DOI QR코드

DOI QR Code

Stress distribution on the real corrosion surface of the orthotropic steel bridge deck

  • Kainuma, Shigenobu (Department of Civil Engineering, Kyushu University) ;
  • Jeong, Young-Soo (Department of Civil Engineering, Kyushu University) ;
  • Ahn, Jin-Hee (Department of Civil Engineering, Gyeongnam National University of Science and Technology)
  • 투고 : 2013.03.16
  • 심사 : 2014.12.08
  • 발행 : 2015.06.25

초록

This study evaluated the localized stress condition of the real corroded deck surface of an orthotropic steel bridge because severe corrosion damage on the deck surface and fatigue cracking were reported. Thus, a three-dimensional finite element (FE) analysis model was created based on measurements of the corroded orthotropic steel deck surface to examine the stress level dependence on the corrosion condition. Based on the FE analysis results, it could be confirmed that a high stress concentration and irregular stress distribution can develop on the deck surface. The stress level was also increased by approximately 1.3-1.5 times as a result of the irregular corroded surface. It was concluded that this stress concentration could increase the possibility of fatigue cracking in the deck surface because of the surface roughness of the orthotropic steel bridge deck.

키워드

참고문헌

  1. American Association of State Highway and Transportation Officials (AASHTO) (1998), LRFD Bridge Design Specifications; (2nd Ed.), Washington D.C., USA.
  2. Battista, R.C. and Pfeil, M.S. (2004), "Strengthening fatigue-cracked steel bridge decks", J. Bridge Eng., 157(2), 93-102.
  3. Battista, R.C., Pfeil, M.S. and Carvalho, E.M.L. (2008), "Fatigue life estimates for a slender orthotropic steel deck", J. Construct. Steel Res., 64(1), 134-143. https://doi.org/10.1016/j.jcsr.2007.03.002
  4. Cheng, X., Murakoshi, J., Nishikawa, K. and Ohashi, H. (2004), "Local stresses and fatigue durability of asphalt paved orthotropic steel decks", Proceedings of 2004 Orthotropic Bridge Conference, Sacramento, CA, USA, August.
  5. Choi, S.M., Tateishi, K., Kim, I.T., Seo, W.C. and Lee, D.U. (2008), "Fatigue strength improvement of U-type trough rib at field Welded Joint in steel bridge deck", Int. J. Steel Struct., 8(3), 215-223.
  6. Connor, R.J. and Fisher, J.W. (2005), "Field testing of orthotropic bridge decks", Int. J. Steel Struct., 5(3), 225-231.
  7. Fryba, L. and Urushadze, Sh. (2011), "Improvement of fatigue properties of orthotropic decks", Eng. Struct., 33(4), 1166-1169. https://doi.org/10.1016/j.engstruct.2010.12.036
  8. International Institute of Welding (IIW) (2008), Recommendations for Fatigue Design of Welded Joints and components; XIII-2151r4-07/XV-1254r4-07, New York, NY, USA.
  9. Jeong, Y.S., Kainuma, S. and Ahn, J.H. (2013), "Structural response of orthotropic bridge deck depending on the corroded deck surface", Construct. Build. Mater., 43, 87-97. https://doi.org/10.1016/j.conbuildmat.2013.01.011
  10. Kainuma, S., Yamada, K., Johsen, Y., Iwasaki, M. and Nishikawa, T. (1996), "Test and analysis of Influence of cracked ribs on orthotropic steel deck", J. Struct. Eng., 42A, 927-936. [In Japanese]
  11. Kainuma, S., Jeong, Y.S., Utsunomiya, K. and Ahn, J.H. (2012), "Numerical simulations for time-dependent corrosion surfaces of unpainted carbon steel plates in atmospheric corrosive environments using spatial statistical techniques", Corrosion Eng., 61(7), 203-212.
  12. Pfeil, M.S., Battista, R.C. and Mergulhao, A.J.R. (2005), "Stress concentration in steel bridge orthotropic decks", J. Construct. Steel Res., 61(8), 1172-1184. https://doi.org/10.1016/j.jcsr.2005.02.006
  13. Sakiya, K., Sugiyama, Y. and Yoshiyuki, T. (2007), "Crack penetration of orthotropic steel bridge deck by corrosion in Nishinomiya Osaka line", Proceedings of the 42nd Hanshin Expressway Technical Research Conference, Osaka, Japan, May. [In Japanese]
  14. Wolchuk, R. (1990), "Lessons from weld cracks in orthotropicdecks on three European bridges", J. Struct. Eng., 116(1), 75-84. https://doi.org/10.1061/(ASCE)0733-9445(1990)116:1(75)
  15. Yoshihiko, T., Minoru, K., Takashi N. and Kimihisa, U. (2009), "Fatigue failure assessment of actual-working load and run location on orthotropic steel deck applied in BWIM", J. Struct. Eng., 55A, 1456-1467. [In Japanese]

피인용 문헌

  1. Behavior and stress of orthotropic deck with bulb rib by surface corrosion vol.113, 2015, https://doi.org/10.1016/j.jcsr.2015.05.014
  2. An experimental and numerical study on the behavior of a continuous orthotropic bridge deck with sandwich construction vol.111, 2017, https://doi.org/10.1016/j.tws.2016.11.015
  3. Experimental and numerical investigations on remaining strengths of damaged parabolic steel tubular arches vol.34, pp.1, 2015, https://doi.org/10.12989/scs.2020.34.1.001
  4. Fatigue property analysis of U rib-to-crossbeam connections under heavy traffic vehicle load considering in-plane shear stress vol.38, pp.3, 2015, https://doi.org/10.12989/scs.2021.38.3.271