DOI QR코드

DOI QR Code

강섬유 보강 초고성능 콘크리트의 전단 전달 모델

Shear Transfer Strength Evaluation for Ultra-High Performance Fiber Reinforced Concrete

  • 이지형 (서울대학교 공과대학 건축학과) ;
  • 홍성걸 (서울대학교 공과대학 건축학과)
  • Lee, Ji-Hyung (Department of Architecture and Architectural Engineering, Seoul National University) ;
  • Hong, Sung-Gul (Department of Architecture and Architectural Engineering, Seoul National University)
  • 투고 : 2015.02.23
  • 심사 : 2015.03.23
  • 발행 : 2015.06.15

초록

Ultra High Performance Fiber Reinforced Concrete (UHPFRC) has a outstanding tensile hardening behaviour after a crack develops, which gives ductility to structures. Existing shear strength model for fiber reinforced concrete is entirely based on crack opening behavior(mode I) which comes from flexural-shear failure, not considering shear-slip behavior(mode II). To find out the mode I and mode II behavior on a crack in UHPFRC simultaneously, maximum shear strength of cracked UHPFRC is investigated from twenty-four push-off test results. The shear stress on a crack is derived as variable of initial crack width and fiber volume ratio. Test results show that shear slippage is proportional to crack opening, which leads to relationship between shear transfer strength and crack width. Based on the test results a hypothesis is proposed for the physical mechanics of shear transfer in UHPFRC by tensile hardening behavior in stead of aggregate interlocking in reinforced concrete. Shear transfer strength based on tensile hardening behavior in UHPFRC is suggested and this suggestion was verified by comparing direct tensile test results and push-off test results.

키워드

참고문헌

  1. Casanova P. and Rossi P., "Analysis and Design of Steel Fiber-Freinforced Concrete Beams", ACI Structural Journal, Vol. 94, No. 5, pp. 595-602, 1997
  2. Casanova P., Rossi P. and Schaller I., "Can Steel Fiber Replace Transverse Reinforcements in Reinforced Concrete Beams?", ACI Material Journal, Vol. 94, No. 5, pp. 341-351, 1997
  3. Duthinh, D., "Sensitivity of Shear Strength of Reinforced Concrete and Prestressed Concrete Beams to Shear Friction and Concrete Softening According to Modified Compression Field Theory", ACI Structural Journal, Vol. 96, No. 4, pp. 495-508, 1999
  4. Korea Concrete Institute, "Design Guidelines for Ultra High Performance Concrete (K-UHPC) Structure", Korea Concrete Institute, pp. 75, 2014
  5. Muttoni A. and Ruiz M. F., "Shear Strength of Members without Transverse Reinforcement as Function of Critical Shear Crack Width", ACI Journal, Proceedings, Vol.105, No.2, pp. 163-172, 2008
  6. Toutlemonde F. and Resplendino J., "Designing and building with UHPFRC : State of the Art and Development", ISTE Ltd. and Wiley & Sons, Inc., 814 pp, 2011
  7. Sokhwan Choi, Bubmook Lim, Chang Kook Oh, and Changbin Joh, "Technique for the Measurement of Crack Widths at Notched / Unnotched Regions and Local Strains", Journal of the Korea Concrete Institute, Vol.24, No.2, pp. 205-214, 2012 https://doi.org/10.4334/JKCI.2012.24.2.205
  8. Vecchio, F. J. and Collins, M. P., "The Modified Compression Field Theory for Reinforced Concrete", ACI Journal, Proceedings, Vol. 83, No.2, pp. 219-231, 1986
  9. Walraven, J. C., "Aggregate Interlock: A Theoretical and Experimental Analysis", Delft University Press, 197 pp, 1980