Structural Engineering and Mechanics

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Free vibration analysis of damaged composite beams

  • Cunedioglu, Yusuf (Faculty of Engineering, Mechanical Engineering Department, Nigde University) ;
  • Beylergil, Bertan (Faculty of Engineering, Mechanical Engineering Department, Izmir Institute of Technology)
  • Received : 2014.09.17
  • Accepted : 2015.04.04
  • Published : 2015.07.10
⟨ Previous Next ⟩

Abstract

In this study, free vibration analyses of symmetric laminated cantilever and simply supported damaged composite beams are investigated by using finite element method (FEM). Free vibration responses of damaged beams are examined using Euler Bernoulli beam and classical lamination theories. A computer code is developed by using MATLAB software to determine the natural frequencies of a damaged beam. The local damage zone is assumed to be on the surface lamina of the beam by broken fibers after impact. The damaged zone is modeled as a unidirectional discontinuous lamina with $0^{\circ}$ orientations in this study. Fiber volume fraction ($v_f$), fiber aspect ratio ($L_f/d_f$), damage length ($L_D$) and its location (${\lambda}/L$), fiber orientation and stacking sequence parameters effects on natural frequencies are investigated. These parameters are affected the natural frequency values significantly.

Keywords

References

  1. Aydogdu, M. (2014), "On the vibration of aligned carbon nanotube reinforced composite beams", Adv. Nano Res., 2(4), 199-210. https://doi.org/10.12989/anr.2014.2.4.199
  2. Bradshaw, F.J., Dorey, G. and Sidey, G.R. (1972), "Impact resistance of carbon reinforced plastics", Proceedings of the Designing to Avoid Mechanical Failure Conference, 8-10.
  3. Cairns, D.S. and Lagace, P.A. (1989), "Transient response of graphite/epoxy and kevlar/epoxy laminates subjected to impact", AIAA J., 27(11), 1590-1596. https://doi.org/10.2514/3.10306
  4. Cantwell, W.J. and Morton, J. (1990), "Impact perforation of carbon fibre reinforced plastic", Compos. Sci. Technol., 38, 119-141. https://doi.org/10.1016/0266-3538(90)90002-M
  5. Cantwell, W.J. and Morton, J. (1991), "The impact resistance of composite materials-a review", Compos., 22(5), 347-362. https://doi.org/10.1016/0010-4361(91)90549-V
  6. Cevik, M. (2010), "In-plane vibration analysis of symmetric angle-ply laminated composite arches", Gazi Univ. J. Sci., 23(2), 187-199.
  7. Chen, W.Q., Lv, C.F. and Bian, Z.G. (2003), "Elasticity solution for free vibration of laminated beams", Compos. Struct., 62, 75-82. https://doi.org/10.1016/S0263-8223(03)00086-2
  8. Choi, H.Y. and Chang, F. A. (1991), "New approach toward understanding damage mechanisms and mechanics of laminated composites due to low-velocity impact", J. Compos. Mater., 25, 992-1038. https://doi.org/10.1177/002199839102500803
  9. Chun, K.S. and Kassegne, S.K. (2005), "Low-velocity impact dynamic behavior of laminated composite nonprismatic folded plate structures", J. Eng. Mech., 131(7), 678-688. https://doi.org/10.1061/(ASCE)0733-9399(2005)131:7(678)
  10. Cunedioglu, Y. (2011), "Analyses of Laminated Cantilever Composite Beams by Model Order Reduction Techniques", Mech. Base. Des. Struct., 39, 22-45. https://doi.org/10.1080/15397734.2011.524574
  11. Harris, C. (2002), Harris' shock and vibration handbook, 5th Edition, McGraw-Hill, USA.
  12. Kaw, A.K. (2006), Mechanics of composite materials, 2nd Edition, Taylor Francis, London.
  13. Kiral, B.G. (2009), "Free vibration analysis of delaminated composite beams", Sci. Eng. Compos. Mater., 16(3), 209-224.
  14. Kisa, M. (2004), "Free vibration analysis of a cantilever composite beam with multiple cracks", Compos. Sci. Technol., 64, 1391-1402. https://doi.org/10.1016/j.compscitech.2003.11.002
  15. Kumar, J.S., Raju, D. and Reddy, K.V.K. (2011), "Vibration analysis of composite laminated plates under higher order shear deformation theory with zig-zag function", Ind. J. Sci. Technol., 4(8), 960-966.
  16. Lagace, P.A. and Wolf, E. (1993), "Impact damage resistance of several laminated material systems", Proceedings of the Structural Dynamics and Materials Conference, 1863-1872.
  17. Numayr, K.S., Haddad, M.A. and Ayoub, A.F. (2006), "Investigation of free vibrations of composite beams by using the finite-difference method", Mech. Compos. Mater., 42(3), 231-242. https://doi.org/10.1007/s11029-006-0033-4
  18. Reddy, J.N. (1992), Finite element analysis of composite laminates,1st Edition, Springer.
  19. Setoodeh, A.R., Malekzadeh, P. and Nikbin, K. (2009), "Low-velocity impact analysis of laminated composite plates using a 3D elasticity based layer-wise FEM", Mater. Des., 30, 3795-3801. https://doi.org/10.1016/j.matdes.2009.01.031
  20. Sun, C.T. and Chen, J.K. (1985), "On the impact of initially stressed composite laminates", J. Comput. Math., 19(11), 490-504.
  21. Tiberkak, R., Bachene, M., Rechak, S. and Necib, B. (2008), "Damage prediction in composite plates subjected to low-velocity impact", Compos. Struct., 83, 73-82. https://doi.org/10.1016/j.compstruct.2007.03.007
  22. Yildirim, V. and Kiral, E. (2000), "Investigation of the rotary inertia and shear deformation effects on the out-of-plane bending and torsional natural frequencies of laminated beams", Compos. Struct., 49, 313-320. https://doi.org/10.1016/S0263-8223(00)00063-5

Cited by

  1. EPC method for delamination assessment of basalt FRP pipe: electrodes number effect vol.4, pp.1, 2015, https://doi.org/10.12989/smm.2017.4.1.069