Steel and Composite Structures

  • 제19권1호
  • /
  • Pages.21-41
  • /
  • 2015
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Push-out tests and bond strength of rectangular CFST columns

  • Qu, Xiushu (School of Civil and Transportation Engineering, Beijing University of Civil Engineering and Architecture) ;
  • Chen, Zhihua (School of Civil Engineering, Tianjin University) ;
  • Nethercot, David A. (Department of Civil and Environmental Engineering, South Kensington Campus, Imperial College London) ;
  • Gardner, Leroy (Department of Civil and Environmental Engineering, South Kensington Campus, Imperial College London) ;
  • Theofanous, Marios (School of Civil Engineering, University of Birmingham)
  • 투고 : 2013.08.15
  • 심사 : 2014.12.18
  • 발행 : 2015.07.25
⟨ 이전 논문 다음 논문 ⟩

초록

Push-out tests have been conducted on 18 rectangular concrete-filled steel tubular (CFST) columns with the aim of studying the bond behaviour between the steel tube and the concrete infill. The obtained load-slip response and the distribution of the interface bond stress along the member length and around the cross-section for various load levels, as derived from measured axial strain gradients in the steel tube, are reported. Concrete compressive strength, interface length, cross-sectional dimensions and different interface conditions were varied to assess their effect on the ultimate bond stress. The test results indicate that lubricating the steel-concrete interface always had a significant adverse effect on the interface bond strength. Among the other variables considered, concrete compressive strength and cross-section size were found to have a pronounced effect on the bond strength of non-lubricated specimens for the range of cross-section geometries considered, which is not reflected in the European structural design code for composite structures, EN 1994-1-1 (2004). Finally, based on nonlinear regression of the test data generated in the present study, supplemented by additional data obtained from the literature, an empirical equation has been proposed for predicting the average ultimate bond strength for SHS and RHS filled with normal strength concrete.

키워드

참고문헌

  1. Aly, T., Elchalakani, M., Thayalan, P. and Patnaikuni, I. (2010), "Incremental collapse threshold for push-out resistance of circular concrete filled steel tubular columns", J. Construct. Steel Res., 66(1), 11-18. https://doi.org/10.1016/j.jcsr.2009.08.002
  2. Broderick, B.M., Goggins, J.M. and Elghazouli, A.Y. (2005), "Cyclic performance of steel and composite bracing members", J. Construct. Steel Res., 61(4), 493-514. https://doi.org/10.1016/j.jcsr.2004.09.006
  3. Cai, S.H. (2003), Modern Steel Tube Confined Concrete Structures, China Communication Press, Beijing, China.
  4. Chen, Z.H., Qu, X.S., Wang, X.D., Sun, R.R. and Li, L.M. (2009), "Experimental Study on the Interface bearing capacity on concrete-filled square steel tube", J. Harbin Inst. Technol., 41(Sup 2), 27-32. [In Chinese]
  5. EN 1992-1-1 (2004), Design of concrete structures-Part 1-1: General rules and rules for buildings, CEN.
  6. EN 1994-1-1 (2004), Eurocode 4: Design of composite steel andconcrete structures-Part 1.1: General rules and rules for buildings, CEN.
  7. Espinos, A., Gardner, L., Romero, M.L. and Hospitaler, A. (2011), "Fire behaviour of concrete filled elliptical steel columns", Thin-Wall. Struct., 49(2), 239-255. https://doi.org/10.1016/j.tws.2010.10.008
  8. GB50152-92 (1992), Standard methods for testing of concrete structures; Chinese Standard, Beijing, China.
  9. GB/T 228-2002 (2002), Metallic materials-Tensile testing at ambient temperature; Chinese Standard, Beijing, China.
  10. Giakoumelis, G. and Lam, D. (2004), "Axial capacity of concrete-filled tube columns", J. Construct. Steel Res., 60(7), 1049-1068. https://doi.org/10.1016/j.jcsr.2003.10.001
  11. Gourley, B.C., Tort, C., Denavit, M.D., Schiller, P.H. and Hajjar, J.F. (2008), "A synopsis of studies of the monotonic and cyclic behavior of concrete-filled steel tube members, connections and frames", Report No. NSEL-008; Newmark Structural Engineering Laboratory, Department of Civil and Environmental Engineering, University of Illinois at Urbana-Champaign, Champaign, IL, USA.
  12. Han, L.-H. and Yang, Y.-F. (2001), "Influence of concrete compaction on the behavior of concrete filled steel tubes with rectangular secrions", Adv. Struct. Eng., 4(2), 93-100. https://doi.org/10.1260/1369433011502381
  13. Kilpatrick, A.E. and Rangan, B.V. (1999), "Influence of interfacial shear transfer on behavior of concretefilled steel tubular columns", Struct. J., ACI, 96(4), 642-648.
  14. Lam, D. and Gardner, L. (2008), "Structural design of stainless steel concrete filled columns", J. Construct. Steel Res., 64 (11), 1275-1282. https://doi.org/10.1016/j.jcsr.2008.04.012
  15. Morishita, Y., Tomii, M. and Yoshimura, K. (1979a), "Experimental studies on bond strength in concrete filled circular steel tubular columns subjected to axial loads", Trans. Japan Concrete Inst., 1, 351-358.
  16. Morishita, Y., Tomii, M. and Yoshimura, K. (1979b), "Experimental studies on bond strength in concrete filled square and octagonal steel tubular columns subjected to axial loads", Trans. Japan Concrete Inst., 1, 359-366.
  17. O'Shea, M.D. and Bridge, R.Q. (2000), "Design of circular concrete filled thin-walled steel tubes", J. Struct. Eng., ASCE, 126(11), 1295-1303. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:11(1295)
  18. Packer, J.A. and Henderson, J.E. (2003), Hollow Structural Section Connections and Trusses-A Design Guide, Canadian Institute of Steel Construction (CISC), Toronto, Canada.
  19. Parsley, M.A., Yura, J.A. and Jirsa, J.O. (2000), Push-out behavior of rectangular concrete-filled steel tubes, Composite and Hybrid Systems; ACI SP-196, ACI, Farmington Hills, MI, USA.
  20. Petrus, C., Hamid, H.A., Ibrahim, A. and Nyuin, J.D. (2011), "Bond strength in concrete filled built-up steel tube columns with tab stiffeners", Can. J. Civil Eng., 38(6), 627-637. https://doi.org/10.1139/l11-030
  21. Qu, X., Chen Z., Nethercot, D.A., Gardner, L. and Theofanous, M. (2013), "Load-reversed push-out tests on rectangular CFST columns", J. Construct. Steel Res., 81, 35-43. https://doi.org/10.1016/j.jcsr.2012.11.003
  22. Roeder, C.W., Cameron, B. and Brown, C.B. (1999), "Composite action in concrete filled tubes", J. Struct. Eng., ASCE, 125(5), 477-484. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:5(477)
  23. Shakir-Khalil, H. (1993a), "Push-out strength of concrete-filled steel hollow sections", Struct. Eng., 71(13), 230-233.
  24. Shakir-Khalil, H. (1993b), "Resistance of concrete-filled steel tubes to push out forces", Struct. Eng., 71(13), 234-243.
  25. Shakir-Khalil, H. and Hassan, N.K.A. (1994), "Push-out resistance of concrete-filled tubes", Proceedings of the 6th International Symposium on Tubular Structures, Melbourne, Australia, December, pp. 285-291.
  26. Shanmugam, N.E. and Lakshmi, B. (2001), "State of the art report on steel-concrete composite columns", J. Construct. Steel Res., 57(10), 1041-1080. https://doi.org/10.1016/S0143-974X(01)00021-9
  27. Sheehan, T., Dai, X.H., Chan, T.M. and Lam, D. (2012), "Structural response of concrete-filled elliptical steel hollow sections under eccentric compression", Eng. Struct., 45, 314-323. https://doi.org/10.1016/j.engstruct.2012.06.040
  28. Tao, Z., Han, L.H., Uy, B. and Chen, X. (2011), "Post-fire bond between the steel tube and concrete in concrete-filled steel tubular columns", J. Construct. Steel Res., 67(3), 484-496. https://doi.org/10.1016/j.jcsr.2010.09.006
  29. Tomii, M., Yoshimura, K. and Morishita, Y. (1980a), "A method of improving bond strength in between steel tube and concrete core cast in circular steel tubular columns", Trans. Japan Concrete Inst., 2, 319-326.
  30. Tomii, M., Yoshimura, K. and Morishita, Y. (1980b), "A method of improving bond strength in between steel tube and concrete core cast in square and octagonal steel tubular columns", Trans. Japan Concrete Inst., 2, 327-334.
  31. Uy, B. (1998), "Local and post-local buckling of concrete filled steel welded box columns", J. Construct. Steel Res., 47(1-2), 47-72. https://doi.org/10.1016/S0143-974X(98)80102-8
  32. Uy, B. (2001), "Static long-term effects in short concrete filled steel box columns under sustained loading", ACI Struct. J., 98(1), 96-104.
  33. Uy, B., Tao, Z. and Han, L.-H. (2011), "Behaviour of short and slender concrete-filled stainless steel tubular columns", J. Construct. Steel Res., 67(3), 360-378. https://doi.org/10.1016/j.jcsr.2010.10.004
  34. Virdi, K.S. and Dowling, P.J. (1975), "Bond strength in concrete filled circular steel tubes", Composite columns, CESLIC Report; CC11, Engineering Structures Laboratories, Civil Engineering Department, Imperial College London, London, UK.
  35. Wang, Y. and Kodur, V. (2000), "Research toward the use of unprotected steel structures", J. Struct. Eng., ASCE, 126(12), 1442-1450. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:12(1442)
  36. Webb, J. and Peyton, J.J. (1990), "Composite concrete filled steel tube columns", Proceedings of the 2nd National Structures Conference, The Institution of Engineers Australian, Adelaide, Australia, pp. 181-185.
  37. Xu, C., Chengkui, H., Decheng, J. and Yuancheng, S. (2009), "Push-out test of pre-stressing concrete filled circular steel tube columns by means of expansive cement", Construct. Build. Mater., 23(1), 491-497. https://doi.org/10.1016/j.conbuildmat.2007.10.021
  38. Xue, L.H. and Cai, S.H. (1996), "Bond strength at the interface of concrete-filled steel tubular columns: part I", Build. Sci., 12(3), 22-28. [In Chinese]
  39. Yang, H., Lam, D. and Gardner, L. (2008), "Testing and analysis of concrete-filled elliptical hollow sections", Eng. Struct., 30(12), 3771-3781. https://doi.org/10.1016/j.engstruct.2008.07.004
  40. Young, B. and Ellobody, E. (2006), "Experimental investigation of concrete-filled cold-formed high strength stainless steel tube columns", J. Construct. Steel Res., 62(5), 484-492. https://doi.org/10.1016/j.jcsr.2005.08.004
  41. Zhao, X.L. and Packer, J.A. (2009), "Tests and design of concrete-filled elliptical hollow section stub columns", Thin-Wall. Struct., 47(6-7), 617-628. https://doi.org/10.1016/j.tws.2008.11.004

피인용 문헌

  1. 08.31: Analysis of the load transfer between materials in composite concrete encased steel columns loaded axially vol.1, pp.2-3, 2017, https://doi.org/10.1002/cepa.254
  2. Effect of Particle Size Distribution on Soil-Steel Interface Shear Behavior vol.54, pp.5, 2017, https://doi.org/10.1007/s11204-017-9474-0
  3. Bond strength between steel and self-compacting lower expansion concrete in composite columns vol.139, 2017, https://doi.org/10.1016/j.jcsr.2017.09.017
  4. Zum Verbundverhalten ausbetonierter Hohlprofilstützen mit massivem Stahlkern unter erhöhten Temperaturen vol.86, pp.8, 2017, https://doi.org/10.1002/stab.201710509
  5. Study on the Bond-Slip Performance of CFSSTs Based on Push-Out Tests vol.2018, pp.1687-8442, 2018, https://doi.org/10.1155/2018/2959827
  6. Fire resistance of high strength fiber reinforced concrete filled box columns vol.23, pp.5, 2017, https://doi.org/10.12989/scs.2017.23.5.611
  7. Experimentelle Untersuchungen zum Verbundverhalten in ausbetonierten Hohlprofilstützen mit massivem Stahlkern unter erhöhten Temperaturen vol.1, pp.5, 2015, https://doi.org/10.1002/cepa.591
  8. Fire resistance of high strength concrete filled steel tubular columns under combined temperature and loading vol.27, pp.2, 2015, https://doi.org/10.12989/scs.2018.27.2.243
  9. Shear transfer mechanism in connections involving concrete filled steel columns under shear forces vol.28, pp.4, 2015, https://doi.org/10.12989/scs.2018.28.4.449
  10. Local buckling of rectangular steel tubes filled with concrete vol.31, pp.2, 2015, https://doi.org/10.12989/scs.2019.31.2.201
  11. Study on the Bond Strength of Steel-Concrete Composite Rectangular Fluted Sections vol.2020, pp.None, 2015, https://doi.org/10.1155/2020/8844799
  12. Axial compressive behaviour of concrete-filled steel tubular columns with interfacial damage vol.23, pp.6, 2015, https://doi.org/10.1177/1369433219891639
  13. Performance of Lightweight Concrete with Expansive and Air-Entraining Admixtures in CFST Columns vol.32, pp.6, 2015, https://doi.org/10.1061/(asce)mt.1943-5533.0003143
  14. New methodology to analyze the steel-concrete bond in CFST filled with lightweight and conventional concrete vol.54, pp.1, 2021, https://doi.org/10.1617/s11527-020-01579-5
  15. Innovative shear transfer system for Concrete Filled Steel Tubes (CFST) in columns vol.4, pp.2, 2015, https://doi.org/10.1002/cepa.1354
  16. Shaking table tests on concrete-filled steel tubular-framed building assembled with microcrystalline foam boards vol.34, pp.None, 2015, https://doi.org/10.1016/j.istruc.2021.08.064