DOI QR코드

DOI QR Code

Performance prediction of horizontal axis marine current turbines

  • Bal, Sakir (Department of Naval Architecture and Marine Engineering, Istanbul Technical University) ;
  • Atlar, Mehmet (School of Marine Science and Technology, Newcastle University) ;
  • Usar, Deniz (Department of Naval Architecture and Marine Engineering, Istanbul Technical University)
  • 투고 : 2015.04.06
  • 심사 : 2015.06.08
  • 발행 : 2015.06.25

초록

In this study, hydrodynamic performance of a 400 mm diameter horizontal axis marine current turbine model was tested in a cavitation tunnel with 1.21 m x 0.8 m cross-section for over a range of tip speed ratios. Torque and thrust data, as well as cavitation visualizations, for certain operating conditions were acquired. Experimental results indicated that the turbine can be exposed to significant amount of sheet and cloud cavitation over the blades along with vortex cavitation at the blade tips. Inception and distribution of cavitation along the blades of the model turbine were then modelled numerically for design operating conditions using a vortex lattice method. The method was also applied to a turbine tested previously and obtained results were compared with the data available. The comparison between simulation results and experimental data showed a slight difference in terms of span-wise extent of the cavitation region. The cloud and tip vortex cavity observed in experiments cannot be modelled due to the fact that the VLM lacks the ability to predict such types of cavitation. Notwithstanding, the use of such prediction methods can provide a reasonably accurate approach to estimate, therefore take the hydrodynamic effects of cavitation into account in design and analysis of marine current turbines.

키워드

참고문헌

  1. Atlar, M. (2011), Recent upgrading of marine testing facilities at Newcastle University, AMT‟11, the second international conference on advanced model measurement technology for the EU maritime industry.
  2. Bahaj, A.S., Batten, W.M.J. and McCann, G. (2007a), "Experimental verifications of numerical predictions for the hydrodynamic performance of horizontal axis Marine Current Turbines", Renew. Energ., 32, 2479-2490. https://doi.org/10.1016/j.renene.2007.10.001
  3. Bahaj, A.S., Molland, A.F., Chaplin, J.R. and Batten, W.M.J. (2007b), "Power and thrust measurements of Marine Current Turbines under various hydrodynamic flow conditions in a cavitation tunnel and a towing tank", Renew. Energ., 32, 407-426. https://doi.org/10.1016/j.renene.2006.01.012
  4. Baltazar, J. and Falcao de Campos, J.A.C. (2011), "Hydrodynamic analysis of a horizontal axis marine current turbine with a boundary element method", J. Offshore Mech. Arct., 133(4), 041304. https://doi.org/10.1115/1.4003387
  5. Bal, S. and Guner, M. (2009), "Performance analysis of podded propulsors", Ocean Eng., 36, 556-563. https://doi.org/10.1016/j.oceaneng.2009.01.016
  6. Bal, S. (2011a), "A method for optimum cavitating ship propellers", Turkish J. Eng. Environ. Sci., 35, 139-158.
  7. Bal, S. (2011b), "A practical technique for improvement of open water propeller performance", Proceedings of the Institution of Mechanical Engineers, Part M, Journal of Engineering for the Maritime Environment, 225(4), 375-386 https://doi.org/10.1177/1475090211413957
  8. Blunden, L.S. and Bahaj, A.S. (2007), "Tidal energy resource assessment for tidal stream generators", Proc. Inst. Mech. Eng., Part A, Journal of Power and Energy, 221(2), 137-146. https://doi.org/10.1243/09576509JPE332
  9. Charlier, R.H. (2003), "A "sleeper" awakes: tidal current power", Renew. Sust. Energ. Rev., 7(6), 515-529. https://doi.org/10.1016/S1364-0321(03)00079-0
  10. Fraenkel, P.L. (2002), "Power from marine currents". Proc. Inst. Mech. Eng., Part A, Journal of Power and Energy, 216, 1-14. https://doi.org/10.1243/09576500260251129
  11. Greely, D. and Kerwin, J.E. (1982), "Numerical methods for propeller design and analysis in steady flow", SNAME Trans., 90, 415-453.
  12. Janiszewska, J. (1996), Effects of grit roughness and pitch oscillations on the s814 airfoil, National Renewable Energy Lab., Colorado, USA.
  13. He, L., Xu, W. and Kinnas, S.A. (2001), "Numerical methods for the prediction of unsteady performance of marine propellers and current turbines", Proceedings of the Twenty-first (2011) International Offshore and Polar Engineering Conference, Maui, Hawaii, USA, June 19-24.
  14. Kerwin, J.E. and Lee, C.S. (1978), "Prediction of steady and unsteady marine propeller performance by numerical lifting surface theory", SNAME Transations, 86, 1-30.
  15. Kinnas, S.A., Griffin, P., Choi, J.K. and Kosal, E. (1998), "Automated design of propulsor blades for high-speed ocean vehicle applications", Transacions of SNAME, 106, 213-240.
  16. Kinnas, S.A., Xu, W., Yu, Y.H. and He, L. (2012), "Computational methods for the design and prediction of performance of tidal turbines", J. Offshore Mech. Arct., 134(1), 011101. https://doi.org/10.1115/1.4003390
  17. Lee, C.S. (1979), Prediction of steady and unsteady performance of marine propeller with or without cavitation by numerical lifting surface theory, PhD thesis, Massachusetts Institute of Technology.
  18. Molland, A.F., Bahaj, A.S., Chaplin, J.R. and Batten W.M.J. (2004), "Measurements and predictions of forces, pressures and cavitation on 2-D sections suitable for marine current turbines", Proc. Inst. Mech. Eng., Part M, Journal of Engineeing for Marine Environment, 218(2), 127-138. https://doi.org/10.1243/095441104322984022
  19. Myers, L. and Bahaj, A.S. (2007), "Wake studies of a 1/30th scale horizontal axis marine current turbine", Ocean Eng., 34, 758-762. https://doi.org/10.1016/j.oceaneng.2006.04.013
  20. Usar, D. and Bal, S. (2015), "Cavitation simulation on horizontal axis marine current turbines", Renew. Energ., 80, 15-25. https://doi.org/10.1016/j.renene.2015.01.060
  21. Usar, D. and Bal, S. (2011), "Application of classical bla1de element momentum theory and a boundary element method to cavitating marine current turbines", INT-NAM 1st Int. Symposium on Naval Architecture and Maritime, Istanbul.
  22. Usar, D. (2015), Hydrodynamic Analysis of Marine Current Turbines, Ph.D. Thesis, Istanbul Technical University, Istanbul.
  23. Wang, D., Atlar, M. and Sampson, R. (2007), "An experimental investigation on cavitation, noise, and slipstream characteristics of ocean stream turbines", J. Power and Energy-Proceedings IMechE, 221 Part A.

피인용 문헌

  1. An enhanced and validated performance and cavitation prediction model for horizontal axis tidal turbines vol.19, 2017, https://doi.org/10.1016/j.ijome.2017.07.003
  2. Optimization of a horizontal axis marine current turbine via surrogate models vol.9, pp.2, 2019, https://doi.org/10.12989/ose.2019.9.2.111
  3. AI based control theory for interaction of ocean system vol.10, pp.2, 2020, https://doi.org/10.12989/ose.2020.10.2.227