참고문헌
- Zahidi, A., 2012, Current Status and Future Prospects of the Wind Energy, Proc. of Power & Energy Conference, 54-58.
- Thresher, R., Robinson. M., Veers. P., 2008, Wind Energy Technology: Current Status and R&D Future, Conference Paper NREL/CP-500-43374, National Renewable Energy Laboratory, Colorado, USA.
- Burton, T., Sharpe, D., Jenkins, N., Bossanyi, E., 2001, Wind Energy Handbook, John Wiley & Sons Inc, West Sussex, England.
- Ribrant, J., Bertling, L. M., 2007, Survey of Failures in Wind Power Systems with Focus on Swedish Wind Power Plants During 1997-2005, IEEE Transactions on Energy Conversion, 22:1 167-173. https://doi.org/10.1109/TEC.2006.889614
- Tegen, S., Lantz, E., Hand, B., Maples, B., Smith, A., Schwabe, P., 2013, 2011 Cost of Wind Energy Review, Technical report NREL/TP-5000-56266, National Renewable Energy Laboratory, Colorado, USA.
- Link, H., LaCava, W., VanDam, J., McNiff, B., Sheng, S., Wallen, R., McDade, B., Lambert, S., Butterfield, S., Oyague, F., 2011, Gearbox Reliability Collaborative Project Report: Findings from Phase 1 and Phase 2 Testing, Technical Report NREL/TP-5000-51885, National Renewable Energy Laboratory, Colorado, USA.
- Link, H., Keller, J., Guo, Y., McNiff, B., 2013, Gearbox Reliability Collaborative Phase 3 Gearbox 2 Test Plan, Technical Report NREL/TP-5000-58190, National Renewable Energy Laboratory, Colorado, USA.
- Lee, H. W., Kang, D. K., 2014, Gear Teeth Modification for a 2.5MW Wind Turbine Gearbox, Journal of the Korean Society of Manufacturing Technology Engineers, 23:2 109-117. https://doi.org/10.7735/ksmte.2014.23.2.109
- Nam, J. S., Park, Y. J., Kim, J. K., Lee, G. H., Han, J. W., Nam, Y. Y., 2014, Effect of Non-torque Loadings on the Load Sharing Characteristics of Planetary Gearbox, Proceedings of the Korean Society of Manufacturing Technology Engineers, 9 119.
- Argyriadis, K., Rademakers, L., Capellaro, M., Ristow, M., Hauptmann, S., Kochmann, M., Mouzakis, F., 2009, Procedures for Testing and Measuring Wind Energy Systems - Deliverable D1: Stateof-the-art-report, PROTEST Collaborative Project FP7-ENERGY-2007-1-RTD, University of Stuttgart, Gearmany.
- GL, 2010, Guideline for the Certification of Wind Turbine, GL2010, Germanischer Lloyd, Hamburg, Germany.
- Nam, J. S., 2014, Effect of Non-torque Loadings on the Life of 3 Point Suspension Gearbox for Wind Turbine, A Thesis for a Doctorate, Seoul National University, Republic of Korea.
- Nam, J. S., Han, J. W., Park, Y. J., Nam, Y. Y., Lee, G. H., 2014, Development of Highly Reproducible Test Rig for Pitch and Yaw Bearings of Wind Turbine, Journal of Mechanical Science and Technology, 28:2 705-712. https://doi.org/10.1007/s12206-013-1134-3
- Ionescu, L., Pontius, T., 2009, Main Shaft Support for Wind Turbine With a Fixed and Floating Bearing Configuration, Technical Paper, The Timken Company, Ohio, USA.
피인용 문헌
- The Influence of Suspension Stiffness on the Gearbox Input Loads in a 3-Point Suspension Wind Turbine Drive Train vol.24, pp.5, 2015, https://doi.org/10.7735/ksmte.2015.24.5.514
- 풍력발전기용 3점 지지 기어박스의 토크암 핀 및 탄성중합체 부싱 설계 vol.26, pp.2, 2015, https://doi.org/10.7735/ksmte.2017.26.2.199