한국전산유체공학회지 (Journal of computational fluids engineering)

한국전산유체공학회 (Korean Society of Computational Fluids Engineering)
권호 표지
DOI QR코드

DOI QR Code

열사이펀의 형상비와 충전율에 따른 열전달 성능 해석

ANALYSIS OF HEAT TRANSFER PERFORMANCE WITH ASPECT AND FILLING RATIOS IN THERMOSYPHON

  • 김영철 (순천대학교 대학원 우주항공공학과) ;
  • 최종욱 (순천대학교 기계우주항공공학부) ;
  • 김성초 (순천대학교 기계우주항공공학부)
  • Kim, Y.C. (Dept. of Aerospace Engineering, Graduate School, Sunchon National Univ.) ;
  • Choi, J.W. (School of Mechanical and Aerospace Engineering, Sunchon National Univ.) ;
  • Kim, S.C. (School of Mechanical and Aerospace Engineering, Sunchon National Univ.)
  • 투고 : 2015.01.30
  • 심사 : 2015.03.24
  • 발행 : 2015.03.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Thermal-fluid analysis is performed numerically to figure out the characteristics of heat transfer in a thermosyphon varying with the aspect ratio of geometry and the filling ratio of working fluid. The computational results are reasonable compared with the experimental data and visualized. The thermal resistance and the convective heat transfer coefficients are evaluated with the aspect ratio of thermosyphon and the filling ratio of working fluid, respectively. In conclusion, the thermal resistance decreases as the length of evaporator increases. However, the variation of a condenser length is nearly independent on the thermal resistance. In order to raise the performance of thermosyphon, the working fluid needs to be filled over 75%. In addition, Nusselt numbers in the evaporator and the condenser show 275 and 304, respectively.

키워드

참고문헌

  1. 2010, Kiseev, V.M., Vlassov, V.V., and Muraoka, I., "Experimental Optimization of Capillary Structures for Loop Heat Pipes and Heat Switches," Applied Thermal Engineering, Vol.30, pp.1312-1319. https://doi.org/10.1016/j.applthermaleng.2010.02.010
  2. 2013, Samba, A., Louahlia-Gualous, H., Masson, S.L., and Norterhauser, D., "Two-phase Thermosyphon Loop for Cooling Outdoor Telecommunication Equipments," Applied Thermal Engineering, Vol.50, pp.1351-1360. https://doi.org/10.1016/j.applthermaleng.2012.05.023
  3. 2008, Zhang, M., Liu, Z., and Ma, G., "The Experimental Investigation on Thermal Performance of a Flat Two-phase Thermosyphon," International Journal of Thermal Sciences, Vol.47, pp.1195-1203. https://doi.org/10.1016/j.ijthermalsci.2007.10.004
  4. 2013, Fadhl, B., Wrobel, L.C., and Jouhara, H., "Numerical Modelling of the Temperature Distribution in a Two-phase Closed Thermosyphon," Applied Thermal Engineering, Vol.60, pp.122-131. https://doi.org/10.1016/j.applthermaleng.2013.06.044
  5. 2013, Huminic, G., and Huminic, A., "Numerical Study on Heat Transfer Characteristics of Thermosyphon Heat Pipes Using Nanofluids," Energy Conversion and Management, Vol.76, pp.393-399. https://doi.org/10.1016/j.enconman.2013.07.026
  6. 2005, Noie, S.H., "Heat Transfer Characteristics of a Two-phase Closed Thermosyphon," Applied Thermal Engineering, Vol.25, pp.495-506. https://doi.org/10.1016/j.applthermaleng.2004.06.019
  7. 2010, Amatachaya, P. and Srimuang, W., "Comparative Heat Transfer Characteristics of a Flat Two-phase Closed Thermosyphon (FTPCT) and a Conventional Two-phase Closed Thermosyphon (CTPCT)," International Communications in Heat and Mass Transfer, Vol.37, pp.293-298. https://doi.org/10.1016/j.icheatmasstransfer.2009.11.004
  8. 2011, Ansys Fluent, Theory Guide (Release 14.0) Multiphase Flows, ANSYS Inc., pp.491-616.
  9. 1992, Brackbill, J.U., Kothe, D.B., and Zemach, C., "A Continuum Method for Modeling Surface Tension," Journal of computational physics, Vol.100, pp.335-354. https://doi.org/10.1016/0021-9991(92)90240-Y
  10. 2009, Schepper, S.C.K.D., Heynderickx, G.J., and Marin, G.B., "Modeling the Evaporation of a Hydrocarbon Feedstock in the Convection Section of a Steam Cracker," Computers & Chemical Engineering, Vol.33, pp.122-132. https://doi.org/10.1016/j.compchemeng.2008.07.013
  11. 2014, Kim, Y., Choi, J., Kim, S., and Zhang, Y., "Effects of Mass Transfer Time Relaxation Parameters on Evaporation and Condensation in a Thermosyphon," Journal of Enhanced Heat Transfer, Submitted on 2014 (Manuscript ID : JEH(T)-12069).

피인용 문헌

  1. 기포펌프의 형상 및 작동 조건에 따른 전산유동해석 vol.18, pp.2, 2015, https://doi.org/10.5407/jksv.2020.18.2.018