Advances in aircraft and spacecraft science

  • 제2권3호
  • /
  • Pages.263-273
  • /
  • 2015
  • /
  • 2287-528X(pISSN)
  • /
  • 2287-5271(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Modeling of an embedded carbon nanotube based composite strain sensor

  • Boehle, M. (University of Dayton Research Institute) ;
  • Pianca, P. (University of Dayton Research Institute) ;
  • Lafdi, K. (University of Dayton Research Institute) ;
  • Chinesta, F. (Ecole Centrale of Nantes)
  • 투고 : 2014.08.06
  • 심사 : 2014.10.14
  • 발행 : 2015.07.25
⟨ 이전 논문 다음 논문 ⟩

초록

Carbon nanotube strain sensors, or so called "fuzzy fiber" sensors have not yet been studied sufficiently. These sensors are composed of a bundle of fiberglass fibers coated with CNT through a thermal chemical vapor deposition process. The characteristics of these fuzzy fiber sensors differ from a conventional nanocomposite in that the CNTs are anchored to a substrate fiber and the CNTs have a preferential orientation due to this bonding to the substrate fiber. A numerical model was constructed to predict the strain response of a composite with embedded fuzzy fiber sensors in order to compare result with the experimental results obtained in an earlier study. A comparison of the numerical and experimental responses was conducted based on this work. The longitudinal sensor output from the model matches nearly perfectly with the experimental results. The transverse and off-axis tests follow the correct trends; however the magnitude of the output does not match well with the experimental data. An explanation of the disparity is proposed based on microstructural interactions between individual nanotubes within the sensor.

키워드

과제정보

연구 과제 주관 기관 : AFOSR, ONR

참고문헌

  1. Abot, J.L., Song, Y., Vatsavaya, M.S., Medikonda, S., Kier, Z., Jayasinghe, C. et al. (2010), "Delamination detection with carbon nanotube thread in self-sensing composite materials", Compos. Sci. Tech., 70, 1113-1. https://doi.org/10.1016/j.compscitech.2010.02.022
  2. Alexopoulos, N.D., Bartholome, C., Poulin, P. and Marioli-Riga, Z. (2010), "Damage detection of glass fiber reinforced composites using embedded PVA-carbon nanotube (CNT) fibers", Compos. Sci. Tech., 70, 1733-1741. https://doi.org/10.1016/j.compscitech.2010.07.004
  3. Barber, A.H., Zhao, Q., Wagner, H.D., Baillie, C.A. (2004) "Characterization of E-glass-polypropylene interfaces using carbon nanotubes as strain sensors", Compos. Sci. Tech., 64, 1915-1919. https://doi.org/10.1016/j.compscitech.2004.02.004
  4. Boehle, M., Jiang, Q., Li, L., Lagounov, A. and Lafdi, K. (2012), "Carbon nanotubes on glass fiber as a strain sensor for real time structural health monitoring", Int. J. Smart Nano Mater., 3(2),162-168. https://doi.org/10.1080/19475411.2011.651509
  5. Dharap, P., Li, Z., Nagarajaiah, S., Barrera, E.V. (2004), "Nanotube film based on single-wall carbon nanotubes for strain sensing", Nanotechnology, 15, 379-382. https://doi.org/10.1088/0957-4484/15/3/026
  6. Grow, R.J., Wang, Q., Cao, J., Wang, D. and Dai, H. (2005), "Piezoresistance of carbon nanotubes on deformable thin-film membranes", Appl. Phys. Lett., 86, 93-104.
  7. Hu, B., Hu, N., Cai, Y., Yuan, W., Yan, C., Cai, Y. et al. (2013), "Performance characterization of VGCF/epoxy nanocomposite sensors under static load cycles and in static structural health monitoring", Smart Mater. Struct., 22, 045008-045017. https://doi.org/10.1088/0964-1726/22/4/045008
  8. Hu, N., Fukunaga, H., Atobe, S., Liu, Y. and Li, J. (2011), "Piezoresistive Strain Sensors Made from Carbon Nanotubes Based Polymer Nanocomposites", Sensors, 11, 10691-10723. https://doi.org/10.3390/s111110691
  9. Hu, N., Karube, Y., Yan, C., Masuda, Z. and Fukunaga, H. (2008), "Tunneling effect in a polymer/carbon nanotube nanocomposite strain sensor", Acta Materialia, 56, 2929-2936. https://doi.org/10.1016/j.actamat.2008.02.030
  10. Hu, N., Karube, Y., Arai, M., Watanabe, T., Yan, C., Li, Y. et al. (2010), "Investigation on sensitivity of a polymer/carbon nanotube composite strain sensor", Carbon, 48, 680-687. https://doi.org/10.1016/j.carbon.2009.10.012
  11. Kang, I., Schulz, M.J., Kim, J.H., Shanov, V. and Shi, D. (2006), "A carbon nanotube strain sensor for structural health monitoring", Smart Mater. Struct., 15(3), 737-748. https://doi.org/10.1088/0964-1726/15/3/009
  12. Karimov, K.S., Khalid, F.A. and Chani, M.T.S. (2012), "Carbon nanotubes based strain sensors. Measurement, 45, 918-921. https://doi.org/10.1016/j.measurement.2012.02.003
  13. Li, C., Thostenson, E.T. and Chou, T.W. (2008), "Sensors and actuators based on carbon nanotubes and their composites: A review", Compos. Sci. Tech., 68, 1227-1249. https://doi.org/10.1016/j.compscitech.2008.01.006
  14. Li, C. and Chou, T.W. (2008), "Modeling of damage sensing in fiber composites using carbon nanotube networks", Compos. Sci. Tech., 68, 3373-3379. https://doi.org/10.1016/j.compscitech.2008.09.025
  15. Rausch, J. and Mader, E. (2010) "Health monitoring in continuous glass fibre reinforced thermoplastics: Manufacturing and application of interphase sensors based on carbon nanotubes", Compos. Sci. Tech., 70, 1589-1596. https://doi.org/10.1016/j.compscitech.2010.05.018
  16. Sebastian, J., Schehl, N., Bouchard, M., Boehle, M., Li, L., Lagounov, A. and Lafdi, K. (2014), "Health monitoring of structural composites with embedded carbon nanotube coated glass fiber sensors", Carbon, 66, 191-200. https://doi.org/10.1016/j.carbon.2013.08.058
  17. Thostenson, E.T. and Chou, T.W. (2008), "Carbon nanotube-based health monitoring of mechanically fastened composite joints", Compos. Sci. Tech., 68, 2557-2561. https://doi.org/10.1016/j.compscitech.2008.05.016
  18. Thostenson, E.T. and Chou, T.W. (2008), "Real-time in situ sensing of damage evolution in advanced fiber composites using carbon nanotube networks", Nanotechnology, 19, 1-6.
  19. Vemuru, S.M., Wahi, R., Nagarajaiah, S. and Ajayan, P.M. (2009), "Strain sensing using a multiwalled carbon nanotube film", J. Strain Anal., 44, 555-562. https://doi.org/10.1243/03093247JSA535

피인용 문헌

  1. Instability analysis of viscoelastic CNTs surrounded by a thermo-elastic foundation vol.63, pp.2, 2017, https://doi.org/10.12989/sem.2017.63.2.171