Earthquakes and Structures

  • 제9권1호
  • /
  • Pages.29-48
  • /
  • 2015
  • /
  • 2092-7614(pISSN)
  • /
  • 2092-7622(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Comparative study of the seismic response of RC framed buildings retrofitted using modern techniques

  • Mazza, Fabio (Dipartimento di Ingegneria Civile, Universita della Calabria)
  • 투고 : 2014.11.25
  • 심사 : 2015.04.07
  • 발행 : 2015.07.25
⟨ 이전 논문 다음 논문 ⟩

초록

The main purpose of this work is to compare different criteria for the seismic strengthening of RC framed buildings in order to find the optimal combinations of these retrofitting techniques. To this end, a numerical investigation is carried out with reference to the town hall of Spilinga (Italy), an RC framed structure with an L-shaped plan built at the beginning of the 1960s. Five structures are considered, derived from the first by incorporating: carbon fibre reinforced polymer (FRP)-wrapping of all columns; base-isolation, with high-damping-laminated-rubber bearings (HDLRBs); added damping, with hysteretic damped braces (HYDBs); FRP-wrapping of the first storey columns combined with base-isolation or added damping. A three-dimensional fibre model of the primary and retrofitted structures is considered; bilinear and trilinear laws idealize, respectively, the behaviour of the HYDB, providing that the buckling be prevented, and the FRP-wrapping, without resistance in compression, while the response of the HDLRB is simulated by using a viscoelastic linear model. The effectiveness of the retrofitting solutions is tested with nonlinear dynamic analyses based on biaxial accelerograms, whose response spectra match those in the Italian seismic code.

키워드

참고문헌

  1. Balsamo, A., Colombo, A., Manfredi, G., Negro, P. and Prota, A. (2005), "Seismic behaviour of a full-scale RC frame repaired using CFRP laminates", Eng. Struct., 27(5), 769-780. https://doi.org/10.1016/j.engstruct.2005.01.002
  2. Baratta, A. and Corbi, I. (2012), "FRP composited retrofitting for protection of monumental and ancient constructions", Open Constr. Build. Technol. J., 6, 361-367. https://doi.org/10.2174/1874836801206010361
  3. Baratta, A., Corbi, I., Corbi, O., Barros, R.C. and Bairrao, R. (2012), "Shaking table experimental researches aimed at the protection of structures subject to dynamic loading", Open Constr. Build. Technol. J., 6, 355-360. https://doi.org/10.2174/1874836801206010355
  4. Calvi, G.M. (2013), "Choices and criteria for seismic strengthening", J. Earthq. Eng., 17(6), 769-802. https://doi.org/10.1080/13632469.2013.781556
  5. Christopoulos, C. and Filiatrault, A. (2006), Principles of passive supplemental damping and seismic isolation, IUSS Press, Istituto Universitario di Studi Superiori di Pavia, Italy.
  6. CNR-DT 200 (2004), Guide for the design and construction of externally bonded FRP systems for strengthening existing structures, National Research Council, Advisory Committee on technical recommendations for construction.
  7. Di Ludovico, M., Prota, A., Manfredi, G. and Cosenza, E. (2008), "Seismic strengthening of an underdesigned rc structure with FRP", Earthq. Eng. Eng. Vib., 37, 141-162.
  8. Eurocode 8 (2004), Design of Structures for Earthquake Resistance - Part 3: Assessment and retrofitting of buildings, C.E.N., European Committee for Standardization.
  9. FEMA 356, Federal Emergency Management Agency (2000), Prestandard and commentary for the seismic rehabilitation of buildings, American Society of Civil Engineers, Reston, Virginia.
  10. Ferracuti, B., Savoia, M., Pinho, R. and Francia, R. (2006), "Pushover analyses of FRP retrofitted RC frames", First ECEES, Geneva, Switzerland.
  11. Filippou, F.C., Popov, E.P. and Bertero, V.V. (1983), "Modelling of R/C joints under cyclic excitations", J. Struct. Eng., 109(11), 2666-2684. https://doi.org/10.1061/(ASCE)0733-9445(1983)109:11(2666)
  12. Gasparini, D. and Vanmarcke, E. (1976), "Simulated earthquake motions compatible with prescribed response spectra", Massachusetts Institute of Technology, Department of Civil Engineering, USA.
  13. Iervolino, I., Maddaloni, G. and Cosenza, E. (2008), "Eurocode 8 compliant record sets for seismic analysis of structures", J. Earthq. Eng., 12(1), 54-90. https://doi.org/10.1080/13632460701457173
  14. Mainstone, R.J. (1974), "Supplementary note on the stiffness and strength of infilled frames", Current Paper CP13/74, Building Research Establishment, London.
  15. Mander, J.B., Priestley, M.J.N. and Park, R. (1988), "Theoretical stress-strain model for confined concrete", J. Struct. Eng., ASCE, 114(8), 1804-1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804)
  16. Martinez-Rueda, J.E. and Elnashai, A.S. (1997), "Confined concrete model under cyclic load", Mater. Struct., 30(197), 139-147. https://doi.org/10.1007/BF02486385
  17. Mazza, F. (2014), "Modeling and nonlinear static analysis of reinforced concrete framed buildings irregular in plan", Eng. Struct., 80, 98-108. https://doi.org/10.1016/j.engstruct.2014.08.026
  18. Mazza, F. and Vulcano, A. (2007), "Control of the along-wind response of steel framed buildings by using viscoelastic or friction dampers", Wind Struct., 10(3), 233-247. https://doi.org/10.12989/was.2007.10.3.233
  19. Mazza, F. and Vulcano, A. (2008a), "Displacement-based seismic design procedure for framed buildings with dissipative braces. Part I: Theoretical formulation", In 2008 Seismic Engineering International Conference commemorating the 1908 Messina and Reggio Calabria Earthquake (MERCEA08), Reggio Calabria (Italy), American Institute of Physics Conference Proceedings, USA.
  20. Mazza, F. and Vulcano, A. (2008b), "Displacement-based seismic design procedure for framed buildings with dissipative braces. Part II: Numerical results", In 2008 Seismic Engineering International Conference commemorating the 1908 Messina and Reggio Calabria Earthquake (MERCEA08), Reggio Calabria (Italy), American Institute of Physics Conference Proceedings, USA.
  21. Mazza, F. and Vulcano A. (2011), "Sistemi di controllo passivo delle vibrazioni. Progettazione sismoresistente di edifici in cemento armato", Citta Studi Edizioni, Novara (Italy), 11, 525-575. (in Italian)
  22. Mazza, F. and Vulcano, A. (2012), "Effects of near-fault ground motions on the nonlinear dynamic response of base-isolated RC framed buildings", Earthq. Eng. Struct. Dyn., 41(2), 211-232. https://doi.org/10.1002/eqe.1126
  23. Mazza, F. and Vulcano, A. (2013), "Nonlinear seismic analysis to evaluate the effectiveness of damped braces", Int. J. Mech., 7(3), 251-261.
  24. Mazza, F. and Vulcano, A. (2014a), "Design of hysteretic damped braces to improve the seismic performance of steel and RC framed structures", Int. J. Earthq. Eng., 31(1), 1-12.
  25. Mazza, F. and Vulcano, A. (2014b), "Equivalent viscous damping for displacement-based seismic design of hysteretic damped braces for retrofitting framed buildings", Bull. Earthq. Eng., 12(6), 2797-2819. https://doi.org/10.1007/s10518-014-9601-5
  26. Mazza, F., Vulcano, A. and Mazza, M. (2012), "Nonlinear dynamic response of rc buildings with different base-isolation systems subjected to horizontal and vertical components of near-fault ground motions", Open Constr. Build. Technol. J., 6, 373-383. https://doi.org/10.2174/1874836801206010373
  27. Menegotto, M. and Pinto, P.E. (1973), "Method of analysis for cyclically loaded reinforced concrete plane frames including changes in geometry and nonelastic behavior of elements under combined normal force and bending", In IABSE Symposium on Resistance and Ultimate Deformability of Structures Acted on by Well Defined Repeated Loads, Lisbon.
  28. Monti, G. and Nuti, C. (1992), "Nonlinear cyclic behaviour of reinforcing bars including buckling", J. Struct. Eng., 118(12), 3268-3284. https://doi.org/10.1061/(ASCE)0733-9445(1992)118:12(3268)
  29. Mpampatsikos, V., Nascimbene, R. and Petrini, L. (2008), "A critical review of the RC frame existing building assessment procedure according to Eurocode 8 and Italian seismic code", J. Earthq. Eng., 12(S1), 52-82. https://doi.org/10.1080/13632460801925020
  30. Naeim, F. and Kelly, J.M. (1999), Design of seismic isolated structures: from theory to practice, John Wiley & Sons Ltd., New York, USA.
  31. Oliveto, G. and Marletta, M. (2005), "Seismic retrofitting of reinforced concrete buildings using traditional and innovative techniques", ISET J. Earthq. Technol., 42(2-3), 21-46.
  32. Ponzo, F.C., Di Cesare, A., Nigro, D., Vulcano, A., Mazza, F., Dolce, M. and Moroni, C. (2012), "JET-PACS project: dynamic experimental tests and numerical results obtained for a steel frame equipped with hysteretic damped chevron braces", J. Earthq. Eng., 16(5), 662-685. https://doi.org/10.1080/13632469.2012.657335
  33. Romao, X., Delgado, R. and Costa, A. (2010), "Practical aspects of demand and capacity evaluation of RC members in the context of EC8-3", Earthq. Eng. Struct. Dyn., 39(5), 473-499. https://doi.org/10.1002/eqe.953
  34. Royal Decree-Law No. 640 (1935), New text of the Technical Building Regulations, with special prescriptions for localities affected by earthquakes 1935. (in Italian)
  35. Royal Decree-Law No. 2105 (1937), Technical Building Regulations, with special prescriptions for localities affected by earthquakes. (in Italian)
  36. Royal Decree-Law No. 2229 (1939), Regulations for the construction of not reinforced and reinforced buildings 1939. (in Italian)
  37. SeismoStruct (2010), A computer program for static and dynamic nonlinear analysis of framed structures, available from URL: http//www.seismosoft.com.
  38. Sorace, S. and Terenzi, G. (2008), "Seismic protection of frame structures by fluid viscous damped braces", J. Struct. Eng., ASCE, 134(1), 45-55. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:1(45)
  39. NTC08 (2008), Technical Regulations for the Constructions, Italian Ministry of the Infrastructures. (in Italian)
  40. Thermou, G.E. and Elnashai, A.S. (2006), "Seismic retrofit schemes for rc structures and local-global consequences", Prog. Struct. Eng. Mater., 8(1), 1-15. https://doi.org/10.1002/pse.208
  41. Tirca, L.D., Foti, D. and Diaferio, M. (2003), "Response of middle-rise steel frames with and without passive dampers to near-field ground motions", Eng. Struct., 25(2), 69-179. https://doi.org/10.1016/S0141-0296(02)00119-0

피인용 문헌

  1. Nonlinear analysis of r.c. framed buildings retrofitted with elastomeric and friction bearings under near-fault earthquakes vol.28, pp.5-6, 2015, https://doi.org/10.1007/s11589-015-0133-0
  2. Effectiveness of damped braces to mitigate seismic torsional response of unsymmetric-plan buildings vol.85, 2017, https://doi.org/10.1016/j.ymssp.2016.09.003
  3. Sustainable retrofit design of RC frames evaluated for different seismic demand vol.9, pp.6, 2015, https://doi.org/10.12989/eas.2015.9.6.1337
  4. Nonlinear dynamic behavior of base-isolated buildings with the friction pendulum system subjected to near-fault earthquakes vol.45, pp.3, 2017, https://doi.org/10.1080/15397734.2016.1277740
  5. Nonlinear seismic analysis of r.c. framed buildings with setbacks retrofitted by damped braces vol.126, 2016, https://doi.org/10.1016/j.engstruct.2016.07.055
  6. Nonlinear seismic analysis of irregular r.c. framed buildings base-isolated with friction pendulum system under near-fault excitations vol.90, 2016, https://doi.org/10.1016/j.soildyn.2016.08.028
  7. Effects of near-fault ground motions on the nonlinear behaviour of reinforced concrete framed buildings vol.28, pp.4, 2015, https://doi.org/10.1007/s11589-015-0128-x
  8. Existing prefab R/C industrial buildings: Seismic assessment and supplemental damping-based retrofit vol.94, 2017, https://doi.org/10.1016/j.soildyn.2017.01.023
  9. Comparative experimental assessment of seismic rehabilitation with CFRP strips and sheets on RC frames vol.10, pp.3, 2016, https://doi.org/10.12989/eas.2016.10.3.613
  10. Seismic vulnerability and retrofitting by damped braces of fire-damaged r.c. framed buildings vol.101, 2015, https://doi.org/10.1016/j.engstruct.2015.07.027
  11. Static vulnerability of an existing r.c. structure and seismic retrofitting by CFRP and base-isolation: A case study vol.84, 2016, https://doi.org/10.1016/j.soildyn.2016.01.010
  12. Seismic behavior of RC building structures designed according to current codes vol.7, 2016, https://doi.org/10.1016/j.istruc.2016.04.001
  13. Wind and earthquake dynamic responses of fire-exposed steel framed structures vol.78, 2015, https://doi.org/10.1016/j.soildyn.2015.08.005
  14. Identification of the Response of a Controlled Building Structure Subjected to Seismic Load by Using Nonlinear System Models vol.6, pp.12, 2016, https://doi.org/10.3390/app6100301
  15. Nonlinear seismic analysis of unsymmetric-plan structures retrofitted by hysteretic damped braces vol.14, pp.4, 2016, https://doi.org/10.1007/s10518-016-9873-z
  16. Dynamic Response of Steel Framed Structures Fire-Retrofitted with Viscoelastic-Damped Braces vol.15, pp.8, 2017, https://doi.org/10.1007/s40999-016-0134-y
  17. Retrofit Design Methodology for Substandard R.C. Buildings with Torsional Sensitivity 2017, https://doi.org/10.1080/13632469.2016.1277569
  18. Reliability-based design of semi-rigidly connected base-isolated buildings subjected to stochastic near-fault excitations vol.11, pp.4, 2016, https://doi.org/10.12989/eas.2016.11.4.701
  19. Energy-Based Design Criterion of Dissipative Bracing Systems for the Seismic Retrofit of Frame Structures vol.8, pp.2, 2018, https://doi.org/10.3390/app8020268
  20. Combinational optimization for shaping discrete tensile boost elements in continuum structures vol.229, pp.9, 2018, https://doi.org/10.1007/s00707-018-2184-5
  21. Nonlinear response of r.c. framed buildings retrofitted by different base-isolation systems under horizontal and vertical components of near-fault earthquakes vol.12, pp.1, 2015, https://doi.org/10.12989/eas.2017.12.1.135
  22. Seismic retrofitting of a tower with shear wall in UHPC based dune sand vol.12, pp.6, 2017, https://doi.org/10.12989/eas.2017.12.6.591
  23. Performance of RC moment frames with fixed and hinged supports under near-fault ground motions vol.13, pp.1, 2017, https://doi.org/10.12989/eas.2017.13.1.089
  24. Study on seismic strengthening of railway bridge pier with CFRP and concrete jackets vol.15, pp.3, 2015, https://doi.org/10.12989/eas.2018.15.3.275
  25. Seismic retrofitting of gravity-loads designed r.c. framed buildings combining CFRP and hysteretic damped braces vol.17, pp.6, 2019, https://doi.org/10.1007/s10518-019-00593-5
  26. Advanced Seismic Retrofit of a Mixed R/C-Steel Structure vol.9, pp.12, 2015, https://doi.org/10.3390/buildings9120241
  27. Influence of infill walls on modal expansion of distribution of effective earthquake forces in RC frame structures vol.18, pp.4, 2015, https://doi.org/10.12989/eas.2020.18.4.437
  28. Activation control extension of a design method of fluid viscous dissipative bracing systems vol.18, pp.8, 2015, https://doi.org/10.1007/s10518-020-00849-5
  29. Seismic resilience evaluation of base-isolated RC buildings using a loss-recovery approach vol.18, pp.10, 2015, https://doi.org/10.1007/s10518-020-00895-z
  30. Seismic Behavior of Plan and Vertically Irregular Structures: State of Art and Future Challenges vol.22, pp.2, 2015, https://doi.org/10.1061/(asce)nh.1527-6996.0000440