Structural Engineering and Mechanics

  • 제55권3호
  • /
  • Pages.511-523
  • /
  • 2015
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Repair of flange damage steel-concrete composite girders using CFRP sheets

  • Wang, Lianguang (Department of Civil Engineering, College of Resources and Civil Engineering, Northeastern University Shenyang) ;
  • Hou, Wenyu (Department of Civil Engineering, College of Resources and Civil Engineering, Northeastern University Shenyang) ;
  • Han, Huafeng (Department of Civil Engineering, College of Resources and Civil Engineering, Northeastern University Shenyang) ;
  • Huo, Junhua (Liaoning Provincial College of Communications Shenyang)
  • 투고 : 2015.01.12
  • 심사 : 2015.05.08
  • 발행 : 2015.08.10
⟨ 이전 논문 다음 논문 ⟩

초록

Damaged steel-concrete composite girders can be repaired and retrofitted by epoxy-bonded carbon fiber-reinforced polymer (CFRP) sheets to the critical areas of tension flanges. This paper presents the results of a study on the behavior of damaged steel-concrete composite girders repaired with CFRP sheets under static loading. A total of seven composite girders made of I20A steel sections and 80mm-thick by 900mm-wide concrete slabs were prepared and tested. CFRP sheets and prestressed CFRP sheets were used to repair the specimens. The specimens lost the cross-sectional area of their tension flanges with 30%, 50% and 100%. The results showed that CFRP sheets had no significant effect on the yield loads of strengthened composite girders, but had significant effect on the ultimate loads. The yield loads, elastic stiffness, and ultimate bearing capacities of strengthened composite girders had been changed as a result of prestressed CFRP sheets, the utilization ratio of CFRP sheets could be effectively improved by applying prestress to CFRP sheets. Both the yield loads and ultimate bearing capacities had been changed as a result of steel beam's flange damage level and CFRP sheets could cover the girders' shortage of bearing capacity with 30% and 50% flange damage, respectively.

키워드

참고문헌

  1. Bocciarelli, M. and Colombi, P. (2013), "On the elasto-plastic behavior of continuous steel beams reinforced by bonded CFRP lamina", Eng. Struct., 49, 756-766. https://doi.org/10.1016/j.engstruct.2012.12.018
  2. Bocciarelli, M., di Feo, C., Nistico, N., Pisani, M.A. and Poggi, C. (2013), "Failure of RC beams strengthened in bending with unconventionally arranged CFRP laminates", Compos. Part B: Eng., 54, 246-254. https://doi.org/10.1016/j.compositesb.2013.05.028
  3. Boukhezar, M., Samai, M.L., Mesbah, H.A. and Houari, H. (2013), "Flexural behaviour of reinforced low-strength concrete beams strengthened with CFRP plates", Struct. Eng. Mech., 47(6), 819-838. https://doi.org/10.12989/sem.2013.47.6.819
  4. Colombi, P. and Poggi, C. (2006), "An experimental analytical and numerical study of the static behavior of steel beams reinforced by pultruded CFRP strips", Compos. Part B, 37(1), 64-73. https://doi.org/10.1016/j.compositesb.2005.03.002
  5. Deng, J., Lee, M.M. and Li, S. (2011), "Flexural strength of steel-concrete composite beams reinforced with a prestressed CFRP plate", Construct. Build. Mater., 25(1), 379-384. https://doi.org/10.1016/j.conbuildmat.2010.06.015
  6. El-Hacha, R. and Ragab, N. (2006), "Flexural strengthening of composite steel-concrete girders using advanced composite materials", Proceedings of the Third International Conference on FRP Composites in Civil Engineering.
  7. Ellobody, E. (2011), "Performance of composite girders strengthened using carbon fibre reinforced polymer laminates", Thin Wall. Struct., 49(11), 1429-1441. https://doi.org/10.1016/j.tws.2011.07.002
  8. Fava, G., Sonzogni, L. and Colombi, P. (2014), "Fatigue behavior of cracked steel beams reinforced by using CFRP materials", Procedia Eng., 74, 388-391. https://doi.org/10.1016/j.proeng.2014.06.285
  9. Fayyadh, M.M. and Razak, H.A. (2012), "Assessment of effectiveness of CFRP repaired RC beams under different damage levels based on flexural stiffness", Construct. Build. Mater., 37, 125-134. https://doi.org/10.1016/j.conbuildmat.2012.07.021
  10. Hmidan, A., Kim, Y. J. and Yazdani, S. (2014), "Correction factors for stress intensity of CFRP-strengthened wide-flange steel beams with various crack configurations", Construct. Build. Mater., 70(15), 522-530. https://doi.org/10.1016/j.conbuildmat.2014.08.008
  11. Obaidat, Y.T., Heyden, S., Dahlblom, O., Abu-Farsakh, G. and Abdel-Jawad, Y. (2011), "Retrofitting of reinforced concrete beams using composite laminates", Construct. Build. Mater., 25(2), 591-597. https://doi.org/10.1016/j.conbuildmat.2010.06.082
  12. Panjehpour, M., Ali, A.A.A. and Aznieta, F.N. (2014), "Energy absorption of reinforced concrete deep beams strengthened with CFRP sheet", Steel Compos. Struct., 16(5), 481-489. https://doi.org/10.12989/scs.2014.16.5.481
  13. Peng, H., Zhang, J., Cai, C.S. and Liu, Y. (2014), "An experimental study on reinforced concrete beams strengthened with prestressesed near surface mounted CFRP strips", Eng. Struct., 79(15), 222-233. https://doi.org/10.1016/j.engstruct.2014.08.007
  14. Sallam, H.E.M., Badawy, A.A.M., Saba, A.M. and Mikhail, F.A. (2010), "Flexural behavior of strengthened steel-concrete composite beams by various plating methods", J. Construct. Steel Res., 66(8-9), 1081-1087. https://doi.org/10.1016/j.jcsr.2010.03.005
  15. Schnerch, D., Dawood, M. and Rizkalla, S. (2005), "Strengthening steel-concrete composite bridges with high modulus carbon fiber reinforced polymer (CFRP) laminates", Proceedings of the Third International Conference on Composites in Construction, Lyon France, July.
  16. Schnerch, D. and Rizkalla, S. (2008), "Flexural strengthening of steel bridges with high modulus CFRP strips", J. Bridge Eng., 13(2), 192-201. https://doi.org/10.1061/(ASCE)1084-0702(2008)13:2(192)
  17. Sen, R. and Liby, L. (1994), "Repair of steel composite bridge sections using carbon fiber reinforced plastic laminates", FDOT-510616, Florida Dept. of Transportation, Tallahassee, Fla.
  18. Sen, R., Liby, L. and Mullins, G. (2001), "Strengthening steel bridge sections using CFRP laminates", Compos. Part B: Eng., 32(4), 309-22. https://doi.org/10.1016/S1359-8368(01)00006-3
  19. Shaat, A. and Fam, A. (2008), "Repair of cracked steel girders connected to concrete slabs using carbon-fiber-reinforced polymer sheets", J. Compos. Constr., 12(6), 650-659. https://doi.org/10.1061/(ASCE)1090-0268(2008)12:6(650)
  20. Tavakkolizadeh, M. and Saadatmanesh, H. (2003), "Strengthening of steel-concrete composite girders using carbon fiber reinforced polymers sheets", J. Struct. Eng., 129(1), 30-40. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:1(30)
  21. Tavakkolizadeh, M. and Saadatmanesh, H. (2003), "Repair of damaged steel-concrete composite girders using carbon fiber-reinforced polymer sheets", J. Compos. Constr., 7(4), 311-322. https://doi.org/10.1061/(ASCE)1090-0268(2003)7:4(311)
  22. Wu, G., Wang, H.T., Wu, Z.S., Liu, H.Y. and Ren, Y. (2012), "Experimental study on the fatigue behavior of steel beams strengthened with different fiber-reinforced composite plates", J. Compos. Constr., 16(2), 127-137. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000243
  23. Xue, W., Tan, Y. and Zeng, L. (2010), "Flexural response predictions of reinforced concrete beams strengthened with prestressed CFRP plates", Compos. Struct., 92(3), 612-622. https://doi.org/10.1016/j.compstruct.2009.09.036
  24. Yu, Q.Q., Chen, T., Gu, X.L., Zhao, X.L. and Xiao, Z.G. (2013), "Fatigue behaviour of CFRP strengthened steel plates with different degrees of damage", Thin Wall. Struct., 69, 10-17. https://doi.org/10.1016/j.tws.2013.03.012

피인용 문헌

  1. Strengthening of steel hollow pipe sections subjected to transverse loads using CFRP vol.60, pp.1, 2016, https://doi.org/10.12989/sem.2016.60.1.163
  2. Effect of soil overburden pressure on mechanical properties of carbon FRP strips vol.61, pp.5, 2015, https://doi.org/10.12989/sem.2017.61.5.637
  3. Parametric study of shear strength of CFRP strengthened end-web panels vol.31, pp.2, 2015, https://doi.org/10.12989/scs.2019.31.2.159
  4. Test and Numerical Analysis on Damaged Steel Beam Strengthened with Prestressed CFRP Sheet vol.2021, pp.None, 2021, https://doi.org/10.1155/2021/6711877