Computers and Concrete

  • 제16권1호
  • /
  • Pages.37-48
  • /
  • 2015
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Modeling the alkali aggregate reaction expansion in concrete

  • Zahira, Sekrane Nawal (Department of Civil Engineering, Djillali Liabes University, Civil Engineering and Environment Laboratory) ;
  • Aissa, Asroun (Department of Civil Engineering, Djillali Liabes University, Civil Engineering and Environment Laboratory)
  • 투고 : 2015.02.18
  • 심사 : 2015.06.26
  • 발행 : 2015.07.25
⟨ 이전 논문 다음 논문 ⟩

초록

Alkali aggregate reaction affects numerous civil engineering structures and causes irreversible expansion and cracking. This work aims at developing model to predict the potential expansion of concrete containing alkali-reactive aggregates. First, the paper presents the experimental results concerning the influence of particle size of an alkali-reactive aggregate on mortar expansion studied at 0.15-0.80 mm, 1.25-2.50 mm and 2.5-5.0 mm size fractions and gives data necessary for model development. Results show that no expansion was measured on the mortars using small particles (0.15-0.80 mm) while the particles (1.25-2.50 mm) gave the largest expansions. Finally, model is proposed to simulate the experimental results by studying correlations between the measured expansions and the size of aggregates and to calculate the thickness of the porous zone necessary to take again all the volume of the gel created by this chemical reaction.

키워드

참고문헌

  1. ASTM C1260-94, Standard test method for determining the potential alkali reactivity of combinations of cementious materials and aggregate (accelerated mortar-bar method), Annual Book of ASTM Standards 2002, 4(2), American Society for Testing and Materials, 1916 Race Street, Philadelphia, PA 19103.
  2. Bazant, Z.P. and Steffens, A. (2000), "Mathematical model for kinetics of alkali silica reaction in concrete", Cement. Concrete. Res., 30(3), 419-428. https://doi.org/10.1016/S0008-8846(99)00270-7
  3. Chatterji, S. and Thaulow, N. (2000), "Some fundamentals of alkali-silica reaction", Proceedings of the 11th International Conference on Alkali-Aggregate Reaction in concrete, Quebec City, Quebec.
  4. CSA A23.2-25A-00, Detection of alkali silica reactive aggregate by accelerated expansion of mortar bars. CSA A23.2-00: Methods of Test for concrete, Canadian Standards Association, Mississauga (ON).
  5. Dent-Glasser, L.S. and Kataoka, N. (1981), "The chemistry of alkali-aggregate reaction", Proceedings of the 5th International Conference on Alkali-Aggregate Reaction in concrete, Cape Town, South Africa.
  6. Diamond, S. and Thaulow, N. (1974), "A study of expansion due to alkali-silica reaction as conditioned by the grain size of the reactive aggregate", Cement. Concrete. Res., 4 (4), 591-607. https://doi.org/10.1016/0008-8846(74)90009-X
  7. Dunant, C.F. and Scrivener, K.L. (2012), "Effects of aggregate size on alkali-silica-reaction induced expansion", Cement. Concrete. Res., 42(6), 745-751. https://doi.org/10.1016/j.cemconres.2012.02.012
  8. Faiz, U.A. (2014), "Effects of Alkali solutions on corrosion durability of geopolymer concrete", Adv. Concrete. Constr., 2(2), 109-123 https://doi.org/10.12989/acc.2014.2.2.109
  9. Gao, X.X., Cyr, M., Multon, S. and Sellier, A. (2013), "A three step method for the recovery of aggregates from concrete", Constr. Build. Mater., 45, 262-269. https://doi.org/10.1016/j.conbuildmat.2013.04.003
  10. Gao, X.X., Multon, S., Cyr, M. and Sellier, A. (2012), "Alkali-silica reaction (ASR) expansion: Pessimum effect versus scale effect", Cement. Concrete. Res., 44, 25-33.
  11. Hasni, L., Gallias, Y. and Salomon, M. (1993), "Appreciation des risques d'alcali reaction dans les betons de sables", Rapport de recherche $n^{\circ}$ 41020, CEBTP, St Remyles-Chevreuses, 53.
  12. Hobbs, D.W. and Gutteridge, W.A. (1979), "Particle size of aggregate and its influence upon the expansion caused by the alkali-silica reaction", Mag. Concrete. Res., 31(109), 235-242. https://doi.org/10.1680/macr.1979.31.109.235
  13. Khater, H.M. and Abd el Gawaad, H.A. (2015), "Characterization of Alkali activated geopolymer mortar doped with MWCNT", Adv. Mater. Res., 4(1), 45-60 https://doi.org/10.12989/amr.2015.4.1.45
  14. Kuroda, T., Inoue, S., Yoshino, A. and Nishibayashi, S. (2004), "Effects of particle size grading and content of reactive aggregate on ASR expansion of mortars subjected to autoclave method", Proceedings of the 12th International Conference on Alkali-Aggregate Reaction in concrete, Beijing, China.
  15. Kuroda, T., Nishibayashi, S., Inoue, S. and Yoshino, A. (2000), "Effects of the particle size of reactive fine aggregate and accelerated test conditions on ASR expansion of mortar bar", Trans. Jap. Concrete. Ins., 22, 113-118.
  16. Lu, D., Fournier, B. and Grattan-Bellew, P.E. (2006), "Evaluation of accelerated test methods for determining alkali-silica reactivity of concrete aggregates", Cement. Concrete. Comp., 28(6), 546-554. https://doi.org/10.1016/j.cemconcomp.2006.03.001
  17. Multon, S., Cyr, M., Sellier, A., Diederich, P. and Petit, L. (2010), "Effects of aggregate size and alkali content on ASR expansion", Cement. Concrete. Res., 40(4), 508-516. https://doi.org/10.1016/j.cemconres.2009.08.002
  18. Multon, S., Cyr, M., Sellier, A., Leklou, N. and Petit, L. (2008), "Coupled effects of aggregate size and alkali content on ASR expansion", Cement. Concrete. Res., 38(3), 350-359. https://doi.org/10.1016/j.cemconres.2007.09.013
  19. Oberholster, R.E. and Davies, G. (1986), "An accelerated method for testing the potential alkali reactivity of siliceous aggregates", Cement. Concrete. Res., 16(2), 181-189. https://doi.org/10.1016/0008-8846(86)90134-1
  20. Pietruszczak, S., Ushaksaraei, R. and Gocevski, V. (2013), "Modelling of the effects of Alkali-aggregate reaction in reinforced concrete structures", Comput. Concr. Int. J., 12(5), 627-650. https://doi.org/10.12989/cac.2013.12.5.627
  21. Poyet, S. (2003), "Study of the degradation of concrete structures affected by alkali-silica reaction:Experimental approach and multi-scale numerical modeling of damage in an environment variable hydro-chemo-mechanical", Ph.D. thesis, Marne-La-Vallee University, Marne-La-Vallee.
  22. Poyet, S., Sellier, A., Capra, B., Foray, G., Torrenti, J.M., Cognon, H. and Bourdarot, E. (2007), "Chemical modelling of alkali silica reaction: influence of the reactive aggregate size distribution", Mater. Struct., 40(2), 229-239. https://doi.org/10.1617/s11527-006-9139-3
  23. Raymar, K., Topal, A. and Andic, O. (2005), "Effects of aggregate size and angularity on alkali-silica reaction", Cement. Concrete. Res., 35(11), 2165-2169. https://doi.org/10.1016/j.cemconres.2005.03.010
  24. RILEM TC191-ARP-AAR02 (2000), "Detection of potential alkali-reactivity of aggregates-the ultra-accelerated mortar-bar test", Mater. Struct., 33, 283-293. https://doi.org/10.1007/BF02479697
  25. Sanchez, L.F.M., Multon, S., Sellier, A., Cyr, M., Fournier, B. and Jolin, M. (2014), "Comparative study of chemo-mechanical modelling for alkali-silica reaction (ASR) with experimental evidences", Constr. Build. Mater., 72(15), 301-315. https://doi.org/10.1016/j.conbuildmat.2014.09.007
  26. Sellier, A., Bournazel, J.P. and Mébarki, A. (1996), "Modelling the alkali aggregate reaction within a probabilistic frame-work, in: A. Shayan (Ed.)", Proceedings of the 10th International Conference on Alkali-Aggregate Reaction, Melbourne, Australia.
  27. Wang, H. and Gillott, J.E. (1991), "Mechanisms of alkali-silica reaction and the significance of calcium hydroxide", Cement. Concrete. Res., 21(4), 647-654. https://doi.org/10.1016/0008-8846(91)90115-X
  28. Wigum, B.J. and French, W.J. (1996), "Sequential examination of slowly expanding alkami-reavtive aggregates in accelerated mortar bar testing", Mag. Concrete. Res., 48 (177), 281-292. https://doi.org/10.1680/macr.1996.48.177.281
  29. Yuksel, C., Ahari, R.S., Ahari, B.A. and Ramyar, K. (2013), "Evaluation of three test methods for determining the alkali-silica reactivity of glass aggregate", Cement. Concrete. Comp., 38, 57-64. https://doi.org/10.1016/j.cemconcomp.2013.03.002
  30. Zhang, C.A., Wang, M., Tang, B. and Wu, N. (1999), "Influence of aggregate size and aggregate size grading on ASR expansion", Cement. Concrete. Res., 29 (9), 1393-1396. https://doi.org/10.1016/S0008-8846(99)00099-X
  31. Zhang, X. and Groves, G.W. (1990), "The alkali silica reaction in OPC/silica glass mortar with particular reference to pessimum effects", Adv. Cem. Res., 3(9), 9-13. https://doi.org/10.1680/adcr.1990.3.9.9
  32. Zhongzi, X., Yang, C. and Lu, D. (1998), "Main parameters in the new test method for alkali-silica reactivity", J. Nanjing. Univ. Chem. Technol., 20(2), 1-7.

피인용 문헌

  1. Prediction models for compressive strength of concrete with Alkali-activated binders vol.17, pp.4, 2016, https://doi.org/10.12989/cac.2016.17.4.523
  2. Effectiveness of mineral additives in mitigating alkali-silica reaction in mortar vol.20, pp.6, 2015, https://doi.org/10.12989/cac.2017.20.6.705
  3. Pozzolanic properties of trachyte and rhyolite and their effects on alkali-silica reaction vol.11, pp.4, 2015, https://doi.org/10.12989/acc.2021.11.4.299