The Journal of Advanced Prosthodontics

  • 제7권3호
  • /
  • Pages.249-256
  • /
  • 2015
  • /
  • 2005-7806(pISSN)
  • /
  • 2005-7814(eISSN)
대한치과보철학회 (The Korean Academy of Prosthodonitics)
권호 표지
DOI QR코드

DOI QR Code

Effect of atmospheric plasma versus conventional surface treatments on the adhesion capability between self-adhesive resin cement and titanium surface

  • Seker, Emre (Department of Prosthodontics, Faculty of Dentistry, Eskisehir Osmangazi University) ;
  • Kilicarslan, Mehmet Ali (Department of Prosthodontics, Faculty of Dentistry, Ankara University) ;
  • Deniz, Sule Tugba (Department of Prosthodontics, Faculty of Dentistry, Biruni University) ;
  • Mumcu, Emre (Department of Prosthodontics, Faculty of Dentistry, Eskisehir Osmangazi University) ;
  • Ozkan, Pelin (Department of Prosthodontics, Faculty of Dentistry, Ankara University)
  • 투고 : 2014.12.10
  • 심사 : 2015.04.08
  • 발행 : 2015.06.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

PURPOSE. The aim of this study was to evaluate the effects of atmospheric plasma (APL) versus conventional surface treatments on the adhesion of self-adhesive resin cement to Ti-6Al-4V alloy. MATERIALS AND METHODS. Sixty plates of machined titanium (Ti) discs were divided into five groups (n=12): 1) Untreated (CNT); 2) Sandblasted (SAB); 3) Tribochemically treated (ROC); 4) Tungsten CarbideBur (TCB); 5) APL treated (APL). SEM analysis and surface roughness (Ra) measurements were performed. Self-adhesive resin cement was bonded to the Ti surfaces and shear bond strength (SBS) tests, Ra and failure mode examinations were carried out. Data were analyzed by one-way analysis of variance and chi-squared test. RESULTS. The lowest SBS value was obtained with CNT and was significantly different from all other groups except for APL. The ROC showed the highest SBS and Ra values of all the groups. CONCLUSION. It was concluded that the effect of APL on SBS and Ra was not sufficient and it may not be a potential for promoting adhesion to titanium.

키워드

참고문헌

  1. McCracken M. Dental implant materials: commercially pure titanium and titanium alloys. J Prosthodont 1999;8:40-3. https://doi.org/10.1111/j.1532-849X.1999.tb00006.x
  2. Berg E, Davik G, Hegdahl T, Gjerdet NR. Hardness, strength, and ductility of prefabricated titanium rods used in the manufacture of spark erosion crowns. J Prosthet Dent 1996;75:419-25. https://doi.org/10.1016/S0022-3913(96)90035-9
  3. Ozcan M, Pfeiffer P, Nergiz I. A brief history and current status of metal-and ceramic surface-conditioning concepts for resin bonding in dentistry. Quintessence Int 1998;29:713-24.
  4. Tsuchimoto Y, Yoshida Y, Takeuchi M, Mine A, Yatani H, Tagawa Y, Van Meerbeek B, Suzuki K, Kuboki T. Effect of surface pre-treatment on durability of resin-based cements bonded to titanium. Dent Mater 2006;22:545-52. https://doi.org/10.1016/j.dental.2005.08.002
  5. Asmussen E, Peutzfeldt A. Surface energy characteristics of adhesive monomers. Dent Mater 1998;14:21-8. https://doi.org/10.1016/S0109-5641(98)00005-0
  6. Fonseca RG, Haneda IG, Almeida-Junior AA, de Oliveira Abi-Rached F, Adabo GL. Efficacy of air-abrasion technique and additional surface treatment at titanium/resin cement interface. J Adhes Dent 2012;14:453-9.
  7. Inan O, Acar A, Halkaci S. Effects of sandblasting and electrical discharge machining on porcelain adherence to cast and machined commercially pure titanium. J Biomed Mater Res B Appl Biomater 2006;78:393-400.
  8. Fonseca RG, de Almeida JG, Haneda IG, Adabo GL. Effect of metal primers on bond strength of resin cements to base metals. J Prosthet Dent 2009;101:262-8. https://doi.org/10.1016/S0022-3913(09)60050-0
  9. Akin H, Ozkurt Z, Kirmali O, Kazazoglu E, Ozdemir AK. Shear bond strength of resin cement to zirconia ceramic after aluminum oxide sandblasting and various laser treatments. Photomed Laser Surg 2011;29:797-802. https://doi.org/10.1089/pho.2011.3039
  10. Bertolotti RL. Adhesion to porcelain and metal. Dent Clin North Am 2007;51:433-51. https://doi.org/10.1016/j.cden.2006.12.003
  11. Taira Y, Matsumura H, Yoshida K, Tanaka T, Atsuta M. Adhesive bonding of titanium with a methacrylate-phosphate primer and self-curing adhesive resins. J Oral Rehabil 1995;22:409-12. https://doi.org/10.1111/j.1365-2842.1995.tb00793.x
  12. Abi-Rached Fde O, Fonseca RG, Haneda IG, de Almeida-Júnior AA, Adabo GL. The effect of different surface treatments on the shear bond strength of luting cements to titanium. J Prosthet Dent 2012;108:370-6. https://doi.org/10.1016/S0022-3913(12)60194-2
  13. Nishigawa G, Maruo Y, Oka M, Okamoto M, Minagi S, Irie M, Suzuki K. Effect of plasma treatment on adhesion of self-curing repair resin to acrylic denture base. Dent Mater J 2004;23:545-9. https://doi.org/10.4012/dmj.23.545
  14. Duske K, Koban I, Kindel E, Schroder K, Nebe B, Holtfreter B, Jablonowski L, Weltmann KD, Kocher T. Atmospheric plasma enhances wettability and cell spreading on dental implant metals. J Clin Periodontol 2012;39:400-7. https://doi.org/10.1111/j.1600-051X.2012.01853.x
  15. Koban I, Holtfreter B, Hubner NO, Matthes R, Sietmann R, Kindel E, Weltmann KD, Welk A, Kramer A, Kocher T. Antimicrobial efficacy of non-thermal plasma in comparison to chlorhexidine against dental biofilms on titanium discs in vitro - proof of principle experiment. J Clin Periodontol 2011;38:956-65. https://doi.org/10.1111/j.1600-051X.2011.01740.x
  16. Idlibi AN, Al-Marrawi F, Hannig M, Lehmann A, Rueppell A, Schindler A, Jentsch H, Rupf S. Destruction of oral biofilms formed in situ on machined titanium (Ti) surfaces by cold atmospheric plasma. Biofouling 2013;29:369-79. https://doi.org/10.1080/08927014.2013.775255
  17. Weltmann KD, Kindel E, Brandenburg R, Meyer C, Bussiahn R, Wilke C, von Woedtke T. Atmospheric pressure plasma jet for medical therapy: Plasma parameters and risk estimation. Contrib Plasma Phys 2009;49:631-40. https://doi.org/10.1002/ctpp.200910067
  18. Vogelsang A, Ohl A, Steffen H, Foest R, Schroder K, Weltmann KD. Locally resolved analysis of polymer surface functionalization by an atmospheric pressure argon microplasma jet with air entrainment. Plasma Process Polym 2010; 7:16-24. https://doi.org/10.1002/ppap.200900091
  19. Choi YH, Kim JH, Paek KH, Ju WT, Hwang YS. Characteristics of atmospheric pressure $N_2$ cold plasma torch using 60-Hz AC power and its application to polymer surface modification. Surf Coat Technol 2005;193:319-24. https://doi.org/10.1016/j.surfcoat.2004.08.145
  20. Lee SB, Kim YK. Adhesion improvement of polyimide/metal interface by He/$O_2/NF_3$ atmospheric pressure plasma. Plasma Process Polym 2009;6:525-9. https://doi.org/10.1002/ppap.200931111
  21. Han GJ, Chung SN, Chun BH, Kim CK, Oh KH, Cho BH. Effect of the applied power of atmospheric pressure plasma on the adhesion of composite resin to dental ceramic. J Adhes Dent 2012;14:461-9.
  22. Schneider R, de Goes MF, Henriques GE, Chan DC. Tensile bond strength of dual curing resin-based cements to commercially pure titanium. Dent Mater 2007;23:81-7. https://doi.org/10.1016/j.dental.2005.12.006
  23. dos Santos JG, Fonseca RG, Adabo GL, dos Santos Cruz CA. Shear bond strength of metal-ceramic repair systems. J Prosthet Dent 2006;96:165-73. https://doi.org/10.1016/j.prosdent.2006.07.002
  24. Valverde GB, Coelho PG, Janal MN, Lorenzoni FC, Carvalho RM, Thompson VP, Weltemann KD, Silva NR. Surface characterisation and bonding of Y-TZP following non-thermal plasma treatment. J Dent 2013;41:51-9. https://doi.org/10.1016/j.jdent.2012.10.002
  25. Marchesi G, Mazzoni A, Turco G, Cadenaro M, Ferrari M, Di Lenarda R, Breschi L. Aging affects the adhesive interface of posts luted with self-adhesive cements: a 1-year study. J Adhes Dent 2013;15:173-80.
  26. Papadopoulos T, Tsetsekou A, Eliades G. Effect of aluminium oxide sandblasting on cast commercially pure titanium surfaces. Eur J Prosthodont Restor Dent 1999;7:15-21.
  27. Watanabe I, Kurtz KS, Kabcenell JL, Okabe T. Effect of sandblasting and silicoating on bond strength of polymerglass composite to cast titanium. J Prosthet Dent 1999;82:462-7. https://doi.org/10.1016/S0022-3913(99)70035-1
  28. Petridis H, Garefis P, Hirayama H, Kafantaris NM, Koidis PT. Bonding indirect resin composites to metal: part 2. Effect of alloy surface treatment on elemental composition of alloy and bond strength. Int J Prosthodont 2004;17:77-82.
  29. Sarafianou A, Seimenis I, Papadopoulos T. Effectiveness of different adhesive primers on the bond strength between an indirect composite resin and a base metal alloy. J Prosthet Dent 2008;99:377-87. https://doi.org/10.1016/S0022-3913(08)60086-4
  30. Ozden N, Akaltan F, Suzer S, Akovali G. Time-related wettability characteristic of acrylic resin surfaces treated by glow discharge. J Prosthet Dent 1999;82:680-4. https://doi.org/10.1016/S0022-3913(99)70009-0
  31. Silva NR, Coelho PG, Valverde GB, Becker K, Ihrke R, Quade A, Thompson VP. Surface characterization of Ti and Y-TZP following non-thermal plasma exposure. J Biomed Mater Res B Appl Biomater 2011;99:199-206.
  32. Nishigawa G, Maruo Y, Oka M, Oki K, Minagi S, Okamoto M. Plasma treatment increased shear bond strength between heat cured acrylic resin and self-curing acrylic resin. J Oral Rehabil 2003;30:1081-4. https://doi.org/10.1046/j.1365-2842.2003.01198.x
  33. Fang Z, Yang H, Qiu Y. Surface treatment of polyethylene terephthalate films using a microsecond pulse homogeneous dielectric barrier discharges in atmospheric air. IEEE Trans Plasma Sci 2010;38:1615-23. https://doi.org/10.1109/TPS.2010.2048342
  34. Cho BH, Han GJ, Oh KH, Chung SN, Chun BH. The effect of plasma polymer coating using atmospheric-pressure glow discharge on the shear bond strength of composite resin to ceramic. J Mater Sci 2011;46:2755-63. https://doi.org/10.1007/s10853-010-5149-1
  35. Elsaka SE, Swain MV. Effect of surface treatments on adhesion of low-fusing porcelain to titanium as determined by strain energy release rate. Dent Mater 2011;27:1213-20. https://doi.org/10.1016/j.dental.2011.08.002
  36. Miyakawa O, Watanabe K, Okawa S, Kanatani M, Nakano S, Kobayashi M. Surface contamination of titanium by abrading treatment. Dent Mater J 1996;15:11-21. https://doi.org/10.4012/dmj.15.11
  37. Lim BS, Heo SM, Lee YK, Kim CW. Shear bond strength between titanium alloys and composite resin: sandblasting versus fluoride-gel treatment. J Biomed Mater Res B Appl Biomater 2003;64:38-43.
  38. Elsaka SE. Effect of surface pretreatments on the bonding strength and durability of self-adhesive resin cements to machined titanium. J Prosthet Dent 2013;109:113-20. https://doi.org/10.1016/S0022-3913(13)60026-8
  39. Ozcan M, Valandro LF. Bond strength of two resin cements to titanium after different surface conditioning methods. Gen Dent 2012;60:e6-12.
  40. ISO 10477. Dentistrypolymer-based crown and bridge materials. International Standards Organization (ISO); Geneva; Switzerland, 2004.
  41. Matsumura H, Yanagida H, Tanoue N, Atsuta M, Shimoe S. Shear bond strength of resin composite veneering material to gold alloy with varying metal surface preparations. J Prosthet Dent 2001;86:315-9. https://doi.org/10.1067/mpr.2001.114823

피인용 문헌

  1. Efficacy of uncommon surface treatment methods on titanium in order to improve bond strengths for adhesive cementation vol.30, pp.21, 2016, https://doi.org/10.1080/01694243.2016.1182825
  2. The effect of ultrafast fiber laser application on the bond strength of resin cement to titanium vol.32, pp.5, 2017, https://doi.org/10.1007/s10103-017-2216-8
  3. Anodic Growth and Characterization of Highly Nitrogen Doped Titanium Dioxide Nanotubes with Ordered Structure on Hot Argon DC Plasma Treated Titanium Substrates vol.28, pp.5, 2018, https://doi.org/10.1007/s10904-018-0883-y
  4. Repair Bond Strength of a Resin Composite to Plasma-Treated or UV-Irradiated CAD/CAM Ceramic Surface vol.8, pp.7, 2018, https://doi.org/10.3390/coatings8070230
  5. Effect of different surface treatments on the shear bond strength of luting cements used with implant-supported prosthesis: An in vitro study vol.12, pp.2, 2015, https://doi.org/10.4047/jap.2020.12.2.75
  6. Influence of Low-Pressure Plasma on the Surface Properties of CAD-CAM Leucite-Reinforced Feldspar and Resin Matrix Ceramics vol.10, pp.24, 2015, https://doi.org/10.3390/app10248856
  7. Molecular Species Generated by Surface Dielectric Barrier Discharge Micro-plasma in Small Chambers Enclosing Atmospheric Air and Water Samples vol.41, pp.1, 2015, https://doi.org/10.1007/s11090-020-10122-x
  8. Metallization by Sputtering to Improve the Bond Strength between Zirconia Ceramics and Resin Cements vol.12, pp.4, 2015, https://doi.org/10.3390/jfb12040062