DOI QR코드

DOI QR Code

Design of integral abutment bridges for combined thermal and seismic loads

  • Received : 2014.08.31
  • Accepted : 2015.01.16
  • Published : 2015.08.25

Abstract

Integral abutment bridges have many advantages over bridges with expansion joints in terms of economy and maintenance costs. However, in the design of abutments of integral bridges temperature loads play a crucial role. In addition, seismic loads are readily transferred to the substructure and affect the design of these components significantly. Currently, the European and American bridge design codes consider these two load cases separately in their recommended design load combinations. In this paper, the importance and necessity of combining the thermal and seismic loads is investigated for integral bridges. A 2D finite element combined pile-soil-structure interactive model is used in this evaluation. Nonlinear behavior is assumed for near field soil behind the abutments. The soil around the piles is modeled by nonlinear springs based on p-y curves. The uniform temperature changes occurring at the time of some significant earthquakes around the world are gathered and applied simultaneously with the corresponding earthquake time history ground motions. By comparing the results of these analyses to prescribed AASHTO LRFD load combinations it is observed that pile forces and abutment stresses are affected by this new load combination. This effect is more severe for contraction mode which is caused by negative uniform temperature changes.

Keywords

References

  1. Bridge Design Specifications (2007), AASHTO LRFD, American Association of State Highway and Transportation Officials, AASHTO LRFD Bridge Design Specifications, Washington, DC.
  2. Bridge Design Specifications (2010), AASHTO LRFD, American Association of State Highway and Transportation Officials, AASHTO LRFD Bridge Design Specifications, Washington, DC.
  3. Comite Europeen de Normalisation (CEN) (2008), Eurocode 8: Design of structures for earthquake resistance, Part 2: Bridges.
  4. Dicleli, M. and Albhaisi, S.M. (2004), "Effect of cyclic thermal loading on the performance of steel H-piles in integral bridges with stub-abutments", J. Constr. Steel Res., 60(2), 161-182. https://doi.org/10.1016/j.jcsr.2003.09.003
  5. Duncan, J.M. and Arsoy, S. (2003), "Effect of bridge-soil interactions on behavior of piles supporting integral bridges", Trans. Res. Rec., 1849, 91-97. https://doi.org/10.3141/1849-11
  6. Fennema, J.L., Lama, J.A. and Linzell, D.G. (2005), "Predicted and measured response of on integral abutment bridge", J. Bridge Eng., ASCE, 10(6), 666-677. https://doi.org/10.1061/(ASCE)1084-0702(2005)10:6(666)
  7. Frosch, R.J., Kreger, M.E. and Talbott, A.M. (2009), Earthquake Resistance of Integral Abutment Bridges, Publication FHWA/IN/JTRP-2008/11. Joint Transportation Research Program, Indiana Department of Transportation and Purdue University, West Lafayette, India.
  8. Itani, A. and Pekcan, G. (2011), Seismic Performance of Steel Plate Girder Bridges with Integral Abutments, Publication No. FHWA-HIF-11-043.
  9. Kim, W. and Laman, J.A. (2010), "Integral abutment bridge response under thermal loading", Eng. Struct., 32(6), 1495-1508. https://doi.org/10.1016/j.engstruct.2010.01.004
  10. Kim, W. and Laman, J.A. (2010), "Numerical analysis method for long-term behavior of integral abutment bridges", Eng. Struct., 32(8), 2247-2257. https://doi.org/10.1016/j.engstruct.2010.03.027
  11. Kim, W. and Laman, J.A. (2013), "Integral abutment bridge behavior under uncertain thermal and time-dependent load", Struct. Eng. Mech., 46 (1), 53-73. https://doi.org/10.12989/sem.2013.46.1.053
  12. Kim, W., Laman, J.A. and Park, J.Y. (2014), "Reliability-based design of prestressed concrete girders in integral Abutment Bridges for thermal effects", Struct. Eng. Mech., 50(3), 305-322. https://doi.org/10.12989/sem.2014.50.3.305
  13. Maleki, S. and Mahjoubi, S. (2010), "A new approach for estimating the seismic soil pressure on retaining walls", J. Scientia Iranica, 17(4), 273-284.
  14. PEER Strong Motion Database (2013), http://peer.berkeley.edu/smcat
  15. Reese, L.C. and Van Impe, W.F. (2001), Single Piles and Pile Groups under Lateral Loading, A.A. Balkema, Rotterdam, Netherlands.
  16. Shah, B.R. (2007), "3D finite element analysis of integral abutment bridges subjected to thermal loading", MSc. Dissertation, Civil Engineering College of Engineering of Kansas State University, Manhattan.
  17. Spyrakos, C. and Loannidis, G. (2003), "Seismic behavior of a post-tensioned integral bridge including soil-structure interaction (SSI)", Soil Dyn. Earthq. Eng., 23(1), 53-63. https://doi.org/10.1016/S0267-7261(02)00150-1
  18. Tegos, I., Sextos, A., Mitoulis, S. and Tsitotas, M. (2005), "Contribution to the improvement of seismic performance of integral Bridges", Proceedings 4th European Workshop on the Seismic Behavior of Irregular and Complex Structures, Thessaloniki, Greece.
  19. Tsang, N.C.M. and England, G.L. (2002), "Soil/structure interaction of integral bridge with full height abutments", Proceedings of the 15th ASCE Engineering Mechanics Conference, Columbia University, NY.

Cited by

  1. Optimum shape and length of laterally loaded piles vol.68, pp.1, 2015, https://doi.org/10.12989/sem.2018.68.1.121
  2. Pseudo-static low cycle test on the mechanical behavior of PHC pipe piles with consideration of soil-pile interaction vol.171, pp.None, 2015, https://doi.org/10.1016/j.engstruct.2018.01.060
  3. Seismic Performance Evaluation of a Fully Integral Concrete Bridge with End-Restraining Abutments vol.2019, pp.None, 2015, https://doi.org/10.1155/2019/6873096
  4. Displacement-Based Simplified Calculation for Pile-Soil Interaction under Reciprocating Low-Cycle Pseudo-Static Loads vol.49, pp.4, 2019, https://doi.org/10.1520/jte20180742
  5. Modified Calculations of Lateral Displacement and Soil Pressure of Pile Considering Pile-Soil Interaction under Cyclic Loads vol.49, pp.4, 2015, https://doi.org/10.1520/jte20190267
  6. Seismic Performance of Various Piles Considering Soil-Pile Interaction under Lateral Cycle Loads for Integral Abutment Jointless Bridges (IAJBs) vol.10, pp.10, 2020, https://doi.org/10.3390/app10103406
  7. Challenges and opportunities for the application of integral abutment bridges in earthquake-prone areas: A review vol.135, pp.None, 2020, https://doi.org/10.1016/j.soildyn.2020.106183
  8. Influence of Construction Joint and Bridge Geometry on Integral Abutment Bridges vol.11, pp.11, 2015, https://doi.org/10.3390/app11115031