DOI QR코드

DOI QR Code

Random imperfection effect on reliability of space structures with different supports

  • Received : 2015.01.03
  • Accepted : 2015.04.06
  • Published : 2015.08.10

Abstract

The existence of initial imperfections in manufacturing or assembly of double-layer space structures having hundreds or thousands of members is inevitable. Many of the imperfections, such as the initial curvature of the members and residual stresses in members, are all random in nature. In this paper, the probabilistic effect of initial curvature imperfections in the load bearing capacity of double-layer grid space structures with different types of supports have been investigated. First, for the initial curvature imperfection of each member, a random number is generated from a gamma distribution. Then, by employing the same probabilistic model, the imperfections are randomly distributed amongst the members of the structure. Afterwards, the collapse behavior and the ultimate bearing capacity of the structure are determined by using nonlinear push down analysis and this procedure is frequently repeated. Ultimately, based on the maximum values of bearing capacity acquired from the analysis of different samples, structure's reliability is obtained by using Monte Carlo simulation method. The results show the sensitivity of the collapse behavior of double-layer grid space structures to the random distribution of initial imperfections and supports type.

Keywords

References

  1. Affan, A. (1989), "Collapse of double layer space grid structures", Ph.D. Dissertation, University of Cambridge, UK.
  2. Affan, A. and Calladine, C.R. (1991),"Initial bar tensions in pin jointed assemblies", Int. J. Space Struct., 4(1), 1-16.
  3. AISC (2010), American Institute of Steel Construction, ANSI/AISC360-10: Specification for Structural Steel Buildings, AISC, Chicago, Illinois.
  4. Broggi, M. and Schueller, G.I. (2011), "Efficient modeling of imperfections for buckling analysis of composite cylindrical shells", Eng. Struct., 33(5), 1796-1806. https://doi.org/10.1016/j.engstruct.2011.02.019
  5. De Paor, C., Cronin, K., Gleeson, J.P. and Kelliher, D. (2012), "Statistical characterization and modeling of random geometric imperfections in cylindrical shells", Thin Wall. Struct., 58, 9-17. https://doi.org/10.1016/j.tws.2012.04.004
  6. El-Sheikh, A.l. (1991), "The effect of composite action on the behavior of space structures", Ph.D. Dissertation, University of Cambridge, UK.
  7. El-Sheikh, A.l. (1995), "Sensitivity of space trusses to member geometric imperfections", Int. J. Space Struct., 10(2), 89-98. https://doi.org/10.1177/026635119501000202
  8. El-Sheikh, A.l. (1997), "Effect of member length imperfections on triple-layer space trusses", J. Eng. Struct., 19(7), 540-550. https://doi.org/10.1016/S0141-0296(96)00120-4
  9. El-Sheikh, A.l. (2002), "Effect of geometric imperfections on single-layer barrel vaults", Int. J. Space Struct., 17(4), 271-283. https://doi.org/10.1260/026635102321049538
  10. McKenna, F., Fenves, G.L. and Scott, M.H. (2000), "Open system for earthquake engineering simulation. Pacific Earthquake Engineering Research Center", University of California, Berkeley, Available from http://opensees.berkeley.edu.
  11. Melchers, R.E. (1999), Structural Reliability Analysis and Prediction, John Wiley & Sons, Second Edition.
  12. Nowak A.S. and Collins K.R. (2000), Reliability of Structures, Mc. Graw Hill.
  13. Schenk, C.A. and Schueller, G.I. (2007), "Buckling analysis of cylindrical shells with cutouts including random boundary and geometric imperfections", Comput. Meth. Appl. Mech. Eng., 196(35), 3424-3434. https://doi.org/10.1016/j.cma.2007.03.014
  14. Schenk, C.A. and Schueller, G.I. (2005), "12 stability analysis of cylindrical shells with random imperfections", Uncert. Asses. Large Finite Elem. Syst., 24, 81-109. https://doi.org/10.1007/11673941_12
  15. Schmidt, L.C. Morgan, P.R. and Hanaor, A. (1982), "Ultimate load testing of space trusses", J. Struct. Div., ASCE, 180(6), 1324-1335.
  16. Schmidt, L.C., Morgan, P.R., Omeagher, A.J. and Cogan, K. (1980), "Ultimate load behavior of a full scale space truss", Proc. Inst. Civil Eng., 69(1), 97-109. https://doi.org/10.1680/iicep.1980.2489
  17. Schueller, G.I. (1987), "A prospective study of materials based on stochastic methods", Mater. Struct., 20(4), 243-248. https://doi.org/10.1007/BF02485918
  18. Sheidaii, M.R and Abedi, K. (2001), "An investigation into the buckling behavior of the compression members using finite elements method", Int. J. Space Struct., 16(2), 85-93. https://doi.org/10.1260/0266351011495197
  19. Smith, E.A. and Epstein, H. (1980), "Hartford coliseum roof collapse: structural sequence and lesson learned", Civil Eng., ASCE, 52(4), 59-62.
  20. Thornton, C. and Lew, L. (1984), "Investigation of the causes of Hartford coliseum collapse", Proceeding of the Third International Conference on Space Structures, University Of Surrey, London.
  21. Vryzidis, I., Stefanou, G. and Papadopoulos, V. (2013), "Stochastic stability analysis of steel tubes with random initial imperfections", Finite Elem. Anal. Des., 77, 31-39. https://doi.org/10.1016/j.finel.2013.09.002
  22. Wada, A. and Wang, Z. (1992), "Influence of uncertainties on mechanical behavior of a double-layer space truss", Int. J. Space Struct., 7(3), 223-235. https://doi.org/10.1177/026635119200700306
  23. Zdenek, K. (2013), "Elastic lateral-torsional buckling of simply supported hot-rolled steel I beams with random imperfections", Procedia Eng., 57, 504-514. https://doi.org/10.1016/j.proeng.2013.04.065
  24. Zhao, J., Zhang, Y. and Lin, Y. (2014), "Study on mid-height horizontal bracing forces considering random initial geometric imperfections", J. Construct. Steel Res., 92, 55-66. https://doi.org/10.1016/j.jcsr.2013.09.005

Cited by

  1. Reliability analysis of double-layer domes with stochastic geometric imperfections vol.2, pp.2, 2015, https://doi.org/10.12989/acd.2017.2.2.133
  2. DOProC-based reliability analysis of structures vol.64, pp.4, 2015, https://doi.org/10.12989/sem.2017.64.4.413
  3. Influence of Member Length Imperfection on the Capacity of Spatial Structures vol.12, pp.None, 2018, https://doi.org/10.2174/1874149501812010481
  4. Stochastic Approach on Safe Designing of Double Layer Grid Space Structure against Member Length Imperfections vol.21, pp.3, 2015, https://doi.org/10.1007/s13296-021-00470-5