Computers and Concrete

  • 제15권6호
  • /
  • Pages.935-950
  • /
  • 2015
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Compressive, shear and torsional strength of beams made of self-compacting concrete

  • Mazloom, Moosa (Department of Civil Engineering, Shahid Rajaee Teacher Training University) ;
  • Saffari, Amirali (Department of Civil Engineering, Shahid Rajaee Teacher Training University) ;
  • Mehrvand, Morteza (Department of Civil Engineering, University of Science and Culture)
  • 투고 : 2014.10.18
  • 심사 : 2015.04.17
  • 발행 : 2015.06.25
⟨ 이전 논문 다음 논문 ⟩

초록

The aim of this study is to provide experimental data regarding the compressive, shear and torsional strength of self-compacting concrete (SCC) used in rectangular beams, and then comparing the results with the equations presented by the CSA A23.3-04 and ACI 318-11. In fact, the gathered information in this field is quite useful for calibrating the computer models of other researchers. The other goal of this study was to investigate the effects of silica fume and superplasticizer dosages on the mechanical properties of SCC. In this research, SCC is made based on 16 different type mixing layout. Also two normal concrete (NC) or vibrating concrete are constructed to compare the results of SCC and NC. This work concentrated on concrete mixes having water/binder ratios of 0.45 and 0.35, which contained constant total binder contents of $400kg/m^3$ and $500kg/m^3$, respectively. The percentages of silica fume that replaced cement were 0% and 10%. The superplasticizer dosages utilized in the mixtures were 0.4%, 0.8%, 1.2% and 1.6% of the weight of cement. Beam dimensions used in this test were $30{\times}30{\times}120cm^3$. The results of this research indicated that shear and torsional strength of SCC beams to be used in computer models can be calculated utilizing the equations presented in CSA A23.3-04 and ACI 318-11.

키워드

참고문헌

  1. ACI Committee 318-11 (2011), Building Code Requirements for Structural Concrete (ACI 318-11) and Commentary, American Concrete Institute.
  2. Aky, H. and Al-Mahaidi, R. (2006), "An experimental and numerical investigation ontorsional strengthening of solid and box-section RC beams using CFRP laminates", J. Compos. Struct., 75(1-4), 213-221, DOI: 10.1016/j.compstruct.2006.04.050.
  3. Aky, H. and Al-Mahaidi, R. (2007), "Torsional capacity of CFRP strengthened reinforced concrete beams", J. Compos. Struct., 11(1), 71-80, DOI: 10.1061/(ASCE)1090-0268(2007)11:1(71).
  4. Chalioris, C.E. (2007), "Analytical model for the torsional behavior of reinforced concrete beams retrofitted with FRP materials", J.Eng. Struct., 29(12), 3263-3276, DOI: 10.1016/j.engstruct.2007.09.009.
  5. Chalioris, C.E. (2008), "Torsional strengthening of rectangular and flanged beams using carbon fiber-reinforced-polymers-Experimental study", Const. Build. Mater., 22, 21-29. DOI: 10.1016/j.conbuildmat.2006.09.003.
  6. Choulli, Y. (2005), "Thesis shear behavior of prestressed I-beams made with high strength self-compacting concrete", Technical University of Catalonia, Barcelona.
  7. Cladera, A. and Mari, A.R. (2004), "Shear design for reinforced normal and high strength concrete beams using artificial neural networks, Part I Beams without stirrups", J. Eng. Struct., 26(7), 917-925, DOI: 10.1016/j.engstruct.2004.02.010.
  8. Cladera, A. and Mari, A.R. (2005), "Shear design procedure for reinforced and prestressed high and normal strength concrete beams", Proceedings of the 7th International Symposium on Utilization of High Strength/High Performance Concrete (ACI SP-228), USA.
  9. Cladera, A. and Mari, A.R. (2005), "Experimental study on high-strength concrete beams failing in shear", J. Eng. Struct., ISSN: 0141-0296, 27(10), 1519-1527, DOI: 10.1016/j.engstruct.2005.04.010.
  10. Constantin, E.C. and Constantin, N.P. (2012), "Self-compacting concrete jacketing-tests and analysis", AASRI Procedia, 3, 624-629, DOI:10.1016/j.aasri.2012.11.099.
  11. Constantin, E.C., Georgia E.T. and Stavroula, J.P. (2014), "Behaviour of rehabilitated RC beams with self-compacting concrete jacketing-Analytical model and test results", J. Constr. Build. Mater., 55, 257-273, DOI:10.1016/j.conbuildmat.2014.01.031.
  12. CSA Standard A23.3. (2004), Design of concrete structures (CSA A23.3-04), Canadian Standards association.
  13. Day, K.W. (2006), Concrete Mix Design, Quality Control and Specification, (Third Edition), CRC Press, Taylor and Francis Group.
  14. Felekoglu, B. (2003), "Investigation on mechanical and physical properties of SCC", M.Sc. Thesis in Civil Engineering, Dokus Eylul University, Izmir.
  15. Felekoglu, B., Turkel, S. and Baradan, B. (2007), "Effect of water/cement ratio on the fresh and hardened properties of self compacting concrete", J. Build. Environ., 42(4), 795-1802, DOI: 10.1016/j.buildenv.2006.01.012.
  16. Hegger, J., Rauscher, S., Kommer, B. and Gditz S. (2005), "Shear strength of concrete beams made of self-consolidating concrete", Proceeding of the Second North American Conference on the Design and Use of Self-Consolidating Concrete, Fourth International RILEM Symposium on Self-Compacting Concrete, Chicago, USA.
  17. Jianxiong, C., Xincheng, P. and Yubin, H. (1999), "A study of self-compacting HPC with superfine sand and pozzolanic additives", Proceeding of the 1st International RILEM Symposium on Self-Compacting Concrete, RILEM Symp. On SCC, RILEM Edited by A. Skarendahl and O. Peterson.
  18. Kamara, M.E., Novak, L.C. and Rabbat, B.G. (2008), Notes on ACI 318-08 with Design Applications, (Tenth edition), Portland Cement Association, USA.
  19. Macginley, T.J. and Choo, B.S. (2003), Reinforced Concrete Design Theory & Examples, (Second Edition), CRC Press, Taylor and Francis Group.
  20. Mazloom, M., Ramezanianpour, A.A. and Brooks, J.J. (2004), "Effect of silica fume on mechanical properties of high-strength concrete", J. Cement. Concr. Comp., 26(4), 347-357, DOI: 10.1016/S0958-9465(03)00017-9.
  21. Mazloom, M. and Yoosefi, M.M. (2011), "Estimating the long-term strength of self-compacting concrete from short-term tests", J. Civil Engin. Architect., 5(1), 68-76.
  22. Mazloom, M. and Yoosefi, M.M. (2013) "Predicting the indirect tensile strength of self compacting concrete using artificial neural networks", Comput. Concr., 12(3), 285-301. DOI: 10.12989/cac.2013.12.3.285.
  23. Mehta, P.K. and Monteiro, J.M. (2006), Concrete Microstructure, Properties, and Materials, (Third Edition), McGraw-Hill Companies.
  24. Nawy, E.G. (2008), Concrete Construction Engineering Handbook, (Second Edition), CRC Press, Taylor and Francis Group.
  25. Okamura, H. and Ouchi, M. (1999), "Self Compacting Concrete: Development, present use and future", 1st International RILEM Symposium on Self-Compacting Concrete, RILEM Symp. On SCC, RILEM Edited by A. Skarendahl and O. Peterson, 3-14.
  26. Persson, B. (2001), "A comparison between mechanical properties of self-compacting concrete and the corresponding properties of normal concrete", J. Cement. Concrete. Res., 31(2), 193-198. DOI: 10.1016/S0008-8846(00)00497-X.
  27. Schiessl, A. and Zilch, K. (2001), "The effects of the modified composition of SCC on shear bond behavior", Proceeding of the 2th Int. RILEM Symp. On SCC, (Tokyo, Japan), Proceedings of 2nd Int. RILEM Symp. On SCC, RILEM, (Eds. K. Ozawa and M. Ouchi), COMS Engineering Corporation. 501-506.
  28. Su, N. and Miao, B. (2003), "A new method for mix design of medium strength flowing concrete with low cement content", J.Cement.Concrete.Compos., 25(2), 215-222, DOI: 10.1016/s0958-9465(02)00013-6.
  29. Suksawang, N., Nassif, H. and Najm, H. (2006), "Evaluation of mechanical properties for self-consolidating, normal, and high performance concrete", J. Transportation Research Board, 1979/2006 concrete materials, 36-45, DOI: 10.3141/1979-07.

피인용 문헌

  1. The relationship between fracture toughness and compressive strength of self-compacting lightweight concrete vol.431, pp.1757-899X, 2018, https://doi.org/10.1088/1757-899X/431/6/062007
  2. Evaluating the settlement of lightweight coarse aggregate in self-compacting lightweight concrete vol.19, pp.2, 2015, https://doi.org/10.12989/cac.2017.19.2.203
  3. Effect of silica fume and polyepoxide-based polymer on electrical resistivity, mechanical properties, and ultrasonic response of SCLC vol.5, pp.6, 2015, https://doi.org/10.12989/acc.2017.5.6.587
  4. Effects of silica fume, superplasticizer dosage and type of superplasticizer on the properties of normal and self-compacting concrete vol.7, pp.1, 2018, https://doi.org/10.12989/amr.2018.7.1.045
  5. Assessment of the influence of micro- and nano-silica on the behavior of self-compacting lightweight concrete using full factorial design vol.20, pp.1, 2019, https://doi.org/10.1007/s42107-018-0088-2
  6. Studying the effects of CFRP and GFRP sheets on the strengthening of self-compacting RC girders vol.6, pp.1, 2015, https://doi.org/10.12989/smm.2019.6.1.047
  7. Thermal effects on the mechanical properties of cement mortars reinforced with aramid, glass, basalt and polypropylene fibers vol.8, pp.2, 2015, https://doi.org/10.12989/amr.2019.8.2.137
  8. Size effect study on compressive strength of SCLC vol.23, pp.6, 2015, https://doi.org/10.12989/cac.2019.23.6.409
  9. Effect of magnetic field intensity on fracture behaviours of self-compacting lightweight concrete vol.71, pp.13, 2019, https://doi.org/10.1680/jmacr.17.00418
  10. Studying the Park-Ang damage index of reinforced concrete structures based on equivalent sinusoidal waves vol.72, pp.1, 2015, https://doi.org/10.12989/sem.2019.72.1.083
  11. An overview of different retrofitting methods for arresting cracks in steel structures vol.6, pp.4, 2015, https://doi.org/10.12989/smm.2019.6.4.291
  12. Torsion of circular open cross-section with corrugated inner and outer surface vol.73, pp.1, 2015, https://doi.org/10.12989/sem.2020.73.1.075
  13. Long-term quality control of self-compacting semi-lightweight concrete using short-term compressive strength and combinatorial artificial neural networks vol.25, pp.5, 2015, https://doi.org/10.12989/cac.2020.25.5.401
  14. Fracture of fibre-reinforced cementitious composites after exposure to elevated temperatures vol.73, pp.14, 2015, https://doi.org/10.1680/jmacr.19.00401