Textile Science and Engineering (한국섬유공학회지)

The Korean Fiber Society (한국섬유공학회)
권호 표지
DOI QR코드

DOI QR Code

Durability Test of Slitting Belt for Belt Bridle

철강산업 Slitting용 접압이송 벨트의 내구성실험

  • Received : 2015.04.17
  • Accepted : 2015.06.01
  • Published : 2015.06.30
⟨ Previous Next ⟩

Abstract

This study aimed to investigate a durability test of a textile composite belt for use in steel slitting. The belt was developed by combining scrim fabric and a nonwoven sheet composite with resin impregnation and a silicon finish. Because resin impregnation is necessary for a textile composite slitting belt, this study focussed primarily on examining two different types of resin influencing the belt durability, namely, thermosetting resin PVB and thermoplastic resin PET. The accelerated test conditions were obtained through a performance comparison with reference belt (50 hr with 500N load). The results indicate that thermosetting PVB is more suitable for the overall durability of a belt under repeated load conditions with friction when compared to thermoplastic PET, although PVB tends to increase the brittleness in comparison when compared to PET.

Keywords

References

  1. J. H. Kim and C. K. Moon,"Study on the Durability of Fiber Reinforced Composites", J. Mat. Res., 1997, 7, 434-443.
  2. D. J. Rho and C. K. Moon, M.S. Thesis, Pukyong National University, Busan, 1998.
  3. C. K. Moon, "Study on the Durability of Single Fiber Composite by Fragmentation Test", Polymer, 1996, 20, 106-115.
  4. C. K. Moon, S. H. Moon, C. S Seo, and H. H. Cho, "Study on the Durability of Carbon Fiber/Epoxy Composite by Two Fiber Fragmentation Test", Polymer, 1996, 20, 116-125.
  5. C. S. Lee and W. B. Hwang, "Fatigue Life Prediction of Fiber- Reinforced Composites Materials having Nonlinear Stress/Strain Behavior", J. Mat. Res., 1999, 12, 1-7.
  6. D. J. Lim, Y. K. Lee, H. S. Yoon, and M. H. Kim, "Prediction of Fatigue Life in 2Ply Rubber/Cord Laminate", J. Mat. Res., 2003, 16, 9-17.
  7. C. D. Cho and K. S. Rho, "Influence of Equivalent Elastic Moduli on Stress Analysis for Composite Material Structure", J. Korean Soc. Mech. Eng., 1996, 1, 227-230.
  8. S. H. Ahn, J. Y. Do, C. K. Moon, and K. W. Nam, "Bending Strength and Crack Healing of SiCf/SiC Composite Material", J. Korean Soc. Power Sys. Eng., 2013, 17, 94-102.
  9. J. D. Kim, H. J. Kim, S. W. Koh, and Y. S. Kim, "Wear Properties of Epoxy Matrix Nanocomposites", J. Korean Soc. Power Sys. Eng., 2010, 14, 83-88.
  10. B. U. Choe, Y. S. O, and G. S. Kim, "Design of Accelerated Life Testing for Automotive V-ribbed Belts", J. Korean Ins. Plant Eng., 2003, 8, 113-120.
  11. W. K. Cho, J. M. Go, M. H. Sin, D. J. Lee, S. J. Choi, and H. Y. Kim, "Proc. of Korean Soc. Mech. Eng.", 2005, pp.183-189.
  12. I. S. Choi, J. G. Eom, M. C. Lee, and M. S. Joun, "Proc. Korean Soc Mech. Eng. Annual Spring Conference", 2006, pp.37-45.
  13. J. H. Kwon and C. W. Seo,"Prediction of Fatigue Life for Composite Rotor Blade of Multipurpose Helicopter Using Strength Degradation Model", J. Mat. Res., 2001, 14, 50-59.
  14. H. S. O, D. G Lee, I. B. Jang, G. H. Park, Y. J. Kim, and J. W. Lee, "Proc. Korean Ins. Elec. Electronic Mat. Eng. Annual Fall Conference", 1997, pp.360-363.
  15. C. G. Sin, J. S. Kim, I. H. Jung, J. S. Lim, T. S. Kim, and J. U. Lee, "An Estimation of Life Time in Epoxy composites using Weibull Distribution Equation", J. Korean Ins. Elec. Electronic Mat. Eng., 1998, 11, 167-173.
  16. M. Kim and B. J. Yum, "Development of Reliability Design Methodology Using Accelerated Life Testing and Taguchi Method", J. Korean Ins. Ind. Eng., 2002, 28, 407-414.
  17. J. W. Park, S. H. Kim, and B. J. Yum, "Proc. of Korean Ins Ind Eng Annual Spring Conference", 2007, pp.635-639.
  18. J. Y. Han, M. H. Kim, and S. S. Kang, "A Study on the Physical Property of Epoxy Resin Due to After-Curing Condition", J. Korean Soc. Manufacturing Tech. Eng., 2012, 21, 976-981. https://doi.org/10.7735/ksmte.2012.21.6.976
  19. J. H. Oh and D. G. Lee, "Cure Simulation and Consolidation for a Thick Glass/Epoxy Laminate", J. Korean Soc. Mech. Eng., 2000, 24, 2853-2865.
  20. E. H. Jung, C. Kang, E. G. Kawg, K. S. Bae, D. K. Lee, and J. M. Kim, "The Properties of Rheology of Underwater-hardening Epoxy Resin According to the Temperature", J. Korea Ins. Building Const Annual Spring Conference, 2006, 6, 49-52.