DOI QR코드

DOI QR Code

Dynamic to static eccentricity ratio for site-specific earthquakes

  • Kamatchi, P. (CSIR-Structural Engineering Research Centre) ;
  • Ramana, G.V. (Indian Institute of Technology) ;
  • Nagpal, A.K. (Indian Institute of Technology) ;
  • Iyer, Nagesh R. (CSIR-Structural Engineering Research Centre) ;
  • Bhat, J.A. (National Institute of Technology)
  • Received : 2014.09.03
  • Accepted : 2015.01.30
  • Published : 2015.08.25

Abstract

Damage of torsionally coupled buildings situated on soil sites has been reported in literature, however no site-specific studies are available for torsionally coupled buildings having site characteristics as a parameter. Effect of torsion is being accounted in seismic codes by the provision of design eccentricity where the dynamic to static eccentricity ratio is a parameter. In this paper, a methodology to determine dynamic to static eccentricity ratio of torsionally coupled buildings has been demonstrated for Delhi region for two torsionally coupled buildings on three soil sites. The variations of average and standard deviations of frame shears for stiff and flexible edges are studied for four eccentricity ratios for the two buildings for the three sites. From the limited studies made, it is observed that the dynamic to static eccentricity ratios observed for site-specific earthquakes are different from Indian seismic code specified value, hence a proposal is made to include a comment in Indian seismic code. Methodology proposed in this paper can be adopted for any region, for the estimation of dynamic to static eccentricity ratio for site specific earthquake.

Keywords

References

  1. Agarwal, P. and Gupta, V.K. (1994), "A note on dynamic eccentricities obtained by using stochastic approach and IS 1893-1984", Proceedings of Tenth Symposium on Earthquake Engineering, Roorkee India.
  2. Atkinson, G.M. and Beresnev, I.A. (2002), "Ground motions at Memphis and St. Louis from M7.5-8.0 earthquakes in the New Madrid seismic zone", Bull. Seismol. Soc. Am., 92(3), 1015-1024. https://doi.org/10.1785/0120010203
  3. Bakir, B.S., Yilmaz, M.T., Yakut, A. and Gulkan, P. (2005), "Re-examination of damage distribution in Adapazari: geotechnical considerations", Eng. Struct., 27(7), 1002-1013. https://doi.org/10.1016/j.engstruct.2005.02.002
  4. Balendra, T., Lam, N.T.K., Wilson, J.L. and Kong, K.H. (2002), "Analysis of long-distance earthquake tremors and base shear demand for buildings in Singapore", Eng. Struct., 24(1), 99-108. https://doi.org/10.1016/S0141-0296(01)00065-7
  5. Beresnev, I.A. and Atkinson, G.M. (1997), "Modeling finite - fault radiation from the ${\omega}^n$ spectrum", Bull. Seismol. Soc. Am., 87(1), 67-84.
  6. Beresnev, I.A. and Atkinson, G.M. (1998), "FINSIM - a FORTRAN program for simulating stochastic acceleration time histories from finite faults", Seismol. Res. Lett., 69(1), 27-32. https://doi.org/10.1785/gssrl.69.1.27
  7. Beresnev, I.A. and Atkinson, G.M. (2002), "Source parameters of earthquakes in eastern and western north America based on finite fault modeling", Bull. Seismol. Soc. Am., 92(2), 695-710. https://doi.org/10.1785/0120010101
  8. Bhat, J.A. (2003), "Effect of torsional ground motion on response of multistory buildings", Ph.D. thesis, Department of civil engineering, Indian Institute of Technology, Delhi.
  9. Bilham, R., Blume, F., Bendick, R. and Gaur, V.K. (1998), "The geodetic constrains on the translation and deformation of India: Implication for future great Himalayan earthquakes", Curr. Sci., 74(3), 213-229.
  10. Boore, D.M. (2003), "Simulation of ground motion using the stochastic method", Pure Appl. Geophys., 160(3-4), 635-676. https://doi.org/10.1007/PL00012553
  11. Boore, D.M. and Atkinson, G.M. (1987), "Stochastic prediction of ground motion and spectral response at hard-rock sites in Eastern North America", Bull. Seismol. Soc. Am., 77(2), 440-467.
  12. Boore, D.M. (1983), "Stochastic simulation of high frequency ground motions based on seismological models of the radiated spectra", Bull. Seismol. Soc. Am., 73(6), 1865-1894.
  13. Building Seismic Safety Council, (1997), "NEHRP recommended provision for seismic regulations for new buildings and other structures" Federal Emergency Management Agency (FEMA) 302 Part 1: Provisions, Washington, DC.
  14. Bureau of Indian Standards IS 1893-1984, (1984), "Criteria for earthquake resistant design of structures", New Delhi.
  15. Bureau of Indian Standards IS 1893-(Part 1):2002, (2002), "Criteria for earthquake resistant design of structures - Part1: General provisions and buildings", New Delhi.
  16. Chandler, A.M. (1986), "Building damage in Mexico city earthquake", Nat., 320, 497-501. https://doi.org/10.1038/320497a0
  17. Chandler, A.M. and Correnza, J.C. and Hutchinson, G.L. (1996), "Seismic torsional provisions: influence of element energy dissipation", J. Struct. Eng., ASCE, 122(5), 494-500. https://doi.org/10.1061/(ASCE)0733-9445(1996)122:5(494)
  18. Chandler, A.M. and Hutchinson, G.L. (1987), "Code design provisions for torsionally coupled buildings on elastic foundation", Earthq. Eng. Struct. Dyn., 15(4), 517-536. https://doi.org/10.1002/eqe.4290150407
  19. Cheung, W.T. and Tso, W.K. (1987), "Limitation of codified torsional provisions", Proceedings of fifth Canadian conference on earthquake engineering, Ottawa.
  20. Govindarajulu, L, Ramana, G.V., Hanumantha Rao, C. and Sitharam, T.G. (2004), "Site-specific ground response analysis", Curr. Sci., 87(10), 1354-1362.
  21. Hartzell, S.H. (1978), "Earthquake aftershocks as Green's functions", Geophys. Res. Lett., 5(1), 1-4. https://doi.org/10.1029/GL005i001p00001
  22. Heuze, F., Archuleta, R., Bonilla, F., Day, S., Doroudian, M., Elgamal, A., Gonzales, S., Hoehler, M., Lai, T., Lavallee, D., Lawrence, B., Liu, P.C., Martin, A., Matesic, L., Minster, B., Mellors, R., Oglesby, D., Park, S., Riemer, M., Steidl, J., Vernon, F., Vucetic, M., Wagoner, J. and Yang, Z. (2004), "Estimating site-specific strong earthquake motions", Soil Dyn. Earthq. Eng., 24(3), 199-223. https://doi.org/10.1016/j.soildyn.2003.11.002
  23. Humar, J. and Kumar, P. (2000), "A new look at the torsion design provisions in seismic building codes", 12WCEE, 1707, 1-8.
  24. Idriss, I.M. (1990), "Response of soft soil sites during earthquakes", Proceedings of Symposium to Honor Prof. H.B. Seed, Berkeley, CA.
  25. Idriss, I.M. and Seed, B.H. (1970), "Seismic response of soil deposits", J. Soil Mech. Found. Div., ASCE, 96(2), 631-638.
  26. International Conference of Building Officials, (1997), "Uniform Building Code 1997 Vol. 1 and Vol. 2: Structural Engineering Design and Provisions", California.
  27. Kamatchi, P. (2008), "Neural network models for site-specific seismic analysis of buildings", Ph.D. Thesis, Department of Civil Engineering Indian Institute of Technology, Delhi.
  28. Kamatchi, P., Ramana, G.V., Nagpal, A.K. and Lakhsmanan, N. (2007), "Site-specific response of framed buildings at Delhi for long distance large magnitude earthquakes", J. Struct. Eng., SERC, 34(3), 227-232.
  29. Kamatchi, P., Ramana, G.V., Nagpal, A.K. and Lakshmanan, N. (2008), "Site-specific analysis of Delhi region for scenario earthquakes", Proceedings of 14th world conference on earthquake engineering, October Beijing, China.
  30. Kamatchi, P., Ramana, G.V., Nagpal, A.K., Nagesh, R. Iyer, and Bhat, J.A. (2015), "ANN based methodology to determine dynamic to static eccentricity ratio of torsionally coupled buildings for site-specific earthquakes", J. Earthq. Eng., 19(1), 107-136. https://doi.org/10.1080/13632469.2014.946572
  31. Khattri, K.N. (1999), "An evaluation of earthquakes hazard and risk in northern India", Himalayan Geol., 20(1), 1-46.
  32. Kilar, V. and Koren, D. (2009), "Seismic behavior of asymmetric base isolated structures with various distributions of isolators", Eng. Struct., 31(4), 910-921. https://doi.org/10.1016/j.engstruct.2008.12.006
  33. Lam, N.T.K., Wilson, J.L. and Chandler, A.M. (2001), "Seismic displacement response spectrum estimated from the frame analogy soil amplification model", Eng. Struct., 23(11), 1437-1452. https://doi.org/10.1016/S0141-0296(01)00049-9
  34. Llera, J.C.D.L. and Chopra, A.K. (1994), "Using accidental eccentricity in code specified static and dynamic analysis of buildings", Earthq. Eng. Struct. Dyn., 23(9), 947-967. https://doi.org/10.1002/eqe.4290230903
  35. Mammo, T. (2005), "Site-specific ground motion simulation and seismic response analysis at the proposed bridge sites within the city of Addis Ababa, Ethiopia", Eng. Geol., 79(3-4), 127-150. https://doi.org/10.1016/j.enggeo.2005.01.005
  36. Mexico City seismic resistant design provision Council (1993), "Reglamento de Construcciones para el Distrito Federal (Construction Regulations for the Federal District (1993) and Normas Tecnicas Complementarias para Diseno por Sismo (Auxiliary Technical Notes for Seismic Design (1987)", Mexico.
  37. Nagpal, A.K. (1976), "Lateral load analysis of tall buildings by approximate methods", Ph.D. Thesis, Department of civil engineering Indian Institute of Technology, Delhi.
  38. Nakano, Y., Kusunoki, K. and Hino, Y. (2000), "Torsional response of RC buildings retrofitted with steel framed braces", 12WCEE, 1129, 1-8.
  39. National Research Council of Canada (1995), "National Building Code of Canada 1995" Institute for Research in Construction, Canada.
  40. Ordonez, G.A. (2000), "SHAKE 2000. A computer program for the I-D analysis of geotechnical earthquake engineering problems", University of California Berkeley, USA.
  41. Paglietti, A., Porcu, M.C. and Pittaluga, M. A. (2011), "Loophole in the Eurocode 8 allowing for non-conservative seismic design", Eng. Struct., 33(3), 780-785. https://doi.org/10.1016/j.engstruct.2010.12.001
  42. Rao, H.Ch. and Ramana, G.V. (2004), "Correlation between shear wave velocity and N value for Yamuna sand of Delhi" Proceedings of International Conference on Geotechnical Engineering, UAE, 262-268.
  43. Roumelioti, Z. and Beresnev, I.A. (2003), "Stochastic finite-fault modeling of ground motions from the 1999 Chi-Chi, Taiwan, earthquake: application to rock and soil sites with implications for nonlinear site response", Bull. Seismol. Soc. Am., 93(4), 1691-1702. https://doi.org/10.1785/0120020218
  44. Schnabel, P.B., Lysmer, J. and Seed, H.B. (1972), "SHAKE, a computer program for earthquake response analysis of horizontally layered sites", Report No. EERC 72 - 12, Earthquake Engineering Research Center University of California Berkeley, California, USA.
  45. Seed, B.H. and Idriss, I.M. (1969), "Influence of soil conditions on ground motions during earthquakes", J. Soil Mech. Found. Div. Proc., ASCE, 95(1), 99-137.
  46. Shakib, H. (2004), "Evaluation of dynamic eccentricity by considering soil-structure interaction: a proposal for seismic design codes", Soil Dyn. Earthq. Eng., 24(5), 369-378. https://doi.org/10.1016/j.soildyn.2004.01.003
  47. Singh, S.K. (2005), Personal communication.
  48. Singh, S.K., Mohanty, W.K., Bansal, B.K. and Roonwal, G.S. (2002), "Ground motion in Delhi from future large/great earthquakes in the central seismic gap of the Himalayan arc", Bull. Seismol. Soc. Am., 92(2), 555-569. https://doi.org/10.1785/0120010139
  49. Standards Association of New Zealand (1992), General Structural Design and Design Loadings for Buildings NZS 4203: 1992, New Zealand.
  50. Tena-Colunga, A. and Escamilla-Cruz, J.L. (2007), "Torsional amplification in asymmetric base isolated structures", Eng. Struct., 29(2), 237-247. https://doi.org/10.1016/j.engstruct.2006.03.036
  51. Tezcan, S.S., Kaya, I.E., Bal, E. and Ozdemir, Z. (2002), "Seismic amplification at Avcilar, Istanbul", Eng. Struct., 24(5), 661-667. https://doi.org/10.1016/S0141-0296(02)00002-0
  52. Tso, W.K. and Smith, R.S.H. (1999), "Re-evaluation of seismic torsional provisions", Earthq. Eng. Struct. Dyn., 28(8), 899-917. https://doi.org/10.1002/(SICI)1096-9845(199908)28:8<899::AID-EQE846>3.0.CO;2-Q
  53. Tso, W.K. and Dempsey, K.M. (1980), "Seismic torsional provisions for dynamic eccentricity", Earthq. Eng. Struct. Dyn., 8(3), 275-289. https://doi.org/10.1002/eqe.4290080307
  54. Vucetic, M. and Dobry, R. (1991), "Effect of soil plasticity on cyclic response", J. Geotech. Eng., ASCE, 117(1), 89-107. https://doi.org/10.1061/(ASCE)0733-9410(1991)117:1(89)
  55. Wong, C.M. and Tso, W.K. (1995), "Evaluation of seismic torsional provisions in uniform building code", J. Struct. Eng., ASCE, 21(10), 1436-1442.
  56. Wu, S.T. and Leyendecker, E.V. (1984), "Dynamic eccentricity of structures subjected to S-H waves", Earthq. Eng. Struct. Dyn., 12(5), 619-628. https://doi.org/10.1002/eqe.4290120504
  57. Yoshida, N., Kobayashi, S., Suetomi, I. and Miura K. (2002), "Equivalent Linear method considering frequency dependent characteristics of stiffness and damping", Soil Dyn. Earthq. Eng., 22(3), 205-222. https://doi.org/10.1016/S0267-7261(02)00011-8

Cited by

  1. Controlling the lateral displacement of building with external lever by using of MR damper vol.13, pp.1, 2015, https://doi.org/10.12989/eas.2017.13.1.001