DOI QR코드

DOI QR Code

다양한 조건에 따른 주철 소재의 마찰/마모 특성에 관한 연구

Investigation of Friction and Wear Characteristics of Cast Iron Material Under Various Conditions

  • 투고 : 2014.11.26
  • 심사 : 2015.06.03
  • 발행 : 2015.08.01

초록

주철은 산업현장에서 중장비나 철도차량 등과 같은 다양한 기계장치의 주재료로 널리 사용된다. 이러한 기계장치의 운전 성능은 접촉 특성에 따라 크게 좌우되며 이를 개선시키기 위한 연구들이 진행되고 있다. 본 연구에서는 모래와 알루미나 입자가 주철의 마찰/마모 특성에 미치는 영향에 대해 다양한 조건에서의 미끄럼 실험을 통해 규명하였다. 입자의 크기 및 시편 온도 등을 변수로 하여 스틸 볼이 pin 으로 장착된 pin-on-reciprocator 방식의 트라이보테스터를 사용하여 실험을 진행하였다. 주사전자현미경(Scanning Electron Microscope), confocal microscope 와 3d profiler 를 이용해서 주철 시편과 스틸 볼의 마모 표면을 관찰하고 마모량을 정량적으로 측정하여 마모 특성을 파악하였다. 실험 결과 주철의 마찰/마모 특성은 입자 주입에 의해 크게 달라짐을 알 수 있었다. 또한, 주철 시편에 가해준 온도에 따라 마찰/마모 특성이 크게 달라지는 것을 확인하였다. 이 연구의 결과는 산업에서 주철 재료의 트라이볼로지 특성을 이해하는데 도움이 될 것이다.

Cast iron is widely used in fields such as the transport and heavy industries. For parts where contact damage is expected to occur, it is necessary to understand the friction and wear characteristics of cast iron. In this study, we use cast iron plates as the specimens to investigate their friction and wear characteristics. We perform various experiments using a reciprocating type tribotester. We assess the frictional characteristics by analyzing the friction coefficient values that were obtained during the sliding tests. We observe the wear surfaces of cast iron and steel balls using a scanning electron microscope, confocal microscope, and 3d profiler. We investigate the friction and wear characteristics of cast iron by injecting sand and alumina particles having various sizes. Furthermore, we estimate the effect of temperature on the friction and wear characteristics. The results obtained are expected to aid in the understanding of the tribological characteristics of cast iron in industry.

키워드

참고문헌

  1. Bathe, R., Krishna, V. S., Nikumb, S. K. and Padmanabham, G., 2014, "Laser Surface Texturing of Gray Cast Iron for Improving Tribological Behavior," Applied Physics A: Materials Science & Processing, Vol. 117, No. 1, pp. 117-123. https://doi.org/10.1007/s00339-014-8281-y
  2. Arias-Cuevasa, O., Li, Z. and Lewis, R., 2011, "A Laboratory Investigation on the Influence of the Particle Size and Slip During Sanding on the Adhesion and Wear in the Wheel-Rail Contact," Wear, Vol. 271, No. 5, pp. 14-24. https://doi.org/10.1016/j.wear.2010.10.050
  3. Wang, W. J., Zhang, H. Y., Wang, H. Y., Liu, Q. Y. and Zhu, M. H., 2011, "Study on the Adhesion Behavior of Wheel/Rail Under Oil, Water and Sanding Conditions," Wear, Vol. 271, No. 9-10, pp. 2693-2698. https://doi.org/10.1016/j.wear.2010.12.019
  4. Kaur, K. and Pandey, O. P., 2010, "Dry Sliding Wear Behavior of Zircon Sand Reinforced Al-Si Alloy," Tribology Letters, Vol. 53, No. 3, pp. 377-387.
  5. Matsumoto, K., Suda, Y., Komine, H., Nakai, T., Tomeoka, M., Shimizu, K., Tanimoto, M., Kishimoto, Y. and Fujii, T., 2005, "A Proposal of Wheel/Rail Contact Model for Friction Control," Journal of Mechanical Science and Technology, Vol. 19, No. 1, pp. 437-443. https://doi.org/10.1007/BF02916165
  6. Chen, H., Ishida, M., Namuraa, A., Baek, K. S., Nakahara, T., Leban, B. and Pau, M., 2011, "Estimation of Wheel/Rail Adhesion Coefficient under Wet Condition with Measured Boundary Friction Coefficient and Real Contact Area," Wear, Vol. 271, No. 1-2, pp. 32-39. https://doi.org/10.1016/j.wear.2010.10.022
  7. Chen, H., Ishida, M. and Nakahara, T., 2005, "Analysis of Adhesion Under Wet Conditions for Three-Dimensional Contact Considering Surface Roughness," Wear, Vol. 258, No. 7-8, pp. 1209-1216. https://doi.org/10.1016/j.wear.2004.03.031
  8. Berthier, Y., Descartes, S., Busquet, M., Niccolini, E., Desrayaud, C., Baillet, L. and Baietto-Dubourg, M. C., 2004, "The Role and Effects of the Third Body in the Wheel-Rail Interaction," Fatigue & Fracture of Engineering Materials & Structures, Vol. 27, No. 5, pp. 423-436. https://doi.org/10.1111/j.1460-2695.2004.00764.x
  9. Ohno, K., Ban, T., Obara, T. and Kawaguchi, K., 1994, "Adhesion Improvement with Jetting Ceramic Particles in High Speed Running," Railway Technical Research Institute, Quarterly Report, Vol. 35, No. 4, pp. 218-220.
  10. Wang, W. J., Liu, T. F., Wang, H. Y., Liu, Q. Y., Zhu, M. H. and Jin, W. S., 2014, "Influence of Friction Modifiers on Improving Adhesion and Surface Damage of Wheel/Rail Under Low Adhesion Condition," Tribology International, Vol. 75, pp. 16-23. https://doi.org/10.1016/j.triboint.2014.03.008
  11. Kim, K. I., Kim, C. L. and Kim, D. E., 2012, "Characterization of Durability of Coatings for Cell Phone Cover by Wear, Erosion, and Pull-off Tests," International Journal of Precision Engineering and Manufacturing, Vol. 13, No. 9, pp. 1633-1639. https://doi.org/10.1007/s12541-012-0214-0
  12. Bhandari, V. B., 2014, MACHINE DESIGN Data Book, McGraw Hill Education, India, pp. 22-24.
  13. Lee, H. N., Nakamura, H. and Kobayashi, H., 2004, "Utilization of Thermo-elasto-plastic Analysis of Welding Eigen strain for Improvement of the Bead Flush Method," Engineering Fracture Mechanics, Vol. 71, No. 15, pp. 2245-2255. https://doi.org/10.1016/S0013-7944(03)00025-0
  14. Yan, W. and Fisher, D., 2000, "Applicability of the Hertz Contact Theory to Rail-Wheel Contact Problems," Archive of Applied Mechanics, Vol. 70, No. 4, pp. 255-268. https://doi.org/10.1007/s004199900035
  15. Fischer, F. D., Daves, W. and Werner, E. A., 2003, "On the Temperature in the Wheel-Rail Rolling Contact," Fatigue & Fracture of Engineering Materials & Structures, Vol. 26, No. 10, pp. 999-1006. https://doi.org/10.1046/j.1460-2695.2003.00700.x
  16. Wong, K. C., Lu, X., Cotter, J., Eadie, D. T., Wong, P. C. and Mitchell, K. A. R., 2007, "Surface and Friction Characterization of MoS2 and WS2 Third Body Thine Films Under Simulated Wheel/Rail Rolling-Sliding Contact," Wear, Vol. 264, No. 7, pp. 526-534. https://doi.org/10.1016/j.wear.2007.04.004
  17. Descartes, S., Desrayaud, C., Niccolini, E. and Berthier, Y., 2005, "Presence and Role of the Third Body in a Wheel-Rail Contact," Wear, Vol. 258, No. 7, pp. 1081-1090. https://doi.org/10.1016/j.wear.2004.03.068
  18. Grieve, D. G., Dwyer-Joyce, R. S. and Beynon, J. H., 2001, "Abrasive Wear of Railway Track by Solid Contaminants," Journal of Rail and Rapid Transit, Vol. 215, No. 3, pp. 193-205. https://doi.org/10.1243/0954409011531512
  19. Misra, A. and Finnie, I., 1983, "An Experimental Study of Three-body Abrasive Wear," Wear, Vol. 85, No. 1, pp. 57-68. https://doi.org/10.1016/0043-1648(83)90335-6
  20. Venkatesan, K., Subramanian, C. and Summerville, E., 1997, "Three-body Abrasion of Surface Engineered Die Steel at Elevated Temperature," Wear, Vol. 203, pp. 129-138.