초록
작업의 효율을 높이기 위해서 대형 공장에서 개구부는 주로 개방 되어 있다. 그러나 동절기에 공장에서 난방을 하는 경우 개방되어 있는 개구부는 난방부하를 상승시키는 큰 요인이다. 때문에 공장에서는 개구부 상단에 에어커튼을 설치하여 외부의 침기를 막아 난방부하를 낮춘다. 일반적인 에어커튼의 설계 변수로는 토출 각도와, 속도, 온도 등이 존재하며 이에 대한 연구는 이미 많이 진행되었다. 하지만, 공장이라는 공간적 특수성을 고려하였을 때, 기존에 연구되지 않은 개구부로부터의 이격 거리와 토출구 폭에 대한 부분도 차단 성능에 영향을 미친다. 그 결과 에어커튼은 이격 거리가 가깝고, 토출구 폭은 넓을수록 차단 성능이 좋았다. 이격 거리가 존재하더라도 토출구 폭을 증가시키면 차단 성능이 향상되었으며, 토출구 폭을 증가시킴으로써 약 13.7%의 차단 성능의 향상을 기대할 수 있다.
In large-scale factories, there are usually openings in the building to increase the efficiency of workers. However, if the factory is heated during winter, openings significantly increase the heating load. Therefore, there is a need for air curtains to be installed at the top of openings in factories to reduce the heating load due to the cold air entering from outside. The main design variables of these air curtains are the discharge angle, speed, and temperature, etc. While there have already been many studies focusing on these design variables, the distance from the opening and the width of the discharge have not been studied even though they also affect the sealing performance. As a result, when the distance from the opening decreases and the width of the discharge increases, we realize an optimum air curtain performance. However, if the distance from the opening is about 1.5 m, by adjusting the discharge angle and the distance from the opening, the sealing performance of the air curtain is improved by 13.7%.