Structural Engineering and Mechanics

  • 제55권3호
  • /
  • Pages.525-534
  • /
  • 2015
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Time-variant structural fuzzy reliability analysis under stochastic loads applied several times

  • Fang, Yongfeng (School of Mechanical Engineering, Guizhou University of Science Engineering) ;
  • Xiong, Jianbin (School of Computer and Electronic Information, Guangdong University of Petrochemical Technology) ;
  • Tee, Kong Fah (Department of Civil Engineering, University of Greenwich)
  • 투고 : 2015.02.09
  • 심사 : 2015.05.08
  • 발행 : 2015.08.10
⟨ 이전 논문 다음 논문 ⟩

초록

A new structural dynamic fuzzy reliability analysis under stochastic loads which are applied several times is proposed in this paper. The fuzzy reliability prediction models based on time responses with and without strength degeneration are established using the stress-strength interference theory. The random loads are applied several times and fuzzy structural strength is analyzed. The efficiency of the proposed method is demonstrated numerically through an example. The results have shown that the proposed method is practicable, feasible and gives a reasonably accurate prediction. The analysis shows that the probabilistic reliability is a special case of fuzzy reliability and fuzzy reliability of structural strength without degeneration is also a special case of fuzzy reliability with structural strength degeneration.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China

참고문헌

  1. Ayyub, B.M. and Lai, K.L. (1992), "Structural reliability assessment with ambiguity and vagueness in failure", Naval Eng. J., 104(3), 21-35. https://doi.org/10.1111/j.1559-3584.1992.tb02221.x
  2. Ben-Haim, Y. (1994), "A non-probabilistic concept of reliability", Struct. Saf., 14(4), 227-245. https://doi.org/10.1016/0167-4730(94)90013-2
  3. Ellishkoff, I. (1995), "Essay on uncertainties in elastic and viscoelastic structures: form A M Freudenthal's criticisms to modern convex modeling", Comput. Struct., 56(6), 871-895. https://doi.org/10.1016/0045-7949(94)00499-S
  4. Fang, Y.F., Xiong, J.B. and Tee, K.F. (2014), "An iterative hybrid random-interval structural reliability analysis", Earthq. Struct., 7(6), 1061-1070. https://doi.org/10.12989/eas.2014.7.6.1061
  5. Froling, M., Persson, K. and Austrell, P.E. (2014), "A reduced model for the design of glass structures subjected to dynamic impulse load", Eng. Struct., 80(12), 53-60. https://doi.org/10.1016/j.engstruct.2014.08.043
  6. He, S.Q. and Wang, S. (1993), Structural Reliability Analysis and Design, National Defence Industry Pres, Beijing s.
  7. Huang, H.Z. (2000), "Calculation of fuzzy reliability in the case of random stress and fuzzy fatigue strength", Chin. J. Mech. Eng., 13(3), 197-200. https://doi.org/10.3901/CJME.2000.03.197
  8. Huang, H.Z., Sun, Z.Q., Guo, D.M., Li, L., Zhou, F. and Tian, Z.F. (2001), "Fuzzy reliability analysis in the case of random stress and fuzzy strength", J. Mech. Streng., 23(3), 305-307.
  9. Jiang, Q.M. and Chen, C.H. (2003), "A numerical algorithm of fuzzy reliability", Reliab. Eng. Syst. Saf., 80(2), 299-307. https://doi.org/10.1016/S0951-8320(03)00055-3
  10. Kim, J.H., Lee, S.H., Paik, I. and Lee, H.S. (2015), "Reliability assessment of reinforced concrete columns based on the P-M interaction diagram using AFOSM", Struct. Saf., 55(6), 70-79. https://doi.org/10.1016/j.strusafe.2015.03.003
  11. Laskar, A., Lu, L., Qin, F., Mo, Y.L., Hsu, T.C., Lu, X. and Fan, F. (2014), "Constitutive models of concrete structures subjected to seismic shear", Earthq. Struct., 7(5), 336-348.
  12. Ma, J., Chen, J.J. and Gao, W. (2006), "Dynamic response analysis of fuzzy stochastic truss structures under fuzzy stochastic excitation", Comput. Mech., 38(3), 283-292. https://doi.org/10.1007/s00466-006-0052-y
  13. Mahmoodian, M., Alani, A.M. and Tee, K.F. (2012), "Stochastic failure analysis of the gusset plates in the Mississippi river bridge", Int. J. Forens. Eng., 1(2), 153-166. https://doi.org/10.1504/IJFE.2012.050415
  14. Qiu, Z. (2005), Convex Method Based on Non-probabilistic Set-theory and Its Application, National Defence Industry Press, Beijing.
  15. Rashid, E.C. and Ramezan, A.I. (2013), "Demand response modification factor for the investigation of inelastic response of base isolated structures", Earthq. Struct., 5(1), 210-226
  16. Rezazadeh, S., Mehrabi, M., Pashaee, T. and Mirzaee, I. (2012), "Using adaptive neuro-fuzzy inference system (ANFIS) for proton exchange membrane fuel cell (PEMFC) performance modeling", J. Mech. Sci. Tech., 26(11), 3701-3709 https://doi.org/10.1007/s12206-012-0844-2
  17. Schaff, J.R. and Davidson, B.D. (1997), "Life prediction methodology for composite structures. Part I-constant amplitude and two-stress level fatigue", J. Compos. Mater., 31(2), 128-157. https://doi.org/10.1177/002199839703100202
  18. Stemberk, P. and Kruis, J. (2007), "Fuzzy dynamic structural analysis of two-dimensional frame", Struct. Eng. Mech., 25(2), 147-160. https://doi.org/10.12989/sem.2007.25.2.147
  19. Tee, K.F. and Khan, L.R. (2014), "Reliability analysis of underground pipelines with correlation between failure modes and random variables", J. Risk Reliab., Proc. Inst. Mech. Eng., Part O, 228(4), 362-370. https://doi.org/10.1177/1350650113508934
  20. Tutmez, B., Cengiz, A.K. and Sarici, D.E. (2013), "Use of uncertain numbers for appraising tensile strength of concrete", Struct. Eng. Mech., 46(4), 132-148.
  21. Wang, L. and Liu, W.T. (2005), "Model for structural fuzzy reliability analysis based on fuzzy random parameter", J. Beijing Univ. Aeronaut. Astronaut., 31(4), 412-417.
  22. Wang, Z., Kang, R. and Xie, L. (2010), "Reliability modeling of systems with dependent failure when the life measured by the number of loadings", J. Mech. Eng., 32(3), 188-197.
  23. Zhu, J.S., Chen, C. and Han, Q.H. (2014), "Vehicle-bridge coupling vibration analysis based fatigue reliability prediction of prestressed concrete highway bridges", Struct. Eng. Mech., 49(2), 203-223. https://doi.org/10.12989/sem.2014.49.2.203

피인용 문헌

  1. Fuzzy-Based Robustness Assessment of Buried Pipelines vol.9, pp.1, 2018, https://doi.org/10.1061/(ASCE)PS.1949-1204.0000304
  2. Time-Variant Reliability Analysis for Rubber O-Ring Seal Considering Both Material Degradation and Random Load vol.10, pp.10, 2017, https://doi.org/10.3390/ma10101211
  3. Time-domain multi-state markov model for engine system reliability analysis vol.3, pp.3, 2016, https://doi.org/10.1299/mej.16-00084
  4. Combination of line sampling and important sampling for reliability assessment of buried pipelines pp.1748-0078, 2018, https://doi.org/10.1177/1748006X18764986
  5. Reliability based maintenance methodology for sustainable transport asset management vol.13, pp.1, 2018, https://doi.org/10.1556/606.2018.13.1.9
  6. Fuzzy-based optimised subset simulation for reliability analysis of engineering structures pp.1744-8980, 2019, https://doi.org/10.1080/15732479.2018.1552977
  7. Structural reliability analysis using response surface method with improved genetic algorithm vol.62, pp.2, 2015, https://doi.org/10.12989/sem.2017.62.2.139
  8. A novel evidence theory model and combination rule for reliability estimation of structures vol.62, pp.4, 2015, https://doi.org/10.12989/sem.2017.62.4.507
  9. Wave-passage effect on the seismic response of suspension bridges considering local soil conditions vol.17, pp.2, 2015, https://doi.org/10.1007/s13296-017-6010-z
  10. Bayesian analysis of small probability incidents for corroding energy pipelines vol.165, pp.None, 2018, https://doi.org/10.1016/j.engstruct.2018.03.038
  11. Reliability estimation of buried steel pipes subjected to seismic effect vol.20, pp.None, 2019, https://doi.org/10.1016/j.trgeo.2019.100242
  12. Tribological Characteristic of a Ring Seal with Graphite Filler vol.13, pp.2, 2015, https://doi.org/10.3390/ma13020311
  13. Fuzzy Reliability and Risk-Based Maintenance of Buried Pipelines Using Multiobjective Optimization vol.26, pp.2, 2015, https://doi.org/10.1061/(asce)is.1943-555x.0000537