Earthquakes and Structures

  • 제9권1호
  • /
  • Pages.145-171
  • /
  • 2015
  • /
  • 2092-7614(pISSN)
  • /
  • 2092-7622(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Ratio of Torsion (ROT): An index for assessing the global induced torsion in plan irregular buildings

  • Stathi, Chrysanthi G. (Institute of Structural Analysis & Antiseismic Research Department of Structural Engineering, School of Civil Engineering, National Technical University) ;
  • Bakas, Nikolaos P. (Institute of Structural Analysis & Antiseismic Research Department of Structural Engineering, School of Civil Engineering, National Technical University) ;
  • Lagaros, Nikos D. (Institute of Structural Analysis & Antiseismic Research Department of Structural Engineering, School of Civil Engineering, National Technical University) ;
  • Papadrakakis, Manolis (Institute of Structural Analysis & Antiseismic Research Department of Structural Engineering, School of Civil Engineering, National Technical University)
  • 투고 : 2014.07.14
  • 심사 : 2015.04.06
  • 발행 : 2015.07.25
⟨ 이전 논문 다음 논문 ⟩

초록

Due to earthquakes, many structures suffered extensive damages that were attributed to the torsional effect caused by mass, stiffness or strength eccentricity. Due to this type of asymmetry torsional moments are generated that are imposed by means of additional shear forces developed at the vertical resisting structural elements of the buildings. Although the torsional effect on the response of reinforced concrete buildings was the subject of extensive research over the last decades, a quantitative index measuring the amplification of the shear forces developed at the vertical resisting elements due to lateral-torsional coupling valid for both elastic and elastoplastic response states is still missing. In this study a reliable index capable of assessing the torsional effect is proposed. The performance of the proposed index is evaluated and its correlation with structural response quantities like displacements, interstorey drift, base torque, shear forces and upper diaphragm's rotation is presented. Torsionally stiff, mass eccentric single-story and multistory structures, subjected to bidirectional excitation, are considered and nonlinear dynamic analyses are performed using natural records selected for three hazard levels. It was found that the proposed index provides reliable prediction of the magnitude of torsional effect for all test examples considered.

키워드

과제정보

연구 과제 주관 기관 : European Research Council

참고문헌

  1. Anagnostopoulos, S.A., Alexopoulou, Ch. and Stathopoulos, K.G. (2010), "An answer to an important controversy and the need for caution when using simple models to predict inelastic earthquake response of buildings with torsion", Earthq. Eng. Struct. Dyn., 39(5), 521-540. https://doi.org/10.1002/eqe.957
  2. Anagnostopoulos, S.A., Kyrkos, M.T. and Stathopoulos, K.G. (2015), "Earthquake induced torsion in buildings: critical review and state of the art", Earthq. Struct., 8(2), 305-377. https://doi.org/10.12989/eas.2015.8.2.305
  3. Bosco, M., Ferrara, G.A.F., Ghersi, A., Marino, E.M. and Rossi, P.P. (2015), "Seismic assessment of existing r.c. framed structures with in-plan irregularity by nonlinear static methods", Earthq. Struct., 8(2), 401-422. https://doi.org/10.12989/eas.2015.8.2.401
  4. Bosco, M., Marino, E.M. and Rossi, P.P. (2013), "An analytical method for the evaluation of the in-plan irregularity of non-regularly asymmetric buildings", Bull. Earthq. Eng., 11(5), 1423-1445. https://doi.org/10.1007/s10518-013-9438-3
  5. Chandler, A.M. and Duan, X.N. (1997), "Performance of asymmetric code-designed buildings for serviceability and ultimate limit states", Earthq. Eng. Struct. Dyn., 26(7), 717-736. https://doi.org/10.1002/(SICI)1096-9845(199707)26:7<717::AID-EQE672>3.0.CO;2-X
  6. Chandler, A.M., Duan, X.N. and Rutenberg, A. (1996), "Seismic torsional response: assumptions, controversies and research progress", Eur. Earthq. Eng., 10(1), 37-51.
  7. Cheung, V.W.-T. and Tso, W.K. (1986), "Eccentricity in irregular multistory buildings", Can. J. Civ. Eng., 13(1), 46-52. https://doi.org/10.1139/l86-007
  8. Chopra, A.K. and Goel, R.K. (1991), "Evaluation of torsional provisions in seismic codes", J. Struct. Eng., 117(12), 3762-3782. https://doi.org/10.1061/(ASCE)0733-9445(1991)117:12(3762)
  9. De La Colina, J. (1999), "Effects of torsion factors on simple non-linear systems using fully bidirectional analyses", Earthq. Eng. Struct. Dyn., 28(7), 691-706. https://doi.org/10.1002/(SICI)1096-9845(199907)28:7<691::AID-EQE834>3.0.CO;2-U
  10. De La Llera, J.C. and Chopra, A.K. (1995), "A simplified model for analysis and design of asymmetric plan buildings", Earthq. Eng. Struct. Dyn., 24(4), 573-594. https://doi.org/10.1002/eqe.4290240408
  11. De La Llera, J.C. and Chopra, A.K. (1995), "Understanding the inelastic seismic behaviour of asymmetric plan buildings", Earthq. Eng. Struct. Dyn., 24(4), 549-572. https://doi.org/10.1002/eqe.4290240407
  12. EC8-Eurocode 8 (2004), Design provisions for earthquake resistance of structures, European StandardEN1998-1.
  13. Fragiadakis, M. and Papadrakakis, M. (2008), "Modelling, analysis and reliability of seismically excited structures: Computational issues", Int. J. Comput. Meth., 5(4), 483-511. https://doi.org/10.1142/S0219876208001674
  14. Georgoussis, G.K. (2014), "Modified seismic analysis of multistory asymmetric elastic buildings and suggestions for minimizing the rotational response", Earthq. Struct., 7(1), 39-55. https://doi.org/10.12989/eas.2014.7.1.039
  15. Humar, J. and Kumar, P. (1998), "A new look at torsion design provisions in seismic building codes", 12th World Conference on Earthquake Engineering.
  16. Humar, J.L. (1984), "Design for seismic torsional forces", Can. J. Civ. Eng., 11(2), 150-163. https://doi.org/10.1139/l84-027
  17. Jeong, S.-H. and Elnashai, A.S. (2005), "Analytical assessment of an irregular RC frame for full-scale 3D pseudo-dynamic testing part I: Analytical model verification", J. Earthq. Eng., 9(1), 95-128. https://doi.org/10.1080/13632460509350535
  18. Karimiyan, S., Moghadam, A.S., Karimiyan, M. and Kashan, A.H. (2013), "Seismic collapse propagation in 6-story RC regular and irregular buildings", Earthq. Struct., 5(6), 753-779. https://doi.org/10.12989/eas.2013.5.6.753
  19. Kent, D.C. and Park, R. (1971), "Flexural members with confined concrete", J. Struct. Div., 97(7), 1969-1990.
  20. Kyrkos, M.T. and Anagnostopoulos, S.A. (2011a), "An assessment of code designed, torsionally stiff, asymmetric steel buildings under strong earthquake excitations", Earthq. Struct., 2(2), 109-126. https://doi.org/10.12989/eas.2011.2.2.109
  21. Kyrkos, M.T. and Anagnostopoulos, S.A. (2011b), "Improved earthquake resistant design of torsionally stiff asymmetric steel buildings", Earthq. Struct., 2(2), 127-147. https://doi.org/10.12989/eas.2011.2.2.127
  22. Kyrkos, T.M. and Anagnostopoulos, A.S. (2013), "Improved earthquake resistant design of eccentric steel buildings", Soil Dyn. Earthq. Eng., 47, 144-156. https://doi.org/10.1016/j.soildyn.2012.07.011
  23. Lagaros, N.D., Papadrakakis, M. and Bakas, N. (2006), "Automatic minimization of the rigidity eccentricity of 3D reinforced concrete buildings", J. Earthq. Eng., 10(3), 1-32.
  24. Lucchini, A., Monti, G. and Kunnath, S. (2009), "Seismic behavior of single-storey asymmetric-plan buildings under uniaxial excitation", Earthq. Eng. Struct. Dyn., 38(9), 1053-1070. https://doi.org/10.1002/eqe.881
  25. Makarios, T. (2008), "Practical calculation of the torsional stiffness radius of multi-storey tall buildings", Struct. Des. Tall Spec. Build., 17(1), 39-65. https://doi.org/10.1002/tal.316
  26. Makarios, T. and Anastassiadis, A. (1998a), "Real and fictitious elastic axes of multi-storey buildings: theory", Struct. Des. Tall Spec. Build., 7(1), 33-55. https://doi.org/10.1002/(SICI)1099-1794(199803)7:1<33::AID-TAL95>3.0.CO;2-D
  27. Makarios, T. and Anastassiadis, A. (1998b), "Real and fictitious elastic axes of multi-storey buildings: applications", Struct. Des. Tall Spec. Build., 7(1), 57-71. https://doi.org/10.1002/(SICI)1099-1794(199803)7:1<57::AID-TAL96>3.0.CO;2-0
  28. Marino, E.M. and Rossi, P.P. (2004), "Exact evaluation of the location of the optimum torsion axis", Struct. Des. Tall Spec. Build, 13(4), 277-290. https://doi.org/10.1002/tal.252
  29. Marusic, D. and Fajfar, P. (2005), "On the inelastic seismic response of asymmetric buildings under bi-axial excitation", Earthq. Eng. Struct. Dyn., 34(8), 943-963. https://doi.org/10.1002/eqe.463
  30. McKenna, F. and Fenves, G.L. (2001), The OpenSees Command Language Manual - Version 1.2, Pacific Earthquake Engineering Research Centre, University of California, Berkeley.
  31. Myslimaj, B. and Tso, W.K. (2005), "A Design-oriented approach to strength distribution in single-story asymmetric systems with elements having strength dependent stiffness", Earthq. Spectra, 21(1), 197-212. https://doi.org/10.1193/1.1854152
  32. Myslimaj, B. and Tso, W.K. (2002), "A strength distribution criterion for minimizing torsional response of asymmetric wall-type systems", Earthq. Eng. Struct. Dyn., 31(1), 99-120. https://doi.org/10.1002/eqe.100
  33. Palermo, M., Silvestri, S., Gasparini, G. and Trombetti, T. (2013), "Physically-based prediction of the maximum corner displacement magnification of one-storey eccentric systems", Bull. Earthq. Eng., 11(5), 1467-1491. https://doi.org/10.1007/s10518-013-9445-4
  34. Papachristidis, A., Fragiadakis, M. and Papadrakakis, M. (2010), "A 3D fiber beam-column element with shear modeling for the inelastic analysis of steel structures", Comput. Mech., 45(6), 553-572. https://doi.org/10.1007/s00466-010-0470-8
  35. Papazachos, B.C., Papaioannou, Ch.A. and Theodulidis, N.P. (1993), "Regionalization of seismic hazard in Greece based on seismic sources", Nat. Hazards, 8(1), 1-18. https://doi.org/10.1007/BF00596232
  36. Paulay, T. (1997), "Displacement-based design approach to earthquake induced torsion in ductile buildings", Eng. Struct., 9(9), 699-707.
  37. Paulay, T. (1998), "Torsional mechanisms in ductile building systems", Earthq. Eng. Struct. Dyn., 27(10), 1101-1121. https://doi.org/10.1002/(SICI)1096-9845(199810)27:10<1101::AID-EQE773>3.0.CO;2-9
  38. Perus, I. and Fajfar, P. (2005), "On the inelastic torsional response of single-storey structures under bi-axial excitation", Earthq. Eng. Struct. Dyn., 34(8), 931-941. https://doi.org/10.1002/eqe.462
  39. Poole, R.A. (1977), "Analysis for torsion employing provisions of NZRS 4203", Bull. NZ. Soc. Earthq. Eng., 10(4), 219-225.
  40. Reem, H. and Chopra, A.K. (1987), Earthquake Response of Torsionally-Coupled Buildings, Earthquake Engineering Research Centre, College of Engineering, University of California at Berkeley.
  41. Riddel, R. and Vasquez, J. (1984), "Existence of centres of resistance and torsional uncoupling of earthquake response of buildings", Proceedings of 8thWorld Conference on Earthquake Engineering, 4, 187-194.
  42. Rutenberg, A. (2002), "EAEE Task Group (TG) 8: Behaviour of irregular and complex structures-progress since 1998", Proceedings of the 12th European Conference in Earthquake Engineering, London.
  43. Scott, B.D., Park, R. and Priestley, M.J.N. (1982), "Stress-Strain behavior of concrete confined by overlapping hoops at low and high strain rates", ACI J., 79, 13-27.
  44. Smith, B.S. and Vezina, S. (1985), "Evaluation of centers of resistance in multistorey building structures", Proceedings Of Institution Of Civil Engineers, Part 2, Institution of Civil Engineers, 79(4), 623-635. https://doi.org/10.1680/iicep.1985.761
  45. Somerville, P. and Collins, N. (2002), "Ground motion time histories for the Humboldt bay bridge", Pasadena, CA, URS Corporation.
  46. Stathi, Ch.G. (2014), "Optimum design of earthquake resistant structures implementing computational methods", Ph.D. Dissertation, NTUA, Athens, Greece.
  47. Stathopoulos, K.G. and Anagnostopoulos, S.A. (2003), "Inelastic earthquake response of single-story asymmetric buildings: an assessment of simplified shear-beam models", Earthq. Eng. Struct. Dyn., 32(12), 1813-1831. https://doi.org/10.1002/eqe.302
  48. Trombetti, T.L. and Conte, J.P. (2005), "New insight into and simplified approach to seismic analysis of torsionally coupled one-story, elastic systems", J. Sound Vib., 286(1), 265-312. https://doi.org/10.1016/j.jsv.2004.10.021
  49. Tso, W.K. (1990), "Static eccentricity concept for torsional moments estimations", J. Struct. Eng., 116(5), 1199-1212. https://doi.org/10.1061/(ASCE)0733-9445(1990)116:5(1199)

피인용 문헌

  1. Design aspects for minimizing the rotational behavior of setbacks buildings vol.10, pp.5, 2016, https://doi.org/10.12989/eas.2016.10.5.1049
  2. Evaluating contradictory relationship between floor rotation and torsional irregularity coefficient under varying orientations of ground motion vol.11, pp.6, 2016, https://doi.org/10.12989/eas.2016.11.6.1027
  3. Shear forces amplification due to torsion, explicit reliance on structural topology. Theoretical and numerical proofs using the Ratio of Torsion (ROT) concept vol.61, pp.1, 2015, https://doi.org/10.12989/sem.2017.61.1.015
  4. Controlling the lateral displacement of building with external lever by using of MR damper vol.13, pp.1, 2015, https://doi.org/10.12989/eas.2017.13.1.001
  5. Torsional Response Induced by Lateral Displacement and Inertial Force vol.4, pp.None, 2018, https://doi.org/10.3389/fbuil.2018.00038
  6. The role of viscoelastic damping on retrofitting seismic performance of asymmetric reinforced concrete structures vol.19, pp.1, 2020, https://doi.org/10.1007/s11803-020-0558-x
  7. The effect of accidental eccentricities on the inelastic torsional response of buildings vol.75, pp.2, 2015, https://doi.org/10.12989/sem.2020.75.2.145
  8. Mitigating mass eccentricity effects on the rotational response of setbacks structures: An analytical solution for linear systems vol.28, pp.None, 2015, https://doi.org/10.1016/j.istruc.2020.09.062