한국농공학회논문집 (Journal of The Korean Society of Agricultural Engineers)

  • 제57권4호
  • /
  • Pages.11-19
  • /
  • 2015
  • /
  • 1738-3692(pISSN)
  • /
  • 2093-7709(eISSN)
한국농공학회 (The Korean Society of Agricultural Engineers)
권호 표지
DOI QR코드

DOI QR Code

폴리프로필렌 섬유 보강 EVA 콘크리트의 압축강도 및 내구성

The Compressive Strength and Durability Properties of Polypropylene Fiber Reinforced EVA Concrete

  • Nam, Ki Sung (Dohwa Engineering Co., Ltd.) ;
  • Sung, Chan Yong (Department of Agricultural and Rural Engineering, Chungnam National University)
  • 투고 : 2015.04.01
  • 심사 : 2015.05.20
  • 발행 : 2015.07.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The important properties of EVA (ethylene vinyl acetate) redispersible polymer was waterproof, densification of internal pore space of concrete and ball bearing and micro filler. Also, the significant role of polypropylene(PP) fiber was crack control and blockade of movement for deterioration factors. The most studies for EVA were limited in the field of mortar and PP fiber reinforced concrete had been studied in the state of being restricted unit water content, rich mix and mixing much of the fiber without considering construction site. Therefore, the control mix design were applied in ready mixed concrete using 10 % fly ash of total cement weight used in batch plant. On the basis of control mix design, EVA contents ranging from 0 % to 10 % of total cement weight and PP fiber contents ranging from 0 % to 0.5 % of EVA concrete volume were used in the mix designs. The results showed the maximum compressive strength value was measured at EVA 5.0 % and PP fiber 0.1 %, the minimum water absorption ratio was at EVA 10 % and PP fiber 0 %, the durability factor for freezing and thawing resistance was at EVA 5.0 % and PP fiber 0.3 % and the minimum weight reduction ratio of resistance to sulfuric acid attack was at EVA 10 % and PP fiber 0.5 % after curing age 42days. Meanwhile, From these results, PP fiber reinforced EVA concrete would be very benefit, if each optimal mix types were used in hydraulic structures, underground utilities and agricultural structures.

키워드

참고문헌

  1. Afridi, M. U. K., Y. Ohama, M. Z. Iqbal, and K. Demura, 1995, Water retention and adhesion of powdered and aqueous polymer-modified mortars, Cement & Concrete Composities 17(2): 113-118. https://doi.org/10.1016/0958-9465(95)00007-Y
  2. Bae, S. C., and W. G. Hyung, 2013. Properties of polymer modified mortars using re-dispersible polymer powders. Journal of the Korea Institute of Building Construction 13(3): 235-241 (in Korean). https://doi.org/10.5345/JKIBC.2013.13.3.235
  3. Cho, B. S., J. H. Lee, and S. Y. Back, 2014, Comparative study on the flexural performance of concrete reinforced with polypropylene and steel fibers, Journal of the Korea Society of Civil Engineers 34(6): 1,677-1,685 (in Korea). https://doi.org/10.12652/Ksce.2014.34.6.1677
  4. Jo, Y. K., 2009. A study on the water permeability and drying shrinkage of polymer cement composites. Journal of the Korea Institute of Building Construction 9(5): 73-79 (in Korea). https://doi.org/10.5345/JKIC.2009.9.3.073
  5. Kakooei, S., H. M. Akil, M. Jamshidi, and J. Rouhi, 2012, The effects of polypropylene fibers on the properties of reinforced concrete structures, Construction and Building Materials 27(1): 73-77. https://doi.org/10.1016/j.conbuildmat.2011.08.015
  6. Kim, M. H., S. K. Oh, K. S. Bae, S. G. Park, and Y. R. Kim, 2000, A study on watertightness effect of Waterproofing admixture mixed redispersible polymer and siliceous powder, Journal of the Korea Concrete Institute 14(5): 660-667 (in Korean). https://doi.org/10.4334/JKCI.2002.14.5.660
  7. Kim., Y. I., and C. Y. Sung, 2007. Strength and watertightness properties of EVA Modified high strength concrete. Journal of the Korean Society of Agricultural Engineers 49(1): 45-54 (in Korean). https://doi.org/10.5389/KSAE.2007.49.1.045
  8. Kim, I. S., and C. Y. Sung, 2008. Compressive strength and acid-resistant of polymer concrete using redispersible polymer and blast furance slag powder. Journal of The Korean Society Agricultural Engineers 50(5): 19-27 (in Korean). https://doi.org/10.5389/KSAE.2008.50.5.019
  9. Kim, D. H., J. W. Lee, and C. G. Park, 2012. Effect of mineral admixture on bond between structural synthetic fiber and latex modified cement mortar under sulfate environments. Journal of the Korean Society of Agricultural Engineers 54(5): 25-34 (in Korean). https://doi.org/10.5389/KSAE.2012.54.5.025
  10. Kwon, M. H., H. S. Seo, J. H. Lim, and J. S, Kim, 2013, The properties of durability and strength of fiber-reinforced polymer-modified mortars using eco-friendly UM resin, journal of the Korea Concrete Institute 25(3): 313-320 (in Korean). https://doi.org/10.4334/JKCI.2013.25.3.313
  11. Noh, K. H., and C. Y. Sung, 2004. Mechanical and drying shrinkage properties of polypropylene fiber reinforced high flow concrete, Journal of the Korean Society of Agricultural Engineers 46(5): 79-85 (in Korean). https://doi.org/10.5389/KSAE.2004.46.5.079
  12. Park, S. K., J. P. Won, and C. G. Park, 2008. Strength properties and determination method of mix proportion factor of latex modified concrete. Journal of the Korean Society of Agricultural Engineers 50(5): 39-50 (in Korean). https://doi.org/10.5389/KSAE.2008.50.5.039
  13. Silva, D. A., H. R. Roman, and P. J. P. Gleize, 2002, Evidences of chemical interaction between EVA and hydrating Portland cement, Cement and Concrete Research 32: 1,383-1,390. https://doi.org/10.1016/S0008-8846(02)00805-0
  14. Silva, D. A., and P. J. M. Monteiro, 2005, ESEM analysis of polymeric film in EVA-modified cement paste, Cement and Concrete Research 35, 2,047-2,050. https://doi.org/10.1016/j.cemconres.2004.10.037
  15. Silviya, E. K., G. Unnikrishnan, S. Varghese, and J. T. Guthrie, 2012, Thermal and mechanical characterization of EVA/Banana fiber-derived cellulose composites, Journal of Applied Polymer Science 125: 786-792. https://doi.org/10.1002/app.35140
  16. Song, H. W., C. H. Lee, and K. Y. Ann, 2008. Factors influencing chloride transport in concrete structures exposed to marine environments. Journal of Cement & Concrete Composites 30(2): 113-121. https://doi.org/10.1016/j.cemconcomp.2007.09.005
  17. Sung, C. Y., 2006, Freezing and thawing properties of polypropylene fiber reinforced eco-concrete, Journal of the Korean Society of Agricultural Engineers 48(2): 59-66 (in Korean). https://doi.org/10.5389/KSAE.2006.48.2.059
  18. Sung, C. Y., and K. S. Nam, 2014. Mechanical properties and durability of abrasion of EVA concrete reinforced steel fiber, Journal of the Korean Society of Agricultural Engineers 56(5): 45-54 (in Korean). https://doi.org/10.5389/KSAE.2014.56.5.045