Coupled systems mechanics

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Combined hardening and localized failure with softening plasticity in dynamics

  • Do, Xuan Nam (Universite de Technologie Compiegne/Sorbonne Universites, Laboratoire Roberval de Mecanique Centre de Recherche Royallieu) ;
  • Ibrahimbegovic, Adnan (Universite de Technologie Compiegne/Sorbonne Universites, Laboratoire Roberval de Mecanique Centre de Recherche Royallieu) ;
  • Brancherie, Delphine (Universite de Technologie Compiegne/Sorbonne Universites, Laboratoire Roberval de Mecanique Centre de Recherche Royallieu)
  • Received : 2015.04.10
  • Accepted : 2015.06.09
  • Published : 2015.06.25
⟨ Previous Next ⟩

Abstract

We present for one-dimensional model for elastoplastic bar with combined hardening in FPZ - fracture process zone and softening with embedded strong discontinuities. The simplified version of the model without FPZ is directly compared and validated against analytical solution of Bazant and Belytschko (1985). It is shown that deformation localizes in an area which is governed by the chosen element size and therefore causes mesh sensitivity and that the length of the strain-softening region tends to localize into a point, which also agrees with results obtained by stability analysis for static case. Strain increases in the softening domain with a simultaneous decrease of stress. The problem unloads elastically outside the strain-softening region. The more general case with FPZ leads to more interesting results that also account for induced strain heterogeneities.

Keywords

Acknowledgement

Supported by : Vietnamese Ministry of Education and Training and funding of Chaire de Mecanique Picardie

References

  1. Armero, F. and Linder, C. (2009), "Numerical simulation of dynamic fracture using finite elements with embedded discontinuities", Int. J. Fracture, 160(2), 119-141. https://doi.org/10.1007/s10704-009-9413-9
  2. Bazant, Z.P. and Belytschko, T.B. (1985), "Wave propagation in a strain-softening bar: Exact solution", J. Eng. Mech. - ASCE, 111(3), 381-389. https://doi.org/10.1061/(ASCE)0733-9399(1985)111:3(381)
  3. Brancherie, D. and Ibrahimbegovic, A. (2009), "Novel anisotropic continuum-discrete damage model capable of representing localized failure of massive structures: Part I: theoretical formulation and numerical implementation", Eng. Comput., 26(1-2), 100-127. https://doi.org/10.1108/02644400910924825
  4. Ibrahimbegovic, A. (2009), Nonlinear Solid Mechanics: Theoretical Formulations and Finite Element Solution Methods, Springer, Berlin, Germany.
  5. Ibrahimbegovic, A. and Brancherie, D. (2003), "Combined hardening and softening constitutive model of plasticity: precursor to shear slip line failure", Comput. Mech., 31(1-2), 88-100. https://doi.org/10.1007/s00466-002-0396-x
  6. Ibrahimbegovic, A., Hajdo, E. and Dolarevic, S. (2013), "Linear instability or buckling problems for mechanical and coupled thermomechanical extreme conditions", Coupled Syst. Mech., 2(4), 349-374. https://doi.org/10.12989/csm.2013.2.4.349
  7. Ibrahimbegovic, A. and Melnyk, S. (2007), "Embedded discontinuity finite element method for modeling of localized failure in heterogeneous materials with structured mesh: an alternative to extended finite element method", Comput Mech., 40(1), 149-155. https://doi.org/10.1007/s00466-006-0091-4
  8. Lemaitre, J. and Chaboche, J. L. (1988), Mecanique De Materiaux Solides, Dunod, Paris, France.
  9. Neilsen, M.K. and Schreyer, H.L. (1993), "Bifurcations in elastic-plastic materials", Int. J. Solids Struct., 30(4), 521-544. https://doi.org/10.1016/0020-7683(93)90185-A
  10. Ngo, V.M., Ibrahimbegovic, A. and Hajdo, E. (2014), "Nonlinear instability problems includinglocalized plastic failure and large deformations for extreme thermomechanical load", Coupled Syst. Mech., 3(1), 89-110. https://doi.org/10.12989/csm.2014.3.1.089
  11. Nikolic, M. and Ibrahimbegovic, A. (2015), "Rock mechanics model capable of representing initial heterogeneities and full set of 3D failure mechanisms", Comput. Method. Appl. M., 290, 209-227. https://doi.org/10.1016/j.cma.2015.02.024
  12. Nikolic, M., Ibrahimbegovic, A. and Miscevic, P. (2015), "Brittle and ductile failure of rocks: Embedded discontinuity approach for representing mode I and mode II failure mechanisms", Int. J. Numer. Meth. Eng., 102(8), 1507-1526. https://doi.org/10.1002/nme.4866
  13. Oliver, J. (1996), "Modelling strong discontinuities in solid mechanics via strain softening constitutive equations. Part 2: numerical simulation", Int. J. Numer. Meth. Eng., 39(21), 3575-3600. https://doi.org/10.1002/(SICI)1097-0207(19961115)39:21<3575::AID-NME65>3.0.CO;2-E
  14. Ortiz, M. (1985), "A constitutive theory for inelastic behavior of concrete", Mech. Mater., 4, 67-93. https://doi.org/10.1016/0167-6636(85)90007-9
  15. Rudnicki, J. W. and Rice, J. R. (1975), "Conditions for the localization of deformation in pressure-sensitive dilatant materials", J. Mech. Phys. Solids, 23, 371-394. https://doi.org/10.1016/0022-5096(75)90001-0
  16. Simo, J.C., Oliver, J. and Armero, F. (1993), "An analysis of strong discontinuities induced by strain-softening in rate-independent inelastic solids", Comput. Mech., 12(5), 277-296. https://doi.org/10.1007/BF00372173
  17. Taylor, R., FEAP Finite Element Analysis Program, University of California: Berkeley. (Available from http://www.ce.berkeley.edurlt).