International journal of advanced smart convergence

The Institute of Internet, Broadcasting and Communication (한국인터넷방송통신학회)
권호 표지
DOI QR코드

DOI QR Code

The Comparison of the Characteristics of Displacement Isolines in the Cylindrical Green Compact under Ultrasonic Vibration

  • Prakorb, Chartpuk (Faculty of Engineering, Rajamangala University of Technology Phra Nakhon) ;
  • Anan, Tempiam (Faculty of Engineering, Rajamangala University of Technology Phra Nakhon) ;
  • Somchai, Luangsod (Faculty of Industrial Education, Rajamangala University of Technology Phra Nakhon) ;
  • Vorawit, Voranawin (Faculty of Engineering, Rajamangala University of Technology Phra Nakhon)
  • Received : 2015.02.15
  • Accepted : 2015.04.16
  • Published : 2015.05.30
Download PDF
⟨ Previous Next ⟩

Abstract

This research is a comparison of the characteristics of the displacement isolines due to powder-die-wall friction that arise during the compaction of ceramic powders in conventional die. It has been done using the CosmosWorks software package of the SolidWorks simulation software. The results of comparative simulation with FEM showed that the comparison of the displacement isolines and distribution of deformation of the ceramic powders. In the case of conventional uniaxial dry compaction for long length cylindrical green compact, considerable bending of the layers in the form of a cone can be observed. It is symmetry along centerline of cylindrical green compact. The distributions of the deformation of the green compacts (diameter 14 mm, height 20 mm) as a result of conventional compaction under ultrasonic vibration with power 1 and 2 kW are reduced to 4% and 6.5% when compared with conventional compaction without ultrasonic vibration respectively. Thus, density distribution can be minimized by increasing the power of ultrasonic vibration.

Keywords

References

  1. Glass S.J., Ewsuk K.G, "Ceramic powder compaction," MRS Bulletin, Vol. 22, pp. 24-28, 1997.
  2. Groza J.R, "Sintering of nanocrystalline powders," Powder Metall, Vol. 35, pp. 59, 1999.
  3. Kear B.H., Colaizzi J., Mayo W.E., Liao S.C, "On the processing of nanocrystalline and nanocomposite ceramics," Scripta Materialia, Vol. 44, pp. 2065-2068, 2001. https://doi.org/10.1016/S1359-6462(01)00884-3
  4. Sinka I.C, "Modelling powder compaction," KONA Powder and particle, No. 25, pp. 4-22, 2007. https://doi.org/10.14356/kona.2007005
  5. Li Y., Liu H., Rockabrand A, "Wall friction and lubrication during compaction of coal logs," Powder Technology, Vol. 87, No. 3, pp. 259-267, 1996. https://doi.org/10.1016/0032-5910(96)03110-5
  6. Briscoe B.J., Rough S.L, "The effects of wall friction on the ejection of pressed ceramic parts," Powder Technology, Vol. 99, pp. 228-233, 1998. https://doi.org/10.1016/S0032-5910(98)00113-2
  7. Briscoe B.J., Rough S.L, "The effect of wall friction in powder compaction," Colloids and surfaces A:Physicochemical and Engineering Aspects, Vol. 137, pp. 103-116, 1998. https://doi.org/10.1016/S0927-7757(97)00210-0
  8. Tien Y.M., Wu P.L., Chu C.A., Chuang W.S., Wu L.H, "The friction-free compressibility curve of bentonite block," Physics and Chemistry of the Earth, Vol. 32, pp. 809-819, 2007. https://doi.org/10.1016/j.pce.2006.04.020
  9. Tien Y.M., Wu P.L., Huang W.H., Kuo M.F., Chu C.A, "Wall friction measurment and compaction characteristics of bentonite powders," Powder metallurgy, Vol. 173, pp. 140-151, 2007.
  10. Khasanov O.L., Dvilis E.S, "Net-shaping nanopowders with powerful ultrasonic action and methods of the density distribution control," Advances in Applied Ceramics, Vol. 107, No 3, pp. 135-141, 2008, Russia. https://doi.org/10.1179/174367508X297830
  11. Khasanov O.L., Dvilis E.S., Sokolov V.M., Pokholkov J.P, "Ceramic powders dry compaction under powerful ultrasound action," Key Eng. Mat, Vol. 264-268, pp.73-76, 2004, Russia. https://doi.org/10.4028/www.scientific.net/KEM.264-268.73
  12. Dvilis E.S., Khasanov O.L., Sokolov V.M., Pokholkov J.P, Method for compacting powder materials into articles and a mold for implementing the method, US patent, No. 6919041, 2004, Russia.
  13. Dvilis E.S., Khasanov O.L., Sokolov V.M., Pokholkov J.P, Method for compacting powder materials into articles and a mold for implementing the method, Euro patent application, No. EP 1459823 A1, 2005, Russia.
  14. Khasanov O.L., Dvilis E.S., Sokolov V.M., Pokholkov Yu.P, "A compaction method to make uniformly dense ceramic bodies of complex shape," Key Eng. Mat, Vol. 264-268, pp. 241-244, 2004, Russia. https://doi.org/10.4028/www.scientific.net/KEM.264-268.241
  15. Khasanov O.L., Dvilis E.S., Kachaev A.A, Method of collecting and compacting nano-disperse powders polidis, Tomsk Polytechnic University, 2008, Russia.