Steel and Composite Structures

  • 제19권1호
  • /
  • Pages.191-208
  • /
  • 2015
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Damage detection using finite element model updating with an improved optimization algorithm

  • Xu, Yalan (School of Electronic & Mechanical Engineering, Xidian University) ;
  • Qian, Yu (School of Electronic & Mechanical Engineering, Xidian University) ;
  • Song, Gangbing (Department of Mechanical Engineering, University of Houston) ;
  • Guo, Kongming (Department of Mechanical Engineering, University of Houston)
  • 투고 : 2014.04.15
  • 심사 : 2014.12.30
  • 발행 : 2015.07.25
⟨ 이전 논문 다음 논문 ⟩

초록

The sensitivity-based finite element model updating method has received increasing attention in damage detection of structures based on measured modal parameters. Finding an optimization technique with high efficiency and fast convergence is one of the key issues for model updating-based damage detection. A new simple and computationally efficient optimization algorithm is proposed and applied to damage detection by using finite element model updating. The proposed method combines the Gauss-Newton method with region truncation of each iterative step, in which not only the constraints are introduced instead of penalty functions, but also the searching steps are restricted in a controlled region. The developed algorithm is illustrated by a numerically simulated 25-bar truss structure, and the results have been compared and verified with those obtained from the trust region method. In order to investigate the reliability of the proposed method in damage detection of structures, the influence of the uncertainties coming from measured modal parameters on the statistical characteristics of detection result is investigated by Monte-Carlo simulation, and the probability of damage detection is estimated using the probabilistic method.

키워드

참고문헌

  1. Bakir, P.G., Reynders, E. and Roeck, G.D. (2007), "Sensitivity-based finite element model updating using constrained optimization with a trust region algorithm", J. Sound Vib., 305(1-2), 211-225. https://doi.org/10.1016/j.jsv.2007.03.044
  2. Carden, E. and Fanning, P. (2004), "Vibration based condition monitoring: a review", Struct. Health Monit., 3(4), 355-377. https://doi.org/10.1177/1475921704047500
  3. Cawley, P. and Adams, R.D. (1979), "The location of defects in structures from measurements of natural frequencies", J. Strain Anal. Eng. Des., 14(2), 49-57. https://doi.org/10.1243/03093247V142049
  4. Chakraborty, S. and Sen, A. (2014), "Adaptive response surface based efficient finite element model updating", Finite Elem. Anal. Des., 80, 33-40. https://doi.org/10.1016/j.finel.2013.11.002
  5. Chellini, G., Roeck, G.D., Nardini, L. and Salvatore, W. (2010), "Damage analysis of a steel concrete composite frame by finite element model updating", J. Constr. Steel Res., 66(3), 398-411. https://doi.org/10.1016/j.jcsr.2009.10.004
  6. Doebling, S.W., Farrar, C.R. and Prime, M.B. (1998), "A summary review of vibration-based damage identification methods", Shock Vib. Digest, 30(2), 91-105. https://doi.org/10.1177/058310249803000201
  7. Fang, S.E., Perera, R. and Roeck, G.D. (2008), "Damage identification of a reinforced concrete frame by finite element model updating using damage parameterization", J. Sound Vib., 313(3-5), 544-559. https://doi.org/10.1016/j.jsv.2007.11.057
  8. Friswell, M.I. and Mottershead, J.E. (1995), Finite Element Model Updating in Structural Dynamics, Kluwer Academic, The Netherlands.
  9. Gola, M.M., Somae, A. and Botto, D. (2001), "On theoretical limits of dynamic model updating using a sensitivity-based approach", J. Sound Vib., 244(4), 583-595. https://doi.org/10.1006/jsvi.2000.3491
  10. Jaishi, B. and Ren, W.X. (2005), "Structural finite element model updating using ambient vibration test results", J. Struct. Eng., 131(4), 617-628. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:4(617)
  11. Jaishi, B. and Ren, W.X. (2006), "Damage detection by finite element model updating using modal flexibility residual", J. Sound Vib., 290(1-2), 369-387. https://doi.org/10.1016/j.jsv.2005.04.006
  12. Jaishi, B. and Ren, W.X. (2007), "Finite element model updating based on eigenvalue and strain energy residuals using multiobjective optimization technique", Mech. Syst. Signal Pr., 21(5), 2295-2317. https://doi.org/10.1016/j.ymssp.2006.09.008
  13. Kosmatka, R. and Ricles, J. (1999), "Damage detection in structures by modal vibration characterization", J. Struct. Eng., 125(12), 1384-1392. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:12(1384)
  14. Link, M. (1999), "Updating of analytical models-review of numerical procedures and application aspects", Proceedings of the Structural Dynamics Forum SD2000, Los Alamos, NM, USA.
  15. Meruane, V. and Heylen, W. (2011), "An hybrid real genetic algorithm to detect structural damage using modal properties", Mech. Syst. Signal Pr., 25(5), 1559-1573. https://doi.org/10.1016/j.ymssp.2010.11.020
  16. Mottershead, J.E., Link, M. and Friswell, M.I. (2011), "The sensitivity method infinite element model updating: A tutorial", Mech. Syst. Signal Pr., 25, 2275-2296. https://doi.org/10.1016/j.ymssp.2010.10.012
  17. Natke, H. (1998), "Problems of model updating procedures: a perspective resumption", Mech. Syst. Signal Pr., 12(1), 65-74. https://doi.org/10.1006/mssp.1997.0134
  18. Qiu, S.Q. and Chen, Z.W. (2012), "A new penalty-free-type algorithm based on trust region techniques", Appl. Math. Comput., 218(22), 11089-11099. https://doi.org/10.1016/j.amc.2012.04.065
  19. Ren, W.X. and Chen, H.B. (2010), "Finite element model updating in structural dynamics by using the response surface method", Eng. Struct., 32(8), 2455-2465. https://doi.org/10.1016/j.engstruct.2010.04.019
  20. Reynders, E., Teughels, A. and Roeck, G.D. (2010), "Finite element model updating and structural damage identification using OMAX data", Mech. Syst. Signal Pr., 24(5), 1306-1323. https://doi.org/10.1016/j.ymssp.2010.03.014
  21. Ribeiro, D., Calcada, R. and Delgado, R. (2012), "Finite element model updating of a bowstring-arch railway bridge based on experimental modal parameters", Eng. Struct., 40, 413-435. https://doi.org/10.1016/j.engstruct.2012.03.013
  22. Shi, Z., Law, S. and Zhang, L. (2000), "Damage localization by directly using incomplete mode shapes", J. Eng. Mech., 126(6), 656-660. https://doi.org/10.1061/(ASCE)0733-9399(2000)126:6(656)
  23. Shi, Z.J. and Xu, Z.W. (2009), "The convergence of subspace trust region methods", J. Comput. Appl. Math., 231(1), 365-377. https://doi.org/10.1016/j.cam.2009.02.100
  24. Sipple, J.D. and Sanayei, M. (2014), "Finite element model updating of the UCF grid benchmark using measured frequency response functions", Mech. Syst. Signal Pr., 46(1), 179-190. https://doi.org/10.1016/j.ymssp.2014.01.008
  25. Shiradhonkar, S.R. and Shrikhande, M. (2011), "Seismic damage detection in a building frame via finite element model updating", Comput. Struct., 89(23-24), 2425-2438. https://doi.org/10.1016/j.compstruc.2011.06.006
  26. Tu, Z.G. and Lu, Y. (2008), "FE model updating using artificial boundary conditions with genetic algorithms", Comput. Struct., 86(7-8), 714-727. https://doi.org/10.1016/j.compstruc.2007.07.005
  27. Yang, Y.B. and Chen, Y.J. (2009), "A new direct method for updating structural models based on measured modal data", Eng. Struct., 31(1), 32-42. https://doi.org/10.1016/j.engstruct.2008.07.011
  28. Zhang, Q., Chang, C. and Chang, T. (2000), "Finite element model updating for structures with parametric constraints", Earthquake Eng. Struct. Dyn., 29 (7), 927-944. https://doi.org/10.1002/1096-9845(200007)29:7<927::AID-EQE955>3.0.CO;2-4

피인용 문헌

  1. Statistical Identification of Parameters for Damaged FGM Structures with Material Uncertainties in Thermal Environment vol.2018, pp.1099-0526, 2018, https://doi.org/10.1155/2018/9034865
  2. Damage identification in laminated composite plates using a new multi-step approach vol.29, pp.1, 2018, https://doi.org/10.12989/scs.2018.29.1.139
  3. Crack identification in Timoshenko beam under moving mass using RELM vol.28, pp.3, 2015, https://doi.org/10.12989/scs.2018.28.3.279
  4. A Multi-Model Based Approach for the Detection of Subtle Structural Damage Considering Environmental Variability vol.20, pp.3, 2020, https://doi.org/10.1142/s0219455420500388
  5. A New Model Updating Procedure for Reliability-Based Damage and Load Identification of Railway Bridges vol.24, pp.3, 2015, https://doi.org/10.1007/s12205-020-0641-x