International journal of advanced smart convergence

The Institute of Internet, Broadcasting and Communication (한국인터넷방송통신학회)
권호 표지
DOI QR코드

DOI QR Code

Empirical Modeling of Fouling Rate of Milk Pasteurization Process : A case study

  • Budiati, Titik (Food Technology, State Polytechnic of Jember) ;
  • Wahyono, Nanang Dwi (State Polytechnic of Jember) ;
  • Hefni, Muh. (Food Technology, State Polytechnic of Jember)
  • Received : 2015.01.10
  • Accepted : 2015.03.13
  • Published : 2015.05.30
Download PDF
⟨ Previous Next ⟩

Abstract

Fouling in heat exchanger becomes a major problem of dairy industry and it increases the production cost. These are lost productivity, additional energy, additional equipment, chemical, manpower, and environmental impact. Fouling also introduces the risk of food safety due to the improper heating temperature which allow the survival of pathogenic bacteria in milk, introducing biofilm formation of pathogenic bacteria in equipments and spreading the pathogenic bacteria to milk. The aim of this study is to determine the fouling rate during pasteurization process in heat exchanger of pasteurized milk produced by Village Cooperative Society (KUD) "X" in Malang, East Java Indonesia by using empirical modeling. The fouling rate is found as $0.3945^{\circ}C/h$ with the heating process time ranged from 0 to 2 hours and temperature difference (hot water inlet temperature and milk outlet temperature) ranged from 0.654 to $1.636^{\circ}C$. The fouling rate depends on type and characteristics of heat exchangers, time and temperature of process, milk type, age of milk, seasonal variations, the presence of microorganism and more. This results will be used to plan Cleaning In Place (CIP) and to design the control system of pasteurization process in order to maintain the milk outlet temperature as standard of pasteurization.

Keywords

References

  1. Gillham, C.R., Fryer, P.J., Hasting, A.P.M. & Wilson, D.I, "Enhanced cleaning of whey protein soils using pulsed flows" Journal of Food Engineering, Vol.46, pp.199-209, 2000, USA. https://doi.org/10.1016/S0260-8774(00)00083-2
  2. Bansal, B. & Chen, X. D, "A critical review of milk fouling in heat exchangers," Comprehensive Reviews in Food Science and Food Safety, Vol. 5, No. 2, pp 27-33, 2006, USA. https://doi.org/10.1111/j.1541-4337.2006.tb00080.x
  3. Oliver, S. P., Jayarao, B. M., & Almeida, R. A, "Foodborne pathogens in milk and the dairy farm environment: food safety and public health implications," Foodborne Pathogens and Disease, Vol. 2, No. 2, pp. 115-129, 2005. https://doi.org/10.1089/fpd.2005.2.115
  4. van Asselt, A.J., Vissers, M.M.M., Smit, F., & de Jong, P, "In-line control of fouling. Proceedings of heat exchanger fouling and cleaning-challenges and opportunities," Proceeding of Engineering Conferences International, June 5-10, 2005, Kloster Irsee, Germany.
  5. AOAC, Official Methods of Analysis of AOAC International, 17th ed., AOAC International, Maryland, USA, 2000.
  6. AOAC, Official Methods of Analysis of AOAC International, 18th ed., AOAC International, Maryland, USA, 2005.
  7. Srichantra, A., Newstead, D. F., Mccarthy, O. J., & Paterson, A. H. J, "Effect of preheating on fouling of a pilot scale UHT sterilizing plant by recombined, reconstituted and fresh whole milks," Food and Bioproducts Processing. Vol. 84, No. 4, pp. 279-285, 2006, Germany. https://doi.org/10.1205/fbp06027
  8. Sadeghinezhad, E., Kazi, S. N., Dahari, M., Safaei, M. R., Sadri, R., & Badarudin, A, "A comprehensive review of milk fouling on heated surfaces," Critical reviews in food science and nutrition, [Epub ahead of print], 2014, USA.
  9. Petermeier, H., Benning, R., Delgado, A., Kulozik, U., Hinrichs, J., & Becker, T, "Hybrid model of the fouling process in tubular heat exchangers for the dairy industry," Journal of Food Engineering, Vol. 55, No. 1, pp. 9-17. 2002, USA. https://doi.org/10.1016/S0260-8774(01)00223-0
  10. Fickak, A., Al-Raisi, A., & Chen, X. D, "Effect of whey protein concentration on the fouling and cleaning of a heat transfer surface," Journal of food engineering, Vol. 104, No. 3. pp. 323-331, 2011, USA. https://doi.org/10.1016/j.jfoodeng.2010.11.004
  11. Albert, F., Augustin, W., and Scholl, S, "Roughness and constriction effects on heat transfer in crystallization fouling," Chemical Engineering Science, Vol. 66, No. 3, pp. 499-509, 2011, The Netherlands. https://doi.org/10.1016/j.ces.2010.11.021
  12. Bansal, B., Habib, B., Rebmann, H., & Chen, X.D, "Effect of seasonal variation in milk composition on dairy fouling," Proceedings of 8th International Conference on Heat Exchange, fouling and Cleaning, June 14-19, 2009, Austria.
  13. De Jong, P, "Impact and control of fouling in milk processing," Trends in Food Science and Technology, Vol. 8, No. 12, pp. 401-405, 1997, The Netherlands. https://doi.org/10.1016/S0924-2244(97)01089-3
  14. Hoffman, P. C., and Esser, N. M, "Effects of Forage Species on Milk Protein Production by Lactating Dairy Cows," The Professional Animal Scientist, Vol. 17, No. 4, pp. 274-279, 2001, USA. https://doi.org/10.15232/S1080-7446(15)31640-5
  15. Hidayati, A, "Dairy Goats Feeding Profile in Lowland Area, East Java Province, Indonesia," Journal of Biology, Agriculture and Healthcare, Vol. 4, No. 7, pp. 32-38, 2014, USA
  16. Klopcic, M., Malovrh, S., Gorjanc, G., Kovac, M., & Osterc, J, "Prediction of daily milk fat and protein content using alternating (AT) recording scheme," Czech Journal of. Animal Science, Vol. 48. pp. 449-458, 2003, Czech.
  17. Frank O'Mahony, F, Experiences in Ethiopia in ILCA Manual No. 4, Dairy Technology Unit International Livestock Centre for Africa, Addis Ababa, Ethiopia, 1998.
  18. Prakash, S., Datta, N., & Deeth, H. C, "Methods of detecting fouling caused by heating of milk," Food reviews international, Vol. 21, No. 3, pp. 267-293, 2005, USA. https://doi.org/10.1080/FRI-200061609