References
- Meher-Homji, C. B., 2000, "Compressor fouling...causes and solutions," Global Gas Turbine World, Vol. 40, No. 3, pp. 4-9.
- Stephenson, D. J., Nicholls, J. R. and Hancock, P., 1985, "The erosion of gas turbine blade materials by solid sea salt," Corrosion Science, Vol. 25, No. 12, pp. 1181-1192. https://doi.org/10.1016/0010-938X(85)90061-7
- 서진석․손정락․김재환․김동섭․노승탁, 2003, "막오염에 의한 압축기 성능 저하가 발전용 가스터빈 설계점 성능에 미치는 영향에 관한 영향," 유체기계저널, 제6권, 제3호, pp. 36-43.
- Rodriguez, C., Sanchez, D., Chacartegui, R., Munoz, A. and Martinez, G. S., 2013, "Compressor fouling: A Comparison of different Fault Distributions using a "stage-stacking" Technique," ASME paper GT2013-94010.
- Uyioghosa, I., Pericles, P., Dimitrios, F., Kenneth, P. and Panagiotis, L., 2014, "Industrial Gas Turbine Performance : Compressor Fouling and On-Line Washing," Journal of Turbomachinery, Vol. 136, pp. 101001-1-13. https://doi.org/10.1115/1.4027747
- Shin, H. D., Kang, D. W., Kim, T. S., Choi, M. K. and Park, P. J., 2012, "Design parameter sensitivity analysis of a 200kW class micro gas turbine system," Journal of Fluid Machinery, Vol. 15, No. 6, pp. 39-45.
- Nikpey, H., Assadi, M. and Breuhaus, P., 2013, "Development of an optimized artificial neural network model for combined heat and power micro gas turbines," Applied Energy, Vol. 108, pp. 137-148. https://doi.org/10.1016/j.apenergy.2013.03.016
- Suranat, W., Hiroshi, I., Motohiro, S. and Hideo, Y., 2013, "Performance evaluation of a direct-biogas solid oxide fuel cell-micro gas turbine (SOFC-MGT) hybrid combined heat and power (CHP) system," Journal of Power Sources, Vol. 223, pp. 9-17. https://doi.org/10.1016/j.jpowsour.2012.09.037
- 박진형, 2011, "200 kW급 마이크로 가스터빈 열병합발전 시스템 상용화," 2011 유체기계학회 연구개발 발표회 논문집, pp. 491-494.
- Kim, J. H., Kang, D. W., and Kim, T. S., 2013, "Analysis of Operating Characteristics of 200 kW Class Micro Gas Turbine," Trans. Korean Soc. Mech. Eng. B, Vol. 37, No. 11, pp. 1015-1022. https://doi.org/10.3795/KSME-B.2013.37.11.1015
- Huadong, Y. and Hong, X., 2014, "The new performance calculation method of fouled axial flow compressor," The Scientific World Journal, Vol. 2014, pp. 1-10.
- 김정호․강도원․김동섭, 2015, "마이크로 가스터빈 설계 및 운전 성능 분석 : 제1부 - 마이크로 가스터빈 성능해석프로그램 구축," 유체기계저널, 제18권, 제4호, pp. 22-29.
- Hwang, S. H., and Kim, T. S., 2004, "Performance Characteristics for Off-design Operation of Micro Gas Turbines," Journal of Fluid Machinery, Vol. 7, No. 3, pp. 39-47. https://doi.org/10.5293/KFMA.2004.7.3.039
- Tarabrin, A. P., Schurovsky, V. A., Bodrov, A. I. and Stalder, J-P., 1998, "Influence of axial compressor fouling on gas turbine unit performance based on different schemes and with different initial parameters," ASME paper 98-GT-416.
Cited by
- 2015년 가스·스팀터빈 분야 연구동향 vol.19, pp.2, 2016, https://doi.org/10.5293/kfma.2016.19.2.063