다. 본 연구를 통한 분석 결과, 발파진동 속도는 굴착종류(터널, 벤치)에 따라 영향을 받는 것으로 나타났으며, 터널발파에 비하여 벤치발파에 의한 진동속도가 더 크게 발생하는 것으로 나타났다. 또한 발파진동은 암석종류에 따라 크게 영향을 받는 것으로 나타나 향후 암석종류를 포함한 발파진동 추정식 관리가 필요할 것으로 나타났다. 이와 더불어 본 연구를 통해 얻어진 결과와 기존의 국내 발파진동 추정식에 의한 결과들과 상호 비교하였으며, 비교결과 터널발파에서 자승근식을 이용한 결과를 제외하곤 큰 차이가 나타나 향후 암반에서의 발파진동 추정과 관련하여 암석의 강도 및 절리특성, 지층분포, 굴착종류, 사용화약, 계측장비 및 방법 등의 영향을 종합적으로 반영한 더욱더 많은 연구 및 관심이 필요할 것으로 판단된다.

This study examined blast testing measurement data which had been obtained from 97 field sites in Korea to investigate the comprehensive characteristics of rock blasting-induced vibration focusing on the effect of excavation types (tunnel, bench) and rock types. The measurement data was from the testing sites mostly in Kangwon province and Kyungsang province and rock types were granite, gneiss, limestone, sand stone, and shale in the order of number of data. The study indicated that the blasting-induced vibration velocity was affected by the excavation types (tunnel, bench) and bench blasting induced higher velocity than tunnel blasting. In addition, the vibration velocity was also highly affected by the rock types and therefore, it can be concluded that rock types should be considered in the future to estimate a blasting-induced vibration velocity. Furthermore, the pre-existing criteria was compared with the results of this study and the comparison indicated that there was a discernable difference except for tunnel blasting results based on the square root scaling and therefore, further studies and interests, which include the effects of rock strength, joint characteristics, geological formation, excavation type, power type, measurement equipment and method, might be necessarily in relation to the estimation of blasting-induced vibration velocity in rock mass.

키워드

참고문헌

  1. Adhikaria, G. R., Theresraja, A. I., Venkatesha, H. S., Balachxandera, R. and Guptaa, R. N. (2004), Ground vibration due to blasting in limestone quarries, International Journal for Blasting and Fragmentation, Vol. 8, Issue 2, pp. 85-94.
  2. Ambraseys, N. R. and Hendron, A. J. (1968), Dynamic behaviour of rock masses, Rock mechanics in engineering, practices, London, Wiley, pp. 203-207.
  3. Chun, B. S. and Oh, M. Y. (1995), A study on the estimation of blast vibration velocity using R.Q.D, Journal of Korean Society of Mineral and Energy Resources Engineers, Vol. 15, No. 4, pp. 983-990 (in Korean).
  4. Dowding, C. H. (1985), Blast vibration monitoring and control, Prentice-Hall, INC, Englewood Cliffs, NJ, pp. 28-30.
  5. Duvall, W. I. and Devine, J. F. (1968), Avoiding damages by air blasts and ground vibrations from blasting, Surface Mining, AIMMPE Inc, NY., pp. 398-412.
  6. Duvall, W. I. and Fogelson, D. E. (1962), Review of criteria for estimating damages to residences from blasting vibrations, R.I. 5968, USBM., pp. 1-15.
  7. Khandelwal, M. and Singh, T.N. (2009), Prediction of blastinduced ground vibration using artificial neural network, IJRMMS, Vol. 46, Issue 7, pp. 1214-1222.
  8. Kim, D. S., Lee, C. I. and Lee, H. K. (1991), A study on velocity and spectral analysis for the allowable peak particle velocity of blast vibration, Journal of The Korean Society of Mineral and Energy Resources Engineers, Vol. 28, No. 6, pp. 444-455 (in Korean).
  9. Kim, S. I., Jung, S. S. and Cho, H. Y. (1994), The reliability of blast vibration equation, Journal of Korean Society of Mineral and Energy Resources Engineers, Vol. 14, No. 3, pp. 573-582 (in Korean).
  10. Langefors, Ulf., Kihlstrom, B. and Westerberguvall, H. (1958), Ground vibrations in blasting, Water Power, February, pp. 335-424.
  11. Lee, K. W., Kim, M. K. and Shin, H. S. (1984), A study on the effects of explosives, rock strength, and blasting types on the blasting vibrations, The Korean Society of Mineral and Energy Resources Engineers, Vol. 21, No. 4, pp. 334-339 (in Korean).
  12. Lim, H. W. and Kim, J. D. (1992), On the magnitude and frequency characterization of blast - induced vibration, Journal of the Korean Society of Mineral and Energy Resources Engineers, Vol. 29, No. 3, pp. 146-157 (in Korean).
  13. Ministry of Construction and Transportation (MCT) (2003), Provisional guidelines for rock blasting design and test blasting, Ministry of Construction and Transportation, pp. 1-21.
  14. Ministry of Construction and Transportation (MCT) (2006), Final repot of guidelines for rock blasting design, Ministry of Construction and Transportation, pp. 47-72.
  15. Nicholls, H. R., Johnson, C. F. and Duvall, W. I. (1971), Blasting vibrations and their effects on structures, Bulletin 656, U.S.B.M., pp. 1-73.
  16. Roy, P. P. (1993), Putting ground vibration predictors into practice, J. Colliery, Guardian, Vol. 241, pp. 63-67.
  17. Seoul Metropolitan Rapid Transit Corporation (1984), Research report for establishing blating-induced vibration formula and determining guidelines for controlled blasting, Seoul Metropolitan Rapid Transit Corporation, pp. 1-168.
  18. Singh, T. N. (2004), Artificial neural network approach for prediction and control of ground vibrations in mines, Min. Technol, Sec. A, Vol. 113, Issue 4, pp. 251-256. https://doi.org/10.1179/037178404225006137
  19. Yang, H. S. and Ju, J. S. (1990), On the vibration characteristics and determination of site constants for surface blasting, Journal of Korean Society of Mineral and Energy Resources Engineers, Vol. 27, No. 4, pp. 316-323 (in Korean).